3D Scanning Inspection System – Cyber Gage 360

The CyberGage®360 offers an extraordinary combination of speed, accuracy and one-button simplicity for non-contact automated 3D scanning inspection.

The CyberGage®360 radically accelerates quality assurance of in-process inspection and/or outgoing/incoming parts inspection; reduces cost of quality and speeds up product time-to-market.

The CyberGage®360 is designed for use in general purpose metrology. It has a range of applications from medical to aerospace to automotive to consumer electronics, where high speed throughput and high accuracy are crucial.

High-Precision Accuracy with Multiple Reflection Suppression (MRS) Sensor Technology

  • Generates an automated, extremely precise, full 360° volumetric scan with NIST traceable accuracy to 7 µm + L/10000
  • Includes CyberOptics’ proprietary 3D Multi-Reflection Suppression (MRS) technology that enables metrology-grade accuracy by hindering optical measurement distortion and reflections

Easy-to-use Software with Push-Button Automation

  • Provides factory-friendly operation with minimal training
  • Streamlines scanning with one-button simplicity
  • Programs off-line with pre-defined inspection templates
  • Produces automated inspection reports including a comparison of scan data to CAD models or models based on ‘golden’ examples
  • Eliminates inspection gages with fixtureless design
  • Speeds part program selection with Bar Code Part ID
  • Offers rapid and simple field recalibration

Automated 3D Volumetric Part Scan and Inspection Report in Less Than Three Minutes

  • Quickly generates a very precise, full 360° volumetric 3D surface scan of complex shaped parts in <3 minutes
  • Facilitates near-production line high-volume scanning and high speed throughput

Specifications

Work Volume 8” x 4” (Cylinder 200 mm diameter x 100 mm high)
System Configuration MRS Sensor technology with 2 scanners (1 above and 1 below)
System Volumetric Accuracy 7 µm; 0.007 mm +L/10000 mm (ISO 10360)
Repeatability 5 µm; 0.005 mm/0.00020
Speed 16 million points/part/pose. Typical cycle time <3 minutes

*Specifications may change without notice.

1 Accuracy is the maximum permissible error of the measured length between six sets of sphere features, repeated 10 times. These distances differ in length from approximately 30 mm to 150 mm. Measurements are done utilizing the CyberGage®360’s standard operating procedure, and include all possible hardware and software error sources.

2 Repeatability is the allowable 3 Sigma error of the measured diameter of a ring gage, repeated 10 times. Measurements are made utilizing the CyberGage®360’s standard operating procedure, and include all potential software and hardware error sources.

Other Equipment by this Supplier