Universal Materials Testing Machines | Compare, Review, Quotes (RFQ) from Universal Materials Testing Machines Manufacturers, Suppliers

Texture Analyser 102 kgf (1 kN, 225 lbf) from Lloyds Instruments

The system is capable of storing up to 600 test results from a choice of 10 programmable test set-ups. For enhanced performance, the TA1 can be used with Lloyd Instruments NEXYGENPlus data analysis software. The software contains an extensive library of pre-programmed texture test set-ups based on international standards. Test information can easily be exported to MicrosoftÂ® products such as Word, ExcelÂ® and OutlookÂ®.

BioCoat Liquid Resistant Cover for Medical Device Testing on 5940 Systems from Instron

Testing of medical devices and biomaterials often requires simulation of the physiological environment in which the device will be used. This is often achieved by submersing the specimen in a fluid bath, heated to 37° C during testing.

eXpert 3930 series Dynamic Testing Machine from Admet

The eXpert 3930 series table top dynamic testing machine is a compact, quiet, and clean electro-dynamic testing system which is used for determining the durability of components and materials.

Materials Testing Machine LR150KPlus 150 kN Dual Column Machine from Lloyds Instruments

The LR150KPlus advanced materials testing machine incorporates an extensive range of features making it ideal for performing complex aswell as routine testing applications up to 150 kN (33722 lbf). The LR150KPlus is a floor standing machine featuring a twin column design with a crosshead travel range of 1150 mm (45.3 in).

ADMET eXpert 2600 Series Universal Testing Machines

The ADMET eXpert 2600 series dual column testing machines tackle the toughest tests with their superior axial alignment, stiffness, and crosshead guidance. A simple design allows for lower cost, faster delivery, and years of maintenance free operation. All eXpert systems are capable of performing compression tension, and flexure tests.

CT3 Texture Analyzer From Brookfield Engineering

The CT3 is a low cost, but powerful, universal testing machine that offers both compression and tensile testing. It can calculate, through compression and tensile data, a number of physical properties that have proven to be highly correlated to human sensory evaluation of food and other consumer products. With six built-in test modes and ten memory slots for operator-protected tests with administrator rights, a wide choice of accessories and an optional software package, the CT-3 is perfect for most any physical testing requirements. The CT3 performs like a high end texture analyzer but at a fraction of the cost. Its uses can expand with your applications - or your testing imagination! The CT3's easy-to-operate design will have your R&D and QC up and running in no time.

eXpert 5900 Dynamic Testing Machine from Admet

Admet offers the eXpert 5950 series table top dynamic testing machine which suitable for use in determining the durability of components and materials.

Model H25K-S UTM Benchtop Materials Tester from Tinius Olsen - 25kN Capacity

The H25K-S UTM Benchtop Materials Tester is built using the latest advanced technology and quality engineering for achieving high usability, durability, accuracy, and convenience.

eXpert 3910 Series Dynamic Testing Machine from Admet

Admet offers fatigue testers which are compact, quiet, and clean electro-dynamic testing systems. They are designed for determining the durability of components and materials.

Model H5K-S UTM Benchtop Materials Tester from Tinius Olsen - 5kN Capacity

The 5kN single column H5kS is a powerful stand alone unit. It is designed using quality engineering and latest technology to ensure high accuracy, convenience, and durability.

Materials Testing Machine - Extended Travel 2.5 kN (572 lbf) - Model LS2.5 form Lloyd Instruments

The LS2.5 testing machine is an affordable, easy to use system. The system is particularly suited for plastic, rubber and other high elongation materials due to its wide crosshead travel capability and high speed. The machine uses high accuracy interchangeable YLC Series loadcells for tension, compression and cycling through zero force measurements.

High Force Electromechanical Tester 300kN U Series From Tinius Olsen

These Tinius Olsen dual column materials testing machines are floor mounted and have frame capacities of 100 kN, 150 kN, 200 kN, and 300 kN (20,000 lbf, 30,000 lbf, 45,000 lbf, and 60,000 lbf respectively). These machines are designed to test a vast range of materials, including, but not limited to: rigid and reinforced plastics, composites, geotextiles, sheet metal, welded specimens, adhesives, and medical products and components, in tension, compression, flexure, shear, tear, and peel.

Industrial Series HDX Models from Instron

Designed for high-capacity tension, compression, bend/flex, and shear testing, the HDX Models feature a dual test space and long test stroke.

Model H1K-T UTM Benchtop Materials Tester from Tinius Olsen - 1kN Capacity

The H1K-T UTM Benchtop Materials Tester is designed using the quality engineering and advanced technology used in the S series.

