Springer have nearly 200 new titles on display at MRS in Boston

Zetasizer Nano ZS – Particle Size Analysis, Zeta Potential and Molecular Weight Measurement – Malvern Instruments

Mid-Mountain Materials - A leading manufacturer of industrial textiles

Approved Professional Development Courses from Loughborough University

Dynamic Ceramic a UK based manufacturer and supplier of Ceramic Components. The UK's leading specialist producer of zirconia, alumina and other advanced ceramics.

Zwick Roell / Your Partner for Materials Testing

Oxford instruments - materials identification, OES and XRF

Adsorbents

Back One

Your Search returned these results:

page: « 1 »

Effects of Organic Additives on Physical And Chemical Characteristics of Basic Aluminum Sulfate
In this work, the effects of cationic, anionic and neutral organic additives on the physical and chemical characteristics of BAS obtained by homogeneous precipitation were investigated. DEA and chitosan were used as cationic additives, whereas DLS was selected as anionic additive.

Layered Double Hydroxide and its Anion Exchange Capacity
Layered double hydroxide (LDH) is a class of ionic lamellar solids with positively charged layers with two kinds of metallic cations and exchangeable hydrated gallery anions. Crystallinity, morphology and anion exchange capacities of Mg-Al-LDH with varing composition & ageing temperature were tested

Mercury Porosimetry Using AutoPore Porisimeters From Micromeritics
Mercury porosimetry characterizes a material’s porosity by applying various levels of pressure to a sample immersed in mercury. The pressure required to intrude mercury into the sample’s pores is inversely proportional to the size of the pores.

Preparation of Sodium Aluminate From Basic Aluminium Sulfate
A method for preparing sodium aluminate from basic aluminum sulfate (BAS) is presented. By this method, crystalline sodium aluminate could be obtained under mild conditions by heating sodium dawsonite at 900°C for 30 minutes.

Room Temperature Adsorption Measurements of Gases and Vapours on Molecular Sieves, Microporous Mater
Room Temperature Option for the Gemini analyzer is now available. This option allows you to measure gas and vapor adsorption on samples at temperatures in the range of -70°C to +100°C. The Room Temperature Option provides a faster, simpler way to characterize adsorbents.

Ti-Modified Mesoporous Materials Synthesized for Chromium Adsorption
Several Ti-Modified MCM-41 materials were prepared and characterized in order to study the effect of this modification on chromium adsorption capacity. Research has been driven by rapidly growing emerging applications such as adsorption to remove specific contaminants in aqueous solution.

page: « 1 »

Δ Top

Back One

Particle Size Evaluation and Analysis Instruments - Micromeritics

CILAS state of the art laser particle size analyzers

University of Surrey-Short Courses and MSc in Materials science

$X-Ray diffractometers from Shimadzu$

ASM Handbook Volume 22A: Fundamentals of Modeling for Metals Processing (Pre-Publication)