17-4 Age-Hardening Martensitic Stainless Steel – Properties, Composition, Heat Treatments and Specif
17-4 stainless steel is an age-hardening martensitic alloy combining high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short-time, simple low-temperature treatment. A detailed set of properties, chemical composition range and applications are provided.
|
300M Alloy - Vacuum Melted Silicon-Vanadium Steel Alloy from Super Alloys
300M is a low alloy, vacuum melted, steel of very high strength. Essentially it is a modified AISI 4340 steel with silicon, vanadium and slightly more carbon and molybdenum. 300M has a very good combination of strength toughness, fatigue strength and good ductility
|
404GP Stainless Steel – The Ideal Alternative to 304 Stainless Steel – Properties and Benefits of 40
Grade 404GP can be used instead of grade 304 stainless steel in most applications. The corrosion resistance of grade 404GP is at least as good as grade 304, usually better. This article contains a detailed list of properties and corrosion resistance information.
|
445M2 Stainless Steel – The Ideal Alternative to 316 Stainless Steel – Applications and Properties b
Marine grade stainless steel 316 has been around for a long time. Now there’s an alternative, that’s even better – grade 445M2 from Austral Wright Metals. 445M2 is compared to 316 and properties and applications of 445M2 are provided.
|
445M2 Stainless Steel – Use of Stainless Steel Grade 445M2 in a Nickel Smelter by Austral Wright Met
Nickel-free 445M2 stainless steel is a viable alternative to 316 stainless steel. This case study shows how it has been used in a nickel smelter. Advantages over 3216 are provided along with properties of 445M2 stainless steel.
|
A-286 High Strength Iron-Based Superalloy – Properties, Composition, Heat Treatments and Specificati
A-286 is an age-hardenable iron base superalloy for applications requiring high strength from -320°F up to 1000°F long time, 1300-1500°F short time. Oxidation resistance is high for continuous service to 1500°F, intermittent to 1800°F. Detailed properties are supplied along with applications.
|
Abrasion Resistant Steel Plate - Features, Applications and Grades of Abrasion Resistant Steel by Masteel
Also known as abrasion resistant steel plate, the high resistant long life plates can be cut and profiled to your exact requirements. Combined with excellent weldability abrasion resistant steel plate stands up well in the toughest industries such as mining and earth moving.
|
Abrasive Slag Managed With Basalt Lined Pipe - Supplier Data By Abresist
Blue Circle’s Sparrows Point, MD. plant has been using a basalt-lined pipe for handling abrasive blast furnace slag for 17 years without needing to replace it.
|
Adhesive Bonding - A Designers Guide on Development of Advanced Medical Adhesives by Master Bond
Advanced adhesives can improve the assembly of disposable and reusable medical devices. Lap joints work well in medical device assemblies.The growth of high performance plastics has significantly widened the options for designing and bonding disposable and reusable medical devices.
|
Adhesive Bonding - Features and Development of High Performance Epoxy Resin Adhesive Bonding Systems by Master Bond
Adhesive bonding, especially when it incorporates epoxy resins, is becoming more and more accepted as a cost-effective production method across many industries. Epoxy resins are a technically and economically attractive alternative to mechanical fasteners.
|
| page:
«
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
»
|
|
|
|
