FRITSCH Cutting Mills are ideal for size reduction of soft to medium-hard, tough-elastic and fibrous materials. The samples are comminuted by cutting and shearing forces, and the selected sieve cassette determines the desired final fineness. Various knife geometries and replaceable blades ensure maximum flexibility and durability.
Your advantages with the FRITSCH Universal Cutting Mill PULVERISETTE 19 – completely in stainless steel:
- Ideal for soft to medium-hard, tough-elastic and fibrous materials
- Especially for the analytical sector, the food and pharmaceutical industry
- Particularly resistant to alkalis, acids and media containing chloride
- Easy operation and cleaning
- Materials comply with the FDA and EU directives for the food and pharmaceutical industry
NEW: The FRITSCH high-performance Cyclone separator – for optimal sample exhaustion!
The compact FRITSCH high-performance Cyclone separator, which is made completely out of stainless steel 304, is particularly indispensable in the analytical sector and the food and pharmaceutical industries. Due to its high surface quality, it offers enhanced resistance to corrosive media such as alkalis and acids, but particularly to media containing chlorides – and is especially easy to clean with a wide range of possible cleaning agents, without leaving any residues. The Cyclone separator can also be fully dismantled, meaning that it can be completely emptied, flooded and sterilised. Your advantage: reliable protection against cross-contamination.
FRITSCH-Plus: Unmatched ease of cleaning
Because the entire grinding chamber can be opened easily in seconds and both the rotor and the sieve cassette can be removed with simple motions. Only at FRITSCH Cutting Mills it is possible to lift open the entire top part of the housing as well as the door – in fact, the door can be completely removed. And that’s not all: The rotor of the FRITSCH Cutting Mills can be removed easily without tools and for quick cleaning in between it can be turned by hand, when the mill is open.
The result: a completely opened empty grinding chamber with minimal dead space for easy and quick cleaning offering secure protection against cross contamination!
FRITSCH offers 6 different models of Cutting Mills with comprehensive accessories, a max. feed size from 70 x 70 mm – 120 x 85 mm, a max. throughput from 50 l/h up to 85 l/h, a final fineness from 0.2 – 20 mm and rotational speeds from 300 – 3400 rpm. For each application the perfect Cutting Mill!
The special features of the FRITSCH Cutting Mills and how they work can be seen in the video:
Test the FRITSCH Cutting Mills
Send us your most difficult sample – we will carry out a complimentary sample grinding for you. Compare for yourself!
Up-dated information on the whole FRITSCH range for efficient sample preparation with videos at www.fritsch.de.