Customized Five Station M500-AT Machine

The M500-ATMS is a modified version of Testomeric’s standard M500-AT materials testing machine. It features five stations where tests can be held simultaneously, along with colour display that can visualize the results and statistics of these tests in real time. There are ports for a printer connection to produce a full test report.

If your company is involved in volume testing then this may be the machine for you. Being able to perform five tests at once, testing time is dramatically reduced, and is much more cost effective and space saving when compared to using several of the same machine.

A CT version that operates from the end users own PC system is also available.

Force Measurements

Universally calibrated, better than Grade 0.5 EN 7500-1, DIN 51221 ASTM E-4. AFNOR A03-501. Range 0.4% to 100% minimum.  Automatic identification of load cell. Resolution 1 part in 500000 with autoranging.  Electronic load cell protection.

Extension Measurements

Full frame length to 0.001 mm. Resolution 0.001 min. Accuracy 0.01 mm. Absolute, relative and auxiliary modes mm, inch and percent. Programmable extension limits.

Speed Control

Drive system temperature and current protection. Positional jog speed 0.001 mm/min to maximum. Speed setting increments 0.001 mm/min.

Load Frame

Rigid frame, using dual slide crosshead guidance system and rigid extruded support column. Frame stiffness 5 kN/mm plus K factor facility built-in. Re-circulating ball screw with bellows. Electronic limit trips, total travel trips and customer programmable safety stops. Rubber mat front protection.

Software

This system runs on the comprehensive winTest™ Analysis universal windows software. This complete package covers tensile, compression, peel, shear, tear, cyclic, creep and multi stage testing. It also comes with a large range of industry standard test methods as well as the ability to program and store as many custom testing methods as necessary.

All data produced from testing is automatically stored and can easily be transferred to other processing software such as word, excel, access and SPC systems, enabling enhanced report generation.

Customized Five Station M500-AT Machine

Customized Five Station M500-AT Machine - Picture 1
Customized Five Station M500-AT Machine - Picture 2
Customized Five Station M500-AT Machine - Picture 3

Other Equipment by this Supplier