17-4 Age-Hardening Martensitic Stainless Steel – Properties, Composition, Heat Treatments and Specif
17-4 stainless steel is an age-hardening martensitic alloy combining high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short-time, simple low-temperature treatment. A detailed set of properties, chemical composition range and applications are provided.
|
1700°C Hotspot Laboratory Furnaces from Zircar Zirconia
Now for the first time, a 1700°C Lab Furnace that can simply be plugged into a standard 110 Volt, 20 Amp outlet without the need for either a 220 V supply or an electrician is available from Zircar Zirconia.
|
188 Alloy - A Cobalt Alloy with Excellent High Temperature Strength from United Performance Metals
188 Alloy is a cobalt-base alloy with excellent high temperature strength and good oxidation resistance to 2000°F (1093°C). The alloy also has good sulfidation resistance and excellent metallurgical stability displayed by its good ductility after prolonged exposure to elevated temperatures.
|
3-D Photonic Band Gap Crystals Created without the Use of a Clean Room - News Item
Achieving a first in the world of novel optical materials, researchers at the U. S. Department of Energy's Ames Laboratory are making 3-D photonic band gap crystals four millimeters squareand 12 layers high without benefit of a "clean room". Posted July 25 2005
|
300M Alloy - Vacuum Melted Silicon-Vanadium Steel Alloy from Super Alloys
300M is a low alloy, vacuum melted, steel of very high strength. Essentially it is a modified AISI 4340 steel with silicon, vanadium and slightly more carbon and molybdenum. 300M has a very good combination of strength toughness, fatigue strength and good ductility
|
3300 Series Single Column Testing System from Instron - New Product
Instron's 3300 series single column testing system is designed to test tensile, compression and flexural properties of rubber, plastic, wire, metals and fasteners. The 3300 series is a cost-effective mechanical tester. Posted July 2006
|
36th International Symposium for Testing and Failure Analysis (ISTFA 2010) - ASM International
Enrich your career at the 36th International Symposium for Testing and Failure Analysis, November 14-18 in Dallas, Texas. Acquire the latest knowledge from the field's leading professionals with six days of tutorials, short courses, technical presentations, panels, and user groups.
|
3D Systems Announces the Availability of Engineered Nano-Composite Bluestone™ SL Material for SLA® S
3D Systems Corporation announced the availability of Bluestone™ SL material, the first commercially available engineered nano-composite resin for SLA® (stereolithography) systems. Posted July 29 2004
|
404GP Stainless Steel – The Ideal Alternative to 304 Stainless Steel – Properties and Benefits of 40
Grade 404GP can be used instead of grade 304 stainless steel in most applications. The corrosion resistance of grade 404GP is at least as good as grade 304, usually better. This article contains a detailed list of properties and corrosion resistance information.
|
445M2 Stainless Steel – The Ideal Alternative to 316 Stainless Steel – Applications and Properties b
Marine grade stainless steel 316 has been around for a long time. Now there’s an alternative, that’s even better – grade 445M2 from Austral Wright Metals. 445M2 is compared to 316 and properties and applications of 445M2 are provided.
|
| page:
«
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
»
|
|
|
|