Hegewald and Peschke Universal Testing Machine - 20kN

The materials testing machines of the series Inspekt table blue have been designed for standard applications with a repeated testing task. The series of machines is especially suited for employment in quality assurance and is characterised by a very good price/performance ratio. During simple tests, an external computer is unnecessary, due to the fact that Inspekt table blue machines can work in stand-alone mode. For more challenging tasks, it is possible to connect different load cells and clip-on or long distance extensometers to the controller.

Koslow-1001 Series SCE Mercury Chloride Reference Electrode

Everyone loves Koslow’s SCE. Electrode potential is stable to plus or minus one millivolt and recovers quickly from small temperature excursions.

Koslow-Stainless Steel 304 vs. 316 ID Kit - 1542C

When you specify 316 stainless steel, and you pay for 316 stainless steel; how do you know you really have 316 stainless steel? Mixing this desirable material with common 304 can result in a variety of nasty problems. Koslow Scientific Company understands the importance to sort 316 from other stainless steels.

ADMET Micro EP Miniature Universal Testing Machine

Equipped with a power digital closed-loop controller, ADMET’s Micro EP is a mini tester that can also adapt to many microscope stages. Micro EP models are available with force capacities to 5kN (1,125 Lb), optional crosshead strokes, testing speeds, thermoelectric heaters and coolers.

EZ-X EZ Test Table-top Materials Testers from Shimadzu

Shimadzu offers EZ-X EZ Test Table-top Materials Testers which are suitable for use in a wide range of applications.

Model H10K-T UTM Benchtop Materials Tester from Tinius Olsen - 10kN Capacity

The H10K-T UTM Benchtop Materials Tester is developed using quality engineering and technology used in the S Series, thus offering high convenience, durability, and accuracy. It has same features as that of the S series.

CEAST MF20 and MF30 Melt Flow Testers from Instron

The CEAST MF20 and MF30 available from Instron are single weight systems that can perform consistent tests on commodity materials and also on special grade materials that are sensitive to moisture and temperature.

eXpert 8600 Series Axial-Torsion Test Machines from Admet

Admet offers the eXpert 8600 Series Axial-Torsion Test Machines which are provided with MTESTQuattro controller, thus ensuring that they can be used for testing several materials and devices which include implant and body fusion devices, screws in torsion, adhesives, luer taper fittings, and biomaterials.

Materials Testing Machine - Single Column Bench Mounted 5 kN (1124 lbf) - Model LS5 form Lloyd Instruments

The LS5 materials testing machine is an affordable, easy to use system, ideal for material testing applications up to 5 kN (1124 lbf). The machine uses high accuracy interchangeable YLC Series loadcells for tension, compression and cycling through zero force measurements.

ADMET eXpert Single Column Universal Testing Machines

Admet single column electromechanical testing systems are ideal for determining the mechanical properties of a variety of materials in a divers set of applications. Systems are ideal for measuring the tensile, flexural, shear, creep, and compressive properties of materials, components, and devices.

IT504 Impact Tester For Plastics From Tinius Olsen

The Tinius Olsen model IT 504 is ideal for measuring the impact strength of plastics and continues to set the industry standard for accuracy, versatility, ease of operation,and display of information with high resolution

SATEC Series KN Fixed Height Models Universal Tester from Instron

Designed for high-capacity tension, compression, bend/flex, and shear testing, the Fixed Height KN Model offers an economical solution while still providing the versatility of the KN design.

Universal Testings Machine - LS1 from Lloyd Instruments

The new LS1 is an affordable high precision universal testing machine for materials testing applications up to 1 kN / 225 lbf capacity which, when combined with our extensive range of grips, fixtures, extensometers and software to match your application, creates a powerful new generation materials testing system.

Testometric M250-3 AT Materials Testing Machine

AT small footprint single column materials testing machine with one metre stroke. Tee slotted column allows easy addition of accessories.

Koslow-1499 Stainless Steel Inspector's Kit

Is this the stainless steel that it's supposed to be? Can I conduct the same quality assurance inspections that my customers use? Can I assume foreign imports are what they claim to be? Is my stock labelled correctly? Inspect it yourself!

ADMET ExPress Servo Hydraulic Testing Machines

ADMET offers ExPress servo hydraulic testing machines which are suitable for testing concrete, metals, webbing, and other materials at low cost.

