Genevac, specialists in solvent removal, have developed a suite of proprietary technological solutions to facilitate post purification sample handling, including reformatting.
For labs undertaking purification using Normal Phase HPLC, SFC or Flash chromatography – removal of organic solvents can be simply, productively and safely carried out in a Genevac centrifugal evaporator (EZ-2, ROCKET, Rocket Synergy or HT Series III). Where the nature of the sample being concentrated can lead to solvent bumping (e.g. natural products) - Genevac's DriPure® technology is proven to completely eliminate this troublesome and time-consuming problem
The evaporation of aqueous acetonitrile (or methanol / ethanol) fractions resulting from
Reverse Phase HPLC is a widely carried out application on many Genevac evaporator systems. A multiple stage method has been developed for the EZ-2 evaporator to remove the organic solvent without freezing the water, remove the water, and then dry any remaining stubborn solvent. Alternatively, the unique LyoSpeed™ fast lyophilisation method can be used in Genevac HT series evaporators to produce dry (solvent-free) powders from samples that previously could only be produced as gums and oils. Recent advances in condenser technology, in particular the high power -75°C cold trap, available on HT Series III and Rocket Synergy evaporators, has led to significant advances in lyophilisation success rates.
During post purification handling - samples typically need to be reformatted from fraction tubes or flasks, into a small vial for compound storage. For this specific time consuming task, Genevac developed SampleGenie™ technology. SampleGenie™ enables a large volume to be dried (or lyophilised) directly into a small storage vial in a fraction of the time taken by traditional evaporation methods that require you to reformat samples from a flask or multiple tubes into a vial.
For further information on these post purification technologies, including technical articles describing their use, please visit www.genevac.com/purification or contact Genevac on +44-1473-240000 / +1-845-687-5000 / [email protected]
Genevac, now part of SP Scientific, was founded in 1990. Today the company employs around 65 people, with manufacturing, R&D and marketing headquartered in Ipswich, UK. Genevac offers a comprehensive portfolio of evaporators to suit almost any solvent removal application, purchasing budget or productivity requirement.