Materials Videos

Wide band gap power semiconductor device fabrication

Increasing adoption of renewable energy sources & ever nearer prospect of electric vehicles drives demand for power semiconductor components.

View Video

FERGIE - Fluorescence Measurement Set-Up

Quickly set up a fluorescence measurement using the FERGIE spectroscopy system.

View Video

Intellical Spectroscopy Calibration Made Easy from Princeton Instruments

Princeton Instruments patented IntelliCal® is the industry’s only easy-to-use wavelength and intensity calibration system.

View Video

Introduction to Biomaster Antimicrobial Additives

View Video

LAQUATwin B-712 Pocket pH Meter from HORIBA

This video shows the LAQUAtwin B-712 Pocket pH meter from HORIBA. It is a waterproof pH meter with a large LCD display.

View Video

Handheld LIBS Analyser for QA / QC Analysis

Vulcan is one of the fastest metals analysers that is built to last

View Video

FERGIE Raman in less than 90 seconds

Watch how simply and quickly you can set up a Raman experiment with FERGIE and its CUBES and accessories.

View Video

Aerospace Capabilities of Stress Engineering Services

Stress Engineering Services provides clients in high-tech industries like Aerospace with the expert services they need to ensure excellence in areas such as Design, Analysis, Testing, Materials and Avionics

View Video

Mid-Mountain Materials Products Prove Crucial to Gulf Oil Spill Clean Up

Fireboom products from Mid-Mountain Materials were used to help clean up the Gulf oil spill in the US. Once controlled burning wbecame an approved option, Mid-Mountain Materials supplied vast quantities of this refractory material so that the rogue oil could be rounded up and burned off, protecting nearby beaches and wildlife.

View Video

Video to Show How NeoSight Can Be Used on Coke Drums

With NeoSight, we apply our knowledge and expertise to the challenge of leveraging your data to maximize asset efficiency.

View Video

Video to Show Bruker’s scimaX

scimaX allows you to dramatically improve your productivity by operating round-the-clock by doing your ESI experiments during the day and acquiring MALDI imaging data when you go home.

View Video

Pneumatic Side Action Grips - Flow Control

Instron’s pneumatic side-action grips feature an adjustable flow-control valve that can be used to slow down the closing speed and help prevent accidents.

View Video

Video to Show Food Inspection with X-Ray Detection - X5

Loma's X5 X-ray inspection systems for scanning of food products within production lines help manufacturers ensure safety and quality.

View Video

Handheld XRF analyser X-MET8000 for quality control and assurance

View Video

Video to Demonstrate an Electromagnetic Linear Motor

TA ElectroForce manufactures dynamic mechanical testing systems, used to characterize Medical Devices, Biologic, and Engineered materials.

View Video

GALAXY System - High Quality Grinding & Polishing Consumables

Run Time - 2:52

View Video

Fundamentals of Spectroscopy and Imaging Spectrometers

Presented by Sebastian Remi - Applications Scientist - Princeton Instruments.

View Video

NT-MDT's SOLVER Nano AFM Platform

Stanislav Leesment from NT-MDT shows us their new SOLVER Nano AFM (atomic force microscope) that was launched t his years MRS Fall Meeting on Boston. Despite its diminutive size it includes all the functions of much larger AFMs.

View Video

"What is Graphene? An animated video to explain why graphene matters." - Bluestone Global Tech

View Video

Prompted Test Using the BlueHill Universal

Video to show a prompted test using the BlueHill Universal from Instron.

View Video

Video of the GOM CT Scanner

This video shows the capabilities of the GOM CT Scanner.

View Video

Reflected Light Image Registration from HORIBA Scientific

This video from HORIBA Scientific shows the Raman image and the corresponding reflected light image of Si test structure.

View Video

The Most Powerful Dynamic Mechanical Analysis - Discovery DMA 850

TA Instruments invites you to experience the ultimate in Dynamic Mechanical Analyzers, the Discovery DMA 850.

