Industrial Furnaces and Ovens RSS Feed - Industrial Furnaces and Ovens

Industrial furnaces and ovens take many shapes, sizes and forms and may work in continuous or intermittent modes. They may may be front opening, top loading, horizontal, vertical, elevator hearth or take any number of other configurations. Also, depending on their application and the type of material that they are treating, may operate using different atmospheres from air to nitrogen to vacuum which will be dictated by the desired outcome. Also depending on the temperature required and operating atmosphere, the heat source may from gas burners to electric elements to induction heating, or even other more exotic methods such as microwave heating. Industrial ovens generally operate at lower temperatures to furnaces. Their applications may vary from metal heat treatment, to coatings and surface treatment, through to sintering of ceramics and even curing or rubbers.
If you'd like us to help you source a Quotation for Industrial Furnaces and Ovens please click here. Once submitted, we will try and place you in contact with a suitable Industrial Furnaces and Ovens supplier within 48 hours.
Equipment
Among Inductotherm’s newest technologies is the Acutrak® Direct Electric Heat (DEH) Crucible Furnace. This unique aluminum melting and holding furnace uses an air-cooled, direct electric heating system that is more efficient, environmentally friendly, assures more accurate temperature control of molten metal, all while eliminating water cooling.
Controlled atmosphere furnace models include vertical tube units, horizontal tube units, multi-zone tube units, convertible "VT/BL" furnaces which can be used as tube units or bottom loaders and convertible "VT/HT" furnaces which can be used as vertical or horizontal tube units.
The Binder incubator BF115 with mechanical convection is suited for all gentle incubation applications, especially under full load and large batch throughputs. This incubator is has extremely low temperature variation and has rapid recovery times.
Thermcraft offers box furnaces are designed for temperatures up to 1200°C (2192°F). These box furnaces generate even heat throughout the entire heated chamber and are insulated for optimum thermal efficiency.
Harper International designs its rotary furnaces to suit customer’s unique specifications.
Harper’s patented Vertical Conveyor furnace, Vertical calciner is the company’s most recent thermal processing innovation for a broad range of product feedstocks especially for materials that need high temperature solid-solid and solid-gas reactions, such as carbides, nitrides, borides and refractory metal powders.
Marshall tube furnaces available from Thermcraft are a reliable range of furnaces specifically designed to meet customers’ needs.
BINDER FD series ovens are ideal for use in cases where sterilization and quick drying are required. The FD 53 oven saves valuable time thanks to its fully homogeneous temperature distribution, quick dynamics and powerful fan.
Themcraft, in collaboration with B.W.C. Technologies and RichardsApex, has developed a highly controllable technique to simultaneously process steel tire wire and other steel long products.
The novel CB series offers optimal growth conditions for cell cultures. The anti plenum concept, the 180°C sterilization routine with the world's first sterilizable CO2 sensor and other unique BINDER technologies satisfy the highest requirements for best possible cell growth and maximum sample safety in the premium class of BINDER CO2 incubators.
Models include bottom loading, front loading, bottom loading vertical tube units for convenient loading of small crucibles combined with corrosion resistance and atmosphere control. The temperature range is 1600, 1700, 1800° C (2900, 3100, 3300° F).
Contemporary Kiln automatic cooling ovens have integrated ventilation systems that introduce fresh filtered air into the kiln chamber in order to expedite the cooling process and reduce the process cycle time.
Top hot furnace models include fixed loading platforms or kiln cars, multi-car systems with programmable linear actuation to allow automatic positioning and removal of kiln cars from the furnace.
Split shell, vertical tube, or custom designs on stand or with custom mounting hardware for your test device, including creep rigs. The operating temperatures up to 1800°C
Thermcraft offers high temperature semi-cylindrical ceramic electric heaters that have maximum operating temperatures of 1010°C (1850°F) and 1200°C (2200°F).
Thermcraft supplies vertical and horizontal Bridgman crystal growing furnace systems. The vertical furnace system is fully self-contained in a compact arrangement.
Thermcraft offers a low mass diffusion heating element called Fibercraft FC-200L.
