Site Sponsors
Site Sponsors
  • Dynamic-Ceramic: UK supplier of advanced ceramics - zirconia and alumina products

Search

Request for Quote (RFQ): If you'd like us to help you source a Quotation for any particular products or from any suppliers, please click here. Once submitted, we will try and place you in contact with a suitable supplier within 48 hours.
Search is Loading...
Results 1 - 10 of 656 for Al-Si.
Search
Next>
  • HRTEM Characterization Of Melt-Spun Al-Si-Cu-Mg Alloys Solidified At Different Rates
    Six quaternary alloys Al-6Si-3Cu-xMg were produced by melt spinning using two different tangential speeds of the copper wheel and characterized using optical microscopy (OM), scanning electron...
    http://www.azom.com/article.aspx?ArticleID=3620 | 29 Dec 2006
  • Magnesium Alloys - Zirconium Free Casting Alloys
    These alloys are light weight, high strength and cheaper than zirconium containing nagnesium alloys. They find applications in the aeropsace, automotive industries as well as electronics, sporting...
    http://www.azom.com/article.aspx?ArticleID=356 | 4 May 2001
  • Abradable Coatings Increase Gas Turbine Engine Efficiency
    The use of abradable coatings has enabled increased efficiency gas turbine engines by reducing the clearances between fan and shroud and increasing the operating temperature. They can be applied to...
    http://www.azom.com/article.aspx?ArticleID=739 | 23 Aug 2001
  • Design-Synthesis-Evaluation of CrN-Based Nanocomposite Hard Coating
    In this study, the microstructural design, synthesis and evaluation for the quaternary Cr-Al-Si-N coatings were investigated. Also, the overall comparisons among CrN, Cr-Al-N, Cr-Si-N, and Cr-Al-Si-N...
    http://www.azom.com/article.aspx?ArticleID=5547 | 22 Nov 2010
  • Titanium Alloys - Classifications
    Titanium alloys can be classified either by structure or strength. The main structures are alpha, beta and alpha-beta, which are described. Different strength classifications also exist, and this is...
    http://www.azom.com/article.aspx?ArticleID=1218 | 30 Jan 2002
  • Leaching of Geopolymers in Deionised Water
    Geopolymers are materials similar to Portland cement but made from natural aluminosilicates. Geopolymers made from industrial byproducts like flyash and blast furnace slag may be used to encase...
    http://www.azom.com/article.aspx?ArticleID=3826 | 1 Jun 2007
  • Mechanical and Biological Characterization of Geopolymers for Potential Application as Biomaterials
    In this study three different geopolymer compositions have been investigated and characterized as potential biomaterials.
    http://www.azom.com/article.aspx?ArticleID=6035 | 19 May 2012
  • Factors to Enhance Thermal Conductivity of ß-Si3N4 Ceramics (Review)
    Research on processing â­“i3N4 ceramics and their thermal conductivity are reviewed. Thermal conductivities are greatly affected by processing parameters such as purity of raw powders, type and amount...
    http://www.azom.com/article.aspx?ArticleID=3173 | 11 Jan 2006
  • Titanium Alloys - Physical Properties
    Physical properties of titanium and titanium alloys such as density strength, thermal conductivity, electrical resistivity, magnetic properties, elastic modulus, poissons ratio, tensile strength,...
    http://www.azom.com/article.aspx?ArticleID=1341 | 2 Apr 2002
  • Titanium Boron Aluminium Grain Refiners for Aluminium – Silicon Alloys (Al-Si)
    The use of Titanium Boron Aluminium grain refiners in castings helps improve die filling and mass feeding, to counteract solidification shrinkage. This results in an improved distribution of porosity,...
    http://www.azom.com/article.aspx?ArticleID=3354 | 7 Apr 2006
Result Page 12345678910