Topics Covered
Master Bond EP30DP Features Repairability
and Abrasion ResistanceAdvantages of Two Component Epoxy
SystemsCutting Edge FormulationsOutstanding Technical SupportLatest Technological
Advancements About Master Bond
Master Bond EP30DP Features Repairability and Abrasion
Resistance
Two component, room temperature curing elastomeric Master Bond
EP30DP has exceptional toughness, abrasion resistance and is cryogenically
serviceable. EP30DP has a low viscosity and can be cast in thick cross sections
(e.g. several inches) without the development of excess exotherm during cure. It
has high strength properties and outstanding impact and fatigue
resistance.EP30DP also has low water absorption, low moisture permeability and
high hydrolytic stability.
.jpg)
Master Bond EP30DP has a 100 to 10 mix ratio by weight. It has a working life
of 2 ½ to 3 hours for a 100 gram mass at 75°F. Cures can be accelerated by use
of heat. Elongation at break is 80%. EP30DP is 100% reactive and does not
contain any solvents or volatiles. It is readily repairable and can be easily
removed with a razor blade or similar tool. Formulations do not contain any free
isocyanate and EP30DP is quite safe to us when proper industrial hygiene
practices are observed.
This compound has excellent electrical insulation properties and will withstand
exposure to thermal cycling. Shore D hardness is 85. It has a tensile
strength of 1,450 psi and a dielectric strength of > 420 volts/mil. This
unique polymer system has a shelf life of 6 months in original unopened
containers stored at 75°F. It is available for use in ½ pint, pint, quart,
gallon, and 5 gallon kits.
Advantages of Two Component Epoxy Systems
Master Bond two part epoxy adhesive systems can produce assemblies
mechanically equivalent to or stronger than conventional metal fastened parts at
a lower cost and weight. They also offer:
- Resistance to vibration and shock
- Ability to withstand thermal cycling
- Fast cures at ambient temperatures
- Gap filling capability
- Exceptional adhesion to similar and dissimilar substrates
- Uniform stress distribution
- Long-term durability
- Easy application
- Solvent free formulation
- Dimensional stability
Cutting Edge Formulations
The Master Bond product line consists of advanced epoxies, silicones,
polyurethanes, polysulfides, UV/LED cures and other specialty systems. Each
compound is designed to meet specific application requirements. Master Bond
environmentally friendly systems are available in convenient packaging from
small to large sizes.
Outstanding Technical Support
With years of experience in technical
support, the Master Bond team will be able to assess your application and
recommend the most suitable polymer system to meet your specifications. Master
Bond will continue to guide you throughout the design, prototype and
manufacturing process. Master Bond offers replacements for discontinued
products.
Latest Technological Advancements
As a worldwide manufacturer of polymer compounds, Master Bond is continuously
working with universities and R&D labs to improve product performance.
Master Bond products are designed to maximize productivity, reduce waste, save
energy and for dependable, long term durability.
About Master Bond
Master Bond is a leading adhesive manufacturer offering high quality
adhesives, sealants, coatings, and potting compounds. Master Bond’s product line
consists of epoxy adhesives, polyurethane, silicone, cyanoacrylate and latex
adhesives. Master Bond’s structural adhesives offer design flexibility and
provide excellent bonding performance with a vast array of 3,000 custom designed
adhesive formulations. Adhesive properties differ in viscosity, cure speed,
chemical and temperature resistance, strength, electrical and thermal
conductivity. Specific adhesive systems can be designed to meet USP Class VI
certification for medical use or NASA requirements for low outgassing. Master
Bond products are successfully implemented in medical, optical, aerospace,
electronic, and other hi-tech industries.
.png)
Source: Master Bond.
For more information on this source please visit Master
Bond.