Thermcraft offers Fibercraft and Duracraft vertical diffusion heating elements that are available either as completely new units or can be redesigned to suit customers’ existing unit.
Ipsen offers rotary hearth furnaces, which are specifically designed for reheating pre-treated work components and for carburizing shallow case depths.
Delteh furnace control systems are custom-designed with application-specific features. Every Deltech control system is ETL Certified by Intertek to conform to UL508A standards. Standard safety features include an emergency stop, door interlock, safety relay, and isolation switches.
Deltech rotary kiln furnaces are available for single and multiple tube systems. The furnace temperatures are up to 1700°C The furnace has fully integrated control panels.
The front loading furnace features manual or power operated, "swing" or guillotine type doors. One can specify the type or make recommendations based on operator safety and engineering efficiency.
Temperature range is 1600, 1700, 1800° C (2900, 3100, 3300° F). The models include "BL" Bottom Load Furnaces with octagonal workspaces and "SBL" square bottom loading models with rectangular workspaces.
Thermcraft offers control systems for all types of oven, furnace, and atmosphere control applications.
Deltech has launched new horizontal tube furnaces in benchtop configuration. These units are compact, lightweight and require a small footprint.
Thermcraft offers eXPRESS-LINE control systems that are available with optional timers, programmable controllers, and high limit switches.
Harper is the choice company in continuous furnace technologies for the carbon fiber industry.
Thermcraft’s eXPRESS-LINE solid tube furnaces are designed for temperatures up to 1200°C (2192°F).
Thermcraft offers CoilCraft heating elements that can be utilized as retrofits to existing fiber- and ceramic-based heaters, or can also be installed as part of a new furnace.
Harper is the global leader for ultra-high temperature (UHT) continuous furnace systems rated to 3000°C to be used in the production of many powdered metals and high modulus carbon fiber, primarily used in applications requiring high rigidity.
Harper offers advanced Oxidation Oven technology in order to complement its industry-leading furnaces for carbon fiber processing.
The pusher plate and tunnel kilns from Harper are developed for processes needing accurate control of atmosphere and temperature and suitable for those with longer residence times that need precise control of the heat up rate of the product (temperature profile) and lower gas/solid reaction.
Pusher furnaces available from Ipsen are specifically designed for uninterrupted treatment of components under a protective gas atmosphere.
Harper’s belt and conveyor furnaces are developed for the continuous processing of parts as well as advanced materials such as powder, granular, or particulate aggregates in high purity and specialty atmosphere environments at temperatures up to 2000°C.
This versatile series of multi-purpose vacuum furnaces offers a wide variety of sizes and configurations, including horizontal or vertical designs. As users have a choice of hot zones, pumping systems and gas cooling options, the MetalMaster™ is ideal for almost any heat treating, brazing or other thermal processing application. The gas quench system features a specially engineered heat exchanger and turbine blower designed to optimize gas flow for more efficient cooling. In addition to Ipsen's standard computer control systems, MetalMaster™ furnaces may be ordered with other high-productivity options, including specialized instrumentation, increased pumping capability, and material handling systems.
Vestibule blocks and insulation tubes available from Thermcraft are designed to fit all types of diffusion furnaces and specialty insulation applications.
HybridCarb, the innovative process gas-recycling technology from Ipsen, helps in saving energy and resources by reducing energy usage and carbon footprint.
Thermcraft offers cast plate heaters (PH-C) without side flanges. These heaters have a maximum operating temperature of 1204°C (2200°F) and are available in almost any size.
Thermcraft offers the BHAF series general purpose box furnaces that are designed for temperatures from 2000°F to 2200°F.
The 2000° Furnace from Deltech operates in air, distinguishing it from those that need vacuum operation. The company’s high quality, efficient design is also very economical when compared to vacuum furnaces.
Standard and custom designed ovens are available from Thermcraft in either batch or continuous types. Sizes range from bench top to industrial truck ovens in single or double door styles. Ovens may be either electric or gas fired.
In addition to standard designs, Thermcraft also manufacture furnaces custom built to exact specifications. Their team of highly knoweledgeable Sales Engineers will work with you through the entire process of configuring your custom furnace.