View Video

The AFM+ from Anasys Instruments

Roshan Shetty from Anasys Instruments shows us their new AFM+ platform. This new development has been designed as a modular entry level instrument that combines an atomic force microscope and thermal analysis capabilities. It has been designed so that it can be upgraded to their NanoIR spec at a later date.

View Video

ELTRA Carbon and Sulfur Analyzer CS-2000 - Introduction

ELTRA's CS-2000 is the only analyzer on the market for the determination of carbon and sulfur in organic as well as inorganic samples. For this purpose, the CS-2000 is equipped with both an induction and a resistance furnace (ELTRA Dual Furnace Technology), covering the full range of carbon and sulfur analysis.

View Video

Particle Interactions

View Video

Mixer Mill MM 400 - Introductory Video

The mixer mill MM 400 is a compact versatile bench-top unit for dry, wet and cryogenic grinding of small amounts of sample.

View Video

Particle Analysis of Spray Dried Powders - CAMSIZER X2

Particle size analysis of spray dried powders in the RETSCH TECHNOLOGY CAMSIZER X2.

View Video

A Video Introduction to X-Ray Fluorescence (XRF)

This video from Hitachi High-Tech Analytical Science explains Optical Emission Spectroscopy.

View Video

Photometric Stereo Applications of Multi-Lighting for Machine Vision - Video

This video shows the photometric stereo applications of Smart Vision Lights' LED Light Manager (LLM).

View Video

Trace 1300 Series Gas Chromatographs from Thermo Scientific

Thermo Scientific have introduced the Trace 1300 Series gas chromatographs that incorporate breakthrough technology. Fausto Pigozzo shows us the new features including new injectors and detectors which help increase productivity and sensitivity with fast data acquisition in a more compact instrument.

View Video

Pneumatic Side Action Grips - 2712-04x

Instron’s pneumatic side action grips have several key features to help you improve your lab’s productivity, repeatability, ease-of-use, and operator safety.

View Video

TRITOP Photogrammetry & ATOS Triple Scan 3D Scanner - Video Timelapse

This video shows a timelapse of TRITOP Photogrammetry & ATOS Triple Scan 3D Scanner.

View Video

Size and Shape Particle Analyzer - Video of Microtrac's Sync

Microtrac’s synchronous size and shape analyzer, Sync, integrates the world’s leading laser diffraction technology with the world’s leading dynamic image analysis technology.

View Video

Microreactor with Integrated Mass Spectrometer for Catalysis Studies | The CATLAB | Hiden Analytical

The Hiden CATLAB is a catalyst characterisation and microreactor system designed to make the analysis of catalysts rapid and simple.

View Video

Particle Characterization by Static and Dynamic Image Analysis by HORIBA

Mark Bumiller from HORIBA Particle Products introduces us to some particle characterization by static and dynamic image analysis and the HORIBA PSA300 and Camsizer. These instruments calculate particle size and shape distributions.

View Video

Grinding & Polishing Robot SAPHIR X-Change - ATM

Fully integrated into the System Lab 2.0, the compact grinding and polishing automat SAPHIR X-Change binds together several meters of standard equipment for grinding and polishing in one unit, e. g. changer with stack for 16 grinding and polishing media, integrated dosing unit and settling tank.

View Video

Oxford Instruments Plasma Technology Customer Support

Oxford Instruments Plasma Technology is committed to providing comprehensive, flexible and reliable global customer support.

View Video

Aqualog System from HORIBA

This video from HORIBA shows the Aqualog system from HORIBA that is specifically designed to provide concurrent absorbance and fluorescence excitation and emission matrices (EEMS).

View Video

Walnut Shell Grit for Non-Skid Coatings from Composition Materials

This video shows how to apply walnut shell grit for non-skid coatings from Composition Materials.

View Video

Precision in LED Lighting and Why There is a Growing Demand - Video

This video details why their is a growing need for precision in LED lighting.

View Video

Guide to Using Epoxy Film Adhesives

Learn how to properly apply adhesive film system FLM36 in this video presentation.

