Since 1947, Insaco has been synonymous with excellence in the development and production of high precision machined parts. As a custom fabricator of ceramic, glass, sapphire, and other hard materials, Insaco specializes in machining parts that often require tolerances measured in millionths of an inch, and wear properties that satisfy even the most demanding applications.
Advanced Ceramic Materials Machined by Insaco
Insaco is a precision machining company that fabricates parts from all technical ceramics, sapphire and quartz.
Materials machined by Insaco include:
- Alumina 94%
- Alumina 99.5%
- Alumina 99.9%
- Zirconia Toughened Alumina
- Sapphire (single crystal) Alpha Alumina Oxide
- Aluminum Nitride (Al-N)
- Silicon Nitride - hot pressed (Si3N4)
- Boron Carbide B4C
- Silicon Carbide - reaction bonded (SiC+Si+C)
- Silicon Carbide - sintered (SiC)
- Silicon Carbide - CVD(SiC)
- Tungsten Carbide
- Silicon (Si)
Precision Ensured Using a Mitutoyo Coordinate Measuring Machine
When working large size pieces, up to 4’ x 4’ x 3’, and needing to maintain accuracy of your measurements down to one half micron, Insaco’s coordinate measuring machine (CMM) is the ideal solution for measuring and documenting the critical tolerances needed. With completely updated software that enhances the speed and accuracy of the process, in part due to thermal compensation, we are able to certify accuracy of machining on all large pieces, including those from our Johnford VMC (envelope size 102” x 70” x30”). This CMM also has the capability to set up multiple smaller pieces within the same test cycle, and still maintain the same accurate measurements enhancing quality and productivity.
The Mitutoyo coordinate measuring machine (CMM) at Insaco.
This information has been sourced, reviewed and adapted from materials provided by INSACO Inc.
For more information on this source, please visit INSACO Inc.