Sponsored by ServomexReviewed by Olivia FrostNov 19 2026
Ammonia (NH3) is an undesirable byproduct of the semiconductor manufacturing process and must be abated to protect health, safety, and the environment.
Environmental monitoring and testing at a major semiconductor facility in Europe detected ammonia in the ammonia abatement system outlets. This caused ammonia emissions into the atmosphere, potentially posing risks to human health and the environment.

Image Credit: SergeiShimanovich/Shutterstock.com
The Servomex Solution
The SERVOTOUGH Laser 3 Plus Environmental Ammonia is commonly utilized in DeNOx and emission measurement applications. However, for this application, it was optimized to detect extremely low ammonia concentrations, down to 0.2 ppm, across extremely short optical path lengths. This represents a relatively novel application for laser-based measurement solutions, requiring high measurement stability and sensitivity.
The Results
During the initial trial period, Servomex showed that the Laser 3 Plus Environmental delivered greater stability and reliability than competing products installed side by side for comparison. This ultimately resulted in the semiconductor facility installing 17 cross-stack analyzers, eliminating the need for intricate heated measurements, sample systems, and transport tubing.
Over a prolonged period, the Laser 3 Plus installations were compared to an extractive standard method, in which samples were collected over a fixed period and analyzed at an independent lab. The Laser 3 Plus demonstrated good agreement with the standard method, resulting in an EPA QAL 2 equivalence approval for the installation.

Image Credit: Servomex
The cross-stack NH3 emission laser measurement is further expected to become standard, not only across other facilities operated by the same producer, but also throughout the international semiconductor sector.
The Laser 3 Plus Environmental
This miniaturized TDL analyzer provides a variety of advantages, including:
- Outstanding performance
- Dependable measurements through line-lock cuvette technology
- Straightforward installation and an intuitive user interface
- Hazardous area approvals, including ATEX, IECEx, North American hazardous area approvals, and IP66.
- Reduced ownership costs through non-depleting TDL technology and lower maintenance expenses

This information has been sourced, reviewed, and adapted from materials provided by Servomex.
For more information on this source, please visit Servomex.