View Video

PTS TQM - A Customer Story from Hitachi High-Tech Analytical Science

This video details a customer story of PTS TQM with Hitachi High-Tech Analytical Science.

View Video

Video of Dover Motion's Automated Fluorescence Filter Wheel

Originally developed for a Gene Sequencing Motion Core, Dover Motion's rotary filter wheel can be used for many different applications for Automated Fluorescence Microscopy.

View Video

Latest Spectroscopy Products from HORIBA Scientific

This video shows the interview with Daniel Meyer, Sales Manager at HORIBA Scientific.

View Video

A Complete Range of Metals Analysers for QA/QC from Hitachi High-Tech Analytical Science

Read the metal. Reveal the quality. When it comes to quality assurance and control, we’ve got you covered with our analysers. Watch this video to see Hitachi High-Tech Analytical Science's products in action.

View Video

A Guide to MIDEL

This video shows MIDEL and what their company can do.

View Video

Video to Show the Wilson® UH4000 Universal Hardness Tester

The UH4000 series universal hardness tester is designed for high volume production labs and production floor.

View Video

Malvern Instruments: The New Zetasizer Nano ZSP

The Zetasizer Nano ZSP is the premium system in the Zetasizer range. It is used for the measurement of size, electrophoretic mobility of proteins, zeta potential of nanoparticles and surfaces, and optionally the microrheology of protein and polymer solutions. The exceptional performance also enables the measurement of the molecular weight and second virial coefficient, A2, of macromolecules and kD, the DLS interaction parameter.

View Video

Multi-Specimen Fatigue ElectroForce 3300 - Video Demonstration

Now available from TA Instruments is the best in multi-specimen fatigue testing in stent materials and more is the ElectroForce Series Multi-Specimen Fatigue system for the 3300 and 3200 load test frame systems.

View Video

Flow Sensors from IST AG

Introduction to Innovative Sensor Technology IST AG Flow Sensors.

View Video

Video to Show the Industrial and EV Composite Solutions

This video demonstrates the industrial and EV composite solutions provided by TRB Lightweight Structures.

View Video

FERGIE Spectrograph- Fiber Coupling

Demonstrates several ways to connect optical fibers and fiber connector probes to the FERGIE spectrograph.

View Video

Air Jet Sieve AS 200 Jet

The Air Jet Sieving Machine AS 200 jet is particularly suitable for sieve cuts of powdered materials which require efficient dispersion and desagglomeration.

View Video

Cutting Mill SM 300 - Features & Applications

The RETSCH Cutting Mill SM 300 is suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products.

View Video

Using a Spark Spectrometer to Analyze Nitrogen at Low Detection Limits

Köster und Co. GmbH invested in a spark spectrometer from Hitachi to cross-check products and ensure quality. It is important for them to analyze stainless steel grades, especially the nitrogen content at low detection limits. See why they have chosen Hitachi High-Tech's FM EXPERT and how they use it.

View Video

Introductory Video Vibratory Sieve Shaker AS 200 control

The analytical sieve shaker AS 200 is used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring.

View Video

Video to Show Composite Rail Solutions Provided by TRB Lightweight Structures

This video shows the composite rail solutions TRB Lightweight Structures has to offer.

View Video

Auto Repair Imported Geometry

Moldex3D Studio adds new capabilities to assist in further streamlining the simulation process, from automatically repairing imported geometry and probing analysis results at specific locations, to generating a completely customized report template and comparing run-to-run results

View Video

AXIS Supra (XPS) surface analysis

View Video

LightField and PI-MAX4 ICCD Cameras

LightField and PI-MAX4 ICCD Cameras from Princeton Instruments

View Video

MEMS Applications & Systems

MEMS Applications and Systems: Enabling the next generation of industrial and consumer products Combining silicon-based microelectronics with micromachining technology, MEMS techniques and microsystem-based devices can potentially affect our lives and the way we live in a most positive way.

View Video

Pre-Configured Method Templates for the BlueHill Universal

This video shows the pre-configured method templates for the BlueHill Universal from Instron.