Koslow- ThermoElectric Alloy Sorter - TE-3000

Don't spend a fortune getting alloys needlessly analyzed when you only need to sort one alloy from another. Why send samples to a lab? Sort your metal mixed up yourself! TE instruments take so little time and effort that a large number of identifications can be made in a very short time. Most economical. This universal metal tester finds applications in all facets of metal inspection, quality control, scrap-sorting, maintenance and repair. TE Sorters are used for scrap metal recycling, including upgrading material to increase profits. No special training required.

SATEC Series KN Model Universal Testing Machine from Instron

Designed for high-capacity tension, compression, bend/flex, and shear testing, the superior design of the KN Model provides the ultimate in versatility.

Lloyd Instruments LR5KPlus Universal Materials Testing Machine

The LR5KPlus twin column test instrument is microprocessor controlled, incorporating world proven 32-bit technology for highly accurate load measurement and rapid data acquisition. It is ideal for testing applications in the mid force range up to 5 kN (1124 lbf) and is renowned for its ease-of-use, excellent reliability and precision of measurement.

Model H5K-T UTM Benchtop Materials Tester from Tinius Olsen - 5kN Capacity

The 5kN single column H5kT is developed by Tinius Olsen using quality engineering and technology similar to that of the Series, thus ensuring high convenience, durability, ease of use, and accuracy.

Model H10K-S UTM Benchtop Materials Tester from Tinius Olsen - 10kN Capacity

The H10K-S UTM Benchtop Materials Tester is developed by Tinius Olsen using quality engineering and latest technology for providing high accuracy, durability, usability, and convenience.

Model H25K-T UTM Benchtop Materials Tester from Tinius Olsen - 25kN Capacity

Tinius Olsen offers the 25kN dual column H25kT which is designed using quality engineering and innovative technology which is used in the S Series.

MPX Series Motorized Impact Testing System from Instron

Instron introduces the MPX Series of motorized pendulum impact testers ideal for testing metals to Charpy and Izod standards.

Dual Column Tabletop Universal Testing Systems - 3360 Series from Instron

The 3360 Series Dual Column Tabletop Testing Systems from Instron are ideal for tension and/or compression applications where tests are less than 50 kN (11,250 lbf). The 3360 Series Dual Column testing systems provide simplicity, performance, and affordability for quality control and product testing. Models are available in load force capacities of 5, 10, 30, and 50 kN.

Digital Force Tester (225 lbf / 1 kN) - TCD225 from Lloyd Instruments

The CHATILLONÂ® TCD225 Series is an advanced force testing system optimized for production, quality control and engineering applications.

Force Testing Systems - MultiTest 50-xt from Mecmesin

The MultiTest 50-xt from Mecmesin can be programmed at mid-range and is a self-contained force testing system with 50kN rating.

Model H75K-S UTM Benchtop Materials Tester from Tinius Olsen - 75kN Capacity

Tinius Olsen offers the 75kN dual column H75kS which uses quality engineering and advanced technology to provide high accuracy, durability, and convenience.

EMCO-TEST M4C G3 Universal Hardness Testing Machine

Universal hardness testing machine for Brinell, Vickers, Rockwell, Knoop and Plastic testing.

United Model SSTM Universal Testing Machine

The United Model SSTM testing machine is a computer inclusive, electromechanical, test system designed to accommodate a variety of testing instruments and accessories to test various types of material including ceramics, plastics, polymers, metals and composites.

5 kN Single Column Model 3345 with Long-Travel Extensometer and Pneumatic Grips for Testing Elastomers from Instron

The 3340 Series Single Column Systems are ideal for tension and/or compression applications where tests are less than 5 kN (1,100 lbf), lab space is limited, and where free access to the test area is desirable. The 3340 Series Single Column Testing Systems provide simplicity, performance, and affordability for quality control and product testing.

MultiTest-xt Console Controlled Test Frame/Universal Testing Machine from Mecmesin

The MultiTest-xt is suited to most routine production and Quality Control testing. If your needs change, it can be upgraded to use test programs written with Mecmesin’s powerful Emperor™ Software with a large selection of analysis options.

Model H50K-T UTM Benchtop Materials Tester from Tinius Olsen - 50kN Capacity

Tinius Olsen offers the H50K-T UTM benchtop materials tester which is designed using the quality engineering and advanced technology used in the S Series, thus ensuring high durability and accuracy, and enabling the model to use easily and conveniently.

MTI Universal Testing Machine

Force and displacement and strain measurements are automatic. MTI AD-24 automatic 24-bit Force and Strain Signal Processors are supplied with each system. The two AD-24's provide data accuracy and measurement resolution approaching one part in one hundred thousand in a fully automatic mode of operation. The load frame crosshead displacement measurement is also automatic, with resolution of 0.25 microns (0.00001 inches) inch for all tests.

