HoloPrinter® UNI A6 DT for Laboratory-Scale Printing

Stensborg has introduced a new user-friendly tabletop unit called HoloPrinter® UNI A6 DT, specifically developed for laboratory-scale NIL work.

The HoloPrinter® is normally used for imprinting functional structures such as lab-on-chip, diffractive optical elements, and other different types of nano-imprinted structures.

The unit also allows users to imprint materials, as well as carry out characterization and test of photo-curable resins. The unit is equipped with Stensborg’s advanced optical curing engine and also features a simple mounting method to imprint templates.

Apart from making their own templates from PDMS, HPDMS, and hot-embossed polymers, users can also select from the user-friendly consumables available from Stensborg.

1. Place template on drum

Hologram Printing

 

Image Credit: Stensborg

2. Place foil on plate

Hologram Printing

Image Credit: Stensborg

 

3. Processing

Hologram Printing

Image Credit: Stensborg

 

4. Remove product from plate

Hologram Printing

Image Credit: Stensborg

 

Specifications

Table Source: Stensborg

. .
Maximum imprint size 105 x 148 mm (width x length), substrate thickness is up to 8 mm
Typical replication speed 60 replications every hour, including manual procedures (speed of the plate movement is up to 8 m/minute)
Two outputs Roll-to-foil and roll-to-plate operation
Resin materials/consumables Stensborg 3D imprint Resin “X29”
Optical curing engine LongLife 395 nm LED (passive cooling), up to 100 mJ/cm2 at 6 m/minute
Size 630 x 280 x 231 mm (length x width x height)
630 x 280 x 231 mm (length x width x height) 26 kg
Imprinting force Up to approximately 1000 N

Other Equipment by this Supplier