Avantama N-10 - Printed Electronics Electron Transport Material

The electron transport material from Avantama is designed for printed electronics. The material shows high performance irrespective of the device architecture. For a higher concentration, customers can refer the Avantama N-12 or Avantama N-13. The Avantama N-11 can be referred for a lower work function, while the Avantama N-20X for higher conductivity.

Features

  • Post-treatment is not required
  • Well-suited with perovskite absorbers
  • Compatible with silver nanowires
  • Low surface roughness
  • No damage to absorber/emitter (normal architecture)
  • Long shelf life
  • Available with higher conductivity and lower work function
. .
Product Number 6038
Composition ZnO
Particle size (nm) 12
Work function (eV) 4.3
Concentration (wt%) 2.5
Solvent 2-propanol
Viscosity (cP) 2.4
Application Methods
  • Spin coating / Doctor blading
  • Slot die
Functions
  • Electron injection
  • Electron transport
  • Hole blocking
  • Charge recombination
Markets
  • OLED
  • OPV
  • Perovskite PV
  • QLED
  • Printed photodetectors
Selected publications
  • Yakunin et al., Nature Photonics, 9, 2015
  • Guo et al., Energy Environ. Sci., 8, 1690 – 1697, 2015
  • Min et al., Adv. Energy Mater., 1400816, 2014
  • Gaertner et al., Adv. Mater., 26, 6653–6657, 2014
  • Guo et al., Nanoscale, 7, 1642–1649, 2015

Other Equipment by this Supplier