View Video

CARBOLITE GERO EBO Chamber Furnace for Catalytic Debinding

The CARBOLITE GERO EBO debinding furnace is specially engineered to handle the stringent requirements that come with catalytic debinding.

View Video

OES Analyser - PMI-MASTER Smart

This video shows the OES Analyser - PMI-MASTER Smart.

View Video

Vibratory Disc Mill RS 200 - Introductory Video

The Vibratory Disc Mill RS 200 is suitable for the extremely quick, loss-free and reproducible grinding of medium-hard, brittle and fibrous materials to analytical fineness.

View Video

X-MET8000 XRF Analyser - For Planning, Grade Control and Mining Exploration

To find out more about X-MET8000 visit https://hha.hitachi-hightech.com/en/product-range/products/handheld-xrf-libs-analysers/handheld-xrf-analysers

View Video

Rotating Tube Furnace RHZS - CARBOLITE GERO

The new rotating tube furnace RHZS allows for the work tube to be easily removed and replaced.

View Video

Variable Speed AC Motor Drive Development and Implementation with the Yokogawa DL850 ScopeCorder

View Video

5-axis Cutting Robot Brillant 3D for Materialographic Sample Preparation

The new Brillant 3D 5-axis cutting robot for materialographic sample preparation is equipped with 5 axes (X-, Y-, Z-, D-, E-axis).

View Video

Pellet Press PP 35 - Handling video

The Pellet Press PP 35 produces solid, high-quality pellets with a smooth surface, an important precondition for reliable and meaningful XRF analysis.

View Video

A Video to Show the Next Level Optical Emission Spectrometer - FM EXPERT

The FM EXPERT is the next level optical emission spectrometer, combining superior analytical performance with a compact size, and low level nitrogen analysis.

View Video

Expert Geo Geochemistry Handheld XRF Analyser - X-MET8000

X-MET8000 Expert Geo geochemistry handheld XRF analyser for rapid, on-site environmental soil and sediment testing.

View Video

MiniRam III Portable Raman Spectrometer from B&W Tek

The MiniRam III from B&W Tek is a compact, portable Raman spectrometer with in-built power supply, computing power and touch screen interface. Robert Chimenti points out the main features and runs a demonstration, which shows how fast the instrument is to use.

View Video

ELTRA ONHp Elemental Analyzer

The elemental analyzer ELTRA ELEMENTRAC ONH-p determines oxygen, nitrogen and hydrogen in inorganic samples by inert gas fusion in an impulse furnace with temperatures in excess of 3.000 °C.

View Video

Video to Show Printed Circuit Board Sample Preparation Accessories

Manufacture of high quality printed circuit boards requires validation of every batch produced.

View Video

AUTOSAMPLER for CAMSIZER P4 - RETSCH TECHNOLOGY - Short Introduction

Whenever varying sample materials are to be analyzed or repeat measurements need to be carried out, the AutoSampler adapts perfectly to the defined measuring routine.

View Video

A Video Introduction to Optical Emission Spectroscopy (OES)

This video from Hitachi High-Tech Analytical Science explains X-ray Fluorescence (XRF).

View Video

Temperature Sensors and Fast Response Time from IST AG

Introduction to Innovative Sensor Technology IST AG Temperature Sensores - Fast Response Time.

View Video

Video to Show the Universal Software for Next Generation Static Materials Testing - Bluehill®

Discover simpler and smarter testing with features such as pre-loaded test methods, QuickTest in seconds, enhanced data exporting, and Instron Connect—a new feature that provides a direct communication link to Service.

View Video

Temperature Sensors with Directly Welded Wires from IST AG

Introduction to Innovative Sensor Technology IST AG Directly Welded Wires.

View Video

Galaxy Grinding Discs for Materialographic Sample Preparation

The ATM Galaxy system consists of different grinding discs for materialographic sample preparation. All steps are “in tune” with each other.

