Treated Rolled Copper is a tough pitch copper foil from JX Nippon Mining & Metals.
The characteristics of HA/HA-V2 foil are significantly enhanced when compared to usually rolled copper foil via adjustments to the grain size and crystallographic orientation.
- Remarkable enhancement in vibration resistance
- Minimal cracking due to exceptional flexibility
- Increased pliability due to vibration resistance
Surface Treatment
Several types of surface treatments are available to address customer requirements.
- Treatments are greatly analyzed corresponding with the needs for high frequency and fine patterning
- A range of rust-proofing treatments obtain excellent resistance to chemicals, heat and soldering
- Fine and low roughness treatment achieves improved adhesion property to resin
Specification and Typical Properties
Table 1. Source: JX Nippon Mining & Metals
Grade |
Type |
Features |
Purity |
Thickness (µm) |
150 |
105 |
70 |
35 |
18 |
12 |
9 |
6 |
High functionality |
HA-V2 (OFC) |
High flexibility
Low repulsive
force Ease
of handling |
Cu: At least 99.9%
Ag:100 ppm |
 |
 |
 |
 |
 |
 |
 |
 |
HA (TPC) |
High flexibility
Low modulus of elasticity |
Cu: At least 99.9%
Ag:190 ppm |
|
|
|
 |
 |
 |
|
|
The stability and flexibility of treated rolled copper foil means that it is desirable for FPC products, which need high reliability.
Physical Properties
Table 2. Source: JX Nippon Mining & Metals
Type (Treating type - Foil type) |
BHY-T |
BHYX-HA |
GHY5-HA |
GHY5-HA-V2
|
IPC Grade |
Grade 8 (LTA-W) |
Modulus of elasticity
(GPa) (resonance method) |
Before annealing |
MD |
105 |
122 |
122 |
110 |
Modulus of elasticity |
Before annealing |
TD |
120 |
140 |
140 |
140 |
Modulus of elasticity |
After annealing (180 ℃/1 h) |
MD |
105 |
76 |
76 |
85 |
Modulus of elasticity |
After annealing (180 ℃/1 h) |
TD |
100 |
76 |
76 |
85 |
Electrical conductivity (% IACS) |
100 |
100 |
100 |
101 |
Resistivity (ohm-gram/m2) |
0.154 |
0.154 |
0.154 |
0.153 |
Mechanical Properties
Table 3. Source: JX Nippon Mining & Metals
|
Type (Treating type - Foil type) |
BHY-T |
BHYX-HA |
GHY5-HA |
GHY5-HA-V2 |
|
IPC Grade |
Grade 8 (LTA-W) |
|
Hardness (Hv) |
Before annealing |
Vickers |
106 |
100 |
113 |
125 |
Hardness (Hv) |
After annealing (180 ℃/1 hr) |
Vickers |
58 |
40 |
48 |
46 |
|
Tensile strength (MPa) |
Before annealing |
MD |
440 |
500 |
500 |
500 |
Tensile strength (MPa) |
Before annealing |
TD |
420 |
510 |
510 |
505 |
Tensile strength (MPa) |
at 180 ℃ |
MD |
193 |
211 |
236 |
310 |
Tensile strength (MPa) |
at 180 ℃ |
TD |
157 |
89 |
110 |
296 |
Tensile strength (MPa) |
After annealing (180 ℃/1 h) |
MD |
210 |
145 |
145 |
150 |
Tensile strength (MPa) |
After annealing (180 ℃/1 h) |
TD |
160 |
120 |
120 |
125 |
|
Elongation (%) |
Before annealing |
MD |
1 |
2 |
2 |
2 |
Elongation (%) |
Before annealing |
TD |
1 |
3 |
3 |
2 |
Elongation (%) |
at 180 ℃ |
MD |
2 |
1 |
1 |
1 |
Elongation (%) |
at 180 ℃ |
TD |
2 |
1 |
1 |
1 |
Elongation (%) |
After annealing (180 ℃/1 h) |
MD |
10 |
8 |
8 |
8 |
Elongation (%) |
After annealing (180 ℃/1 h) |
TD |
6 |
4 |
4 |
5 |
Application Examples

Image Credit: JX Nippon Mining & Metals
Advantages for Customers
HA and HA-V2 are the ideal solutions for extreme bending when mounted in a component and provide long-term reliability.

Image Credit: JX Nippon Mining & Metals
Features of HA and HA-V2
- HA and HA-V2 possesses higher bendability compared to regular Rolled Annealed copper foil
- Ha-V2 portrays good handling behavior while maintaining high flexibility

Image Credit: JX Nippon Mining & Metals
View the full range here
After annealing(180 ℃/1 h) |