300M Alloy - Vacuum Melted Silicon-Vanadium Steel Alloy from Super Alloys
300M is a low alloy, vacuum melted, steel of very high strength. Essentially it is a modified AISI 4340 steel with silicon, vanadium and slightly more carbon and molybdenum. 300M has a very good combination of strength toughness, fatigue strength and good ductility
|
3D Systems Announces the Availability of Engineered Nano-Composite Bluestone™ SL Material for SLA® S
3D Systems Corporation announced the availability of Bluestone™ SL material, the first commercially available engineered nano-composite resin for SLA® (stereolithography) systems. Posted July 29 2004
|
Ab Initio Thermodynamics of Oxide Phase Stability - Supplier Data By Accelrys
The stability of metals and metal oxides at elevated temperatures is a crucial problem in many industries. To address this, scientists at Accelrys employed a combination of tools (classical thermodynamics & ab initio quantum mechanics) to compute Ellingham diagrams, plots of the standard free energy
|
Abradable Coatings Increase Gas Turbine Engine Efficiency
The use of abradable coatings has enabled increased efficiency gas turbine engines by reducing the clearances between fan and shroud and increasing the operating temperature. They can be applied to many other rotating machines by thermal spray processes.
|
Accelerating Product Development – Nanotechnology Expertise and Facilities for Product Commercialisa
The Centre of Excellence in Metrology for Micro and Nano Technologies (CEMMNT) have the expertise and testing facilities available to assist companies in accelerate development of new products from initial conceptualisation through to evaluation and testing of prototypes and manufacture of final dev
|
Acetal Polyoxymethylene - POM 30% Carbon Fibre Reinforced
Thermoplastic. Significantly increased flexural modulus, with significant reduction in elongation at break compared with unmodified Acetal. Advantages, disadvantages and applications are listed together with a table of typical properties.
|
Acetal Polyoxymethylene Homopolymer - POM
Contains a general overview of the polymer Acetal Polyoxymethylene Homopolymer including relative advantages, disadvantages and applications, together with a table of typical properties.
|
Acrylonitrile Butadiene Styrene - ABS 30% Glass Fibre Reinforced
The fibre reinforcement reduces the coefficient of thermal expansion and lowers mould shrinkage compared with standard ABS grades. Advantages, disadvantages and applications are listed together with a table of typical properties it is a thermoplastic.
|
Acrylonitrile Butadiene Styrene - ABS Generic
Thermoplastic. Good hardness for a plastic accompained by good toughness. Good processability. Poor solvent and fatigue resistance. Advantages, disadvantages and applications are listed.
|
Acrylonitrile Butadiene Styrene - ABS High Impact High Heat
Higher heat distortion temperature than conventional grades of ABS. However, requires higher mould surface temperatures. Advantages, disadvantages and applications are listed together with a table of typical properties for this thermoplastic.
|
| page:
«
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
»
|
|
|
|