View Video

Explore SmartSwap™ for the Discovery Hybrid Rheometer

Get more information on this exciting feature at www.tainstruments.com TA Instruments proudly introduces you to SmartSwap™, an exciting feature on every Discovery Hybrid Rheometer! This excellent intelligent technology instantly recognizes geometries and sets parameters in your Trios Software. SmartSwap™ allows a quick and easy transition between any of our SmartSwap™ environmental systems and geometries that takes only seconds! SmartSwap™ is just one of many features that makes Discovery Hybrid Rheometers versatile and user-friendly. What else will you do with your rheometer today?

View Video

Adding Fluorescence to a Conventional Stereo Microscope

The NIGHTSEA Model SFA Stereo Microscope Fluorescence Adapter is an easy, economical way to add fluorescence viewing capability to virtually any stereo microscope, regardless of make, model, or age.

View Video

Märzhäuser Wetzlar - EMC 2012

Märzhäuser Wetzlar - EMC 2012 - Run Time - 2:58mins

View Video

Zetium from PANalytical - Excellence in Elemental Analysis

Building on years of experience and success with PANalytical's extensive analytical X-ray portfolio, Zetium represents a revolutionary step in materials analysis.

View Video

Retrofilling - The Benefits

This video shows the benefits of retrofilling with MIDEL Safety Inside.

View Video

AZo.TV Interviews Dr Jan Stefan Roell and Bill Becker from Zwick-Roell at testXpo 2012 in Ulm Germany

AZo.TV Interviews Dr. Jan Stefan Roell and Bill Becker from Zwick-Roell at the 21st Annual TextXpo 2012, in Ulm, Germany

View Video

Technology in Action - Dr Philip Withers and His Xradia (Now Zeiss) VersaXRM - EPSRC

Dr Philip Withers Discusses the work conducted using his Xradia (Now Zeiss) VersaXRM at the University of Manchester.

View Video

Video of a Miniature Linear Stage - The Dover KV™

The Dover KV™ linear slide is a miniature linear stage with anti-backlash lead screws, 10 mm to 200 mm travel, and a standard NEMA 17-frame stepper motor.

View Video

Paul Meijering Stainless Steel - A Customer Story from Hitachi High-Tech Analytical Science

This video details the customer story of Paul Meijering Stainless Steel with Hitachi High-Tech Analytical Science.

View Video

Video to Show the LaserComp FOX Series Heat Flow Meters

The FOX series provides the end user with unique features and the widest range of possible configurations to meet every measurement need.

View Video

Video Demonstration of a Versatile and Dynamic Test System - TA-ElectroForce 3200

Powered with TA-ElectroForce technology, the 3200 Test System is supported by industry leading performance, up to 300 Hz of frequency and the industry's only 10 Year Motor Warranty.

View Video

Did you know? -- Oxford Instruments Plasma Technology

Did you know we could etch the entire London transport network onto a human hair? Or that our plasmas are hotter than the surface of the sun?

View Video

Filter Change of the AD Access - Video

This video shows a filter change of the AD Access.

View Video

OPAL X-Press - Hot Mounting Press

The ATM Hot Mounting Press OPAL X-Press is a modular hot mounting press for fast and simultaneous, independent mounting of different materialographic specimens.

View Video

Lenterra Drag Force Flow (DFF) Sensor

View Video

Leica Microsystems Ergonomy

In this video Wayne Buttermore, Central Regions Sales Manager at Leica Systems talks about the ergonomy of Leica cameras.

View Video

CARBOLITE GERO CRI Coke Reactivity Furnace and CSR

The Carbolite Gero Coke Reactivity Index furnace (CRI) determines lump-coke reactivity in carbon dioxide gas at elevated temperatures.

View Video

Synthetic Ester 7131 - MIDEL

This video shows MIDEL's synthetic ester 7131.

View Video

Atomic Scale Processing Solutions

Atomic Scale Processing Solutions from Oxford Instruments Plasma Technology. Clustering multiple processing modules into one system enables unique solutions on a single vacuum transfer.