900 Series Universal Testing Machines from Applied Test Systems

Applied Test Systems electromechanical Universal Testing Machines are capable of performing virtually any test on almost any material when coupled with our unmatched line of standard and custom testing accessories. As with all ATS equipment, any of our standard frame designs can be custom-modified by our experienced Engineering department to suit nearly any application or space restriction.

Universal Testing Machines Compuline FMC from Physical Test Solutions

The Compuline FMC series is a medium capacity floor model computer controlled universal testing machine that affords added test space and versatility in material testing applications.

Uniaxial and Compression Testing of Composite Laminates from Instron

Uniaxial tests on composite laminates require the highest level of precision and stiffness - so that alignment can be established and maintained.Without a precision testing system (load frame), results can be compromised because composite materials are so sensitive to alignment.

Bluehill 3 Testing Software for Mechanical Testing Systems from Instron

Bluehill 3is the newest version of our widely popular Bluehill Software and is compatible with all Instron® 3300, 5500, and 5900 Series Testing Systems. Bluehill 3 contains enhancements and features that are designed specifically with the end-user in mind.

Force Testing Systems - MultiTest 25-i from Mecmesin

The MultiTest 25-i offers an all-inclusive and powerful twin-column tensile test system for increased capacity force measurements up to 25kN.

Model H1K-S UTM Benchtop Materials Tester from Tinius Olsen - 1kN Capacity

The H1K-S UTM Benchtop Materials Tester is developed by Tinius Olsen using quality engineering and latest technology for achieving high durability, accuracy, and convenience.

ADMET BioTense Bioreactor

The BioTense Perfusion Bioreactor is designed for performing high resolution investigation in mechanobiology by cell biologists and tissue engineers.

High Force Electromechanical Tester 60kN From Tinius Olsen

The 60kN (12,000 lbf) LoCap mechanical testing machine provides durability, speed, convenience, accuracy and ease of use. Its precision interchangeable straingage loadcells allows quick change of machine capability from as little as 0.02 lbf up to 12,000 lbf.

Hydraulic Tester 2,000kN Capacity From Tinius Olsen

The Tinius Olsen 2,000kN (400,000 lbf) Super L model features the patented dual pressure hydraulic loading system and a rugged four column construction for exceptional load frame rigidity. The machine has an operating range from 800 lbf to 400,000 lbf and maintains an accuracy of +/- 0.5% of the displayed load across this range.

5960 Dual Column Tabletop Universal Testing Systems from Instron

5960 Dual Column Tabletop Testing Systems are engineered for precision, built for durability, and offer the flexibility for changing requirements. They are designed with standard and optional features that increase testing efficiency and improve the testing experience for the operator.

Koslow-Passi-Flash 3036 Stainless Steel Passivation Test Kit

A significant advance in Passivation Testing. Passive stainless steel is non-reactive with its environment. It is non-corroding. The passivation bath, usually nitric or citric acid, cleans off surface free iron which causes rust spots and also conditions the surface for the spontaneous formation of protective surface oxides. In effect, an equi-potential surface is formed by passivation. The surface free iron can come from various metal working and polishing steps. To eliminate these rust spots on stainless steel, testing for complete passivation is essential, and in most cases, an integral part of industrial and government contracts.

Universal Hardness Testing Machine - ZHU topLine from Zwick

Zwick’s state-of-the-art universal hardness testing machines use innovative electromechanical technology for high precision testing in a wide range of applications, particularly for quality assurance, production-line testing and in the laboratory.

The LR30KPlus Twin Column Universal Materials Testing Machine from Lloyd Instruments

The LR30KPlus twin column universal materials testing machine from Lloyd Instruments offers simple operation, high accuracy measurement and flexible control. Our extensive range of grips and fixtures support virtually any type of test. Designed for testing applications up to 30 kN (6744 lbf), the LR30KPlus is equally well suited to routine quality control testing and for performing complex multi-stage tests. Its load measuring system exceeds the requirements of all recognised international standards.

5980 Floor Model Universal Testing Systems for High-Capacity Testing up to 600 kN from Instron

5980 Floor Model Testing Systems are engineered for precision, built for durability, and offer the flexibility for changing requirements. They are designed with standard and optional features that increase testing efficiency and improve the testing experience for the operator.

Model H50K-S UTM Benchtop Materials Tester from Tinius Olsen - 50kN Capacity

Tinius Olsen offers the 50kN dual column H50kS which is developed using quality engineering and advanced technology in order to enhance accuracy, convenience, usability, and durability. It is a powerful stand alone unit.