Torion Technologies Inc. introduces the CLAIRION™ line of air sampling products to enhance the capabilities of Torion’s person portable TRIDION®-9 GC-TMS. The CLAIRION product line includes a hand-held battery powered air pump, along with conventional and needle trapping devices for air sampling.
The pump has a flow rate range of 100 mL/min to 5 L/min under flow control (used with conventional traps) and 5-15 mL/min (45-50 inches of water) under pressure or speed control, used for collecting samples on the CUSTODION™-NT. It can operate for up to 27 hours at 1 L/min on a single charge; the battery will charge when the unit is plugged into 110V AC service. It comes with a cradle to allow connection of one of 2 different interfaces: CUSTODION-NT to pump interface or Conventional Trap (CT) to pump interface. The conventional traps use a CT holder that is compatible with the interface, NT handle and the FUZION-3 sample desorber. The CUSTODION-CT holders accommodate conventional traps of 0.25 inch OD, 3.5 inches long with IDs of 3-4 mm. If a customer is collecting samples on the CUSTODION-NT they will need the CUSTODION-NT interface, and if they are collecting on conventional traps, they will need also the CT to pump interface.
The CLAIRION case is a high impact steel fiber filled Lexan that is antistatic and RFI/EMI-shielded. The diaphragm air pump unit features an LCD display with 2 lines of 16 characters for easy programming and viewing of sample collection parameters. The air sampling manifold is a proprietary design and fabricated with inert materials for preservation of sample integrity.
The CLAIRION products are completely compatible with the new FUZION™ air sampling accessories. The CLAIRION and FUZION products along with the TRIDION-9 personal portable GC-MS provide complete solutions for air sampling and analysis in the field.