View Video

The Malvern Mastersizer 3000 Particle Size Analyzer

The Mastersizer 3000 from Malvern Panalytical replaces the Mastersizer 2000 particle size analyzer. Julie Chen gives us a run down on the new features and operation of the Mastersizer 3000.

View Video

PicoSpin 45 NMR Spectrometer from Thermo Scientific at Pittcon 2013

In this video Simon Nunn, Global Marketing Director for Molecular Spectroscopy introduces Thermo Scientific PicoSpin 45 at Pittcon 2013.

View Video

Heating Brass Inserts for Metal-to-Plastic Insertion with Induction

In this video, two brass inserts are heated to temperature with an Ambrell EASYHEAT 2 kW induction heating system.

View Video

Video to Show How Ingeo is Made

NatureWorks has become a world-leading biopolymers supplier and innovator with our portfolio of naturally advanced materials called Ingeo.

View Video

Laser Welding with 500 Watts - Video

This video shows laser welding with 500 watts

View Video

Conductivity Sensors from IST AG

Introduction to Innovative Sensor Technology IST AG Conductivity Sensors.

View Video

Video to Show The Applications of Bar Lights

This video details the capabilities of the direct connect linear light (bar light) from Smart Vision Lights.

View Video

Setting Up a Metal Detection Device - Video

This video shows the ease of setting up the IQ4 metal detection device from LOMA Systems.

View Video

Video Introduction to the Metal Detector IQ4

Introduction of the IQ4 metal detection range from Loma Systems.

View Video

DynaPro Plate Reader III – Automated Biopharmaceutical and Nanoparticle Characterization

View Video

Digital Printing Capability for Food Serviceware

See Box has applied the latest in Swiss digital printing technology to their Riiqi Cup brand of Ingeo cups to provide a new level of vibrant graphics, and eliminate the need for minimum order quantities.

View Video

Video to Show Casting of Electrical and Electronic Components

Casting Casting without process forces is a stress-free way of providing lasting protection for sensitive electronic assemblies.

View Video

Video to Show Bruker Daltonics' timsTOF Pro

The timsTOF Pro with PASEF technology delivers revolutionary improvements in scan speed, coupled with enhanced specificity and high sensitivity.

View Video

Inovenso's Electrospinning machine: NS Mini Pilot

Scale-up to the pilot line of Electrospinning with Inovenso's NS Mini Pilot.

View Video

Brillant 240 - Semi-Automatic Cut-Off Machine

The Brillant 240 is a compact and flexible semi-automatic abrasive cut-off machine with a 254 mm/10” cut-off wheel for workpieces or samples up to Ø 95 mm.

View Video

Bruker Nano Surfaces Tribology and Mechanical Testing Workshop at the University of Sheffield

On May 22nd 2013 - AZo.TV attended the Tribology and Mechanical Testing Workshop by Bruker Nano-Surfaces at the University of Sheffield. Taking part in workshops and seminars with such experts as Steve Shaffer, PhD - senior applications scientist.

View Video

Optical Dilatometry Platform - ODP860 Series

Scalable and field-upgradeable, the ODP 868 can be configured to operate in any combination of heating microscope, True Differential™ horizontal or vertical dilatometer, fleximeter or True Differential™ fleximeter modes.

View Video

A Video to Demonstrate Gas Detection Solutions in Breweries

Today’s modern brewing industry demands the same exacting standards of safety as it requires for the quality of its beverages. 3M Gas & Flame Detection, through its innovative and flexible approach, provides solutions specific to brewing requirements.

View Video

Advanced Sharing, Data Management and Storage for X-MET, Vulcan and LAB-X

ExTOPE connect is an advanced data management and storage service that allows you to store your results safely, share data instantly and access the data in real time from any computer.

View Video

Large General Purpose Industrial Oven - LGP - CARBOLITE GERO

The LGP large general purpose ovens offer the greatest choice of options in size and maximum temperature. The range spans from 500 to more than 13,000 litres, with a temperature span from 250 °C to 700 °C.

View Video

Overcome Difficult Plastic Manufacturing Challenges

Designed to help the plastics industry overcome the most difficult manufacturing challