VpCI® Impregnated Foam Tapes With Adhesive Backing

Powerful Corrosion Protection for Delicate Electrical and Electronic Equipment! Complex electronic and electrical components are particularly susceptible to damage by corrosive environments because of their manufacturing processes and small size. Corrosion that occurs during shipping, storage, and field operations causes expensive failures but with the right approach can be stopped at any step from manufacturing to final installation.

Ecosonic® is a line of products especially created by Cortec® Corporation for corrosion protection of most sensitive equipment and parts. EcoSonic® products significantly extend equipment life and reduce the cost of expensive repairs.

Patented non-toxic ElectriCorr® VpCI®-150 Tape powered by Nano VpCI® protects metal in enclosed spaces from corrosion. This economical electro-static dissipative tape provides powerful multi-metal protection during operation and shutdown and is effective in control boxes or cabinets to protect most delicate electronic components. ElectriCorr® VpCI®-150 Tape will enable protection during operation, shipping, or storage and is very effective in polluted and humid environments.

The tape will not interfere with electrical, electronic, optical, or mechanical surface properties. This compact product is space saving, unobtrusive, and quick and easy to install. Free of nitrites, silicones, and phosphates and with very low VOC values, this safe to handle tape provides continuous protection for up to 24 months as well as antistatic protection commercially equivalent to military specification MIL-B-81705C. It has excellent ability to wick away moisture and no spraying, wiping, or dipping is required.

TYPICAL APPLICATIONS

  • Operating, packaged, and stored electrical equipment                                                                                                                    
  • Marine navigation and communication equipment
  • Electrical and electronic enclosures
  • Electric motors, AC, and DC
  • Switching equipment - low and high voltage
  • Fuse boxes and power boxes
  • Medical equipment
  • Electrical RF, electronic wire ways, and terminal boxes
  • Scientific and measuring instruments
  • Telecommunications equipment
  • Remote electronic devices
  • All conductive leads, connectors, and terminals

Cortec® patented VpCI® technology prevents corrosion through its unique Vapor phase Corrosion Inhibitor action. VpCIs adsorb on to metal surfaces creating a molecular layer of protection.  ElectriCorr® VpCI®-150 Tape powered by Nano-VpCI® is effective against a variety of corrosive agents including salt, airborne contaminants, H2S, SO2, NH3, and others. It protects up to 0.4 ft3 (11.3 liters) per linear inch (2.5 cm). VpCI®-170 protects up to 1 ft3 (28.3 liter) by volume per linear inch (2.5 cm).

ElectriCorr® VpCI®-150 Tape powered by Nano VpCI® is accepted by Canadian Food Inspection Agency for indirect contact with food and packaging equipment. It conforms to VIA Test per MIL-B-22110, NATO #8030-00-244-1299 and NSN #8030-01-208-1769 standards. Commercial equivalent to MIL-B-81705C for static dissipative materials and meets Southern California Clean Air Act and other national and local regulations. It is USDA approved.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit