Fast Lyophilisation of HPLC Fractions

Fast Lyophilisation on the Genevac Series 3 HT Evaporator was developed to provide a rapid, high-throughput alternative to freeze drying HPLC purification fractions.

Traditional evaporation methods of removing solvents, such as water and acetonitrile, often results in formation of a gum or oil due to solvent interactions with the dissolved sample. Employing a Series 3 HT Evaporator with LyoSpeed™ Fast Lyophilisation technology is enabling pharma labs to now routinely dry HPLC fraction samples to a powder form, such that the samples can then be accurately weighed, easily sub-sampled and redissolved.

While standard evaporation works well for most hydrophilic samples, difficulties may arise where the sample cannot dissolve in only water. In such situations, when the organic solvent is removed, the sample sometimes crashes out forming an oil which until now required further processing to achieve the desired dry powder form.  For such samples using a Series 3 HT Evaporator, with  -75°C condenser and Fast Lyophilisation method, produces powdered samples from even the most difficult to handle compounds with a success rate as high as 95%.

For further information please visit here or contact Genevac now on +44-1473-240000 / +1-845-687-5000 / [email protected]

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Genevac. (2019, February 08). Fast Lyophilisation of HPLC Fractions. AZoM. Retrieved on August 05, 2020 from https://www.azom.com/news.aspx?newsID=45141.

  • MLA

    Genevac. "Fast Lyophilisation of HPLC Fractions". AZoM. 05 August 2020. <https://www.azom.com/news.aspx?newsID=45141>.

  • Chicago

    Genevac. "Fast Lyophilisation of HPLC Fractions". AZoM. https://www.azom.com/news.aspx?newsID=45141. (accessed August 05, 2020).

  • Harvard

    Genevac. 2019. Fast Lyophilisation of HPLC Fractions. AZoM, viewed 05 August 2020, https://www.azom.com/news.aspx?newsID=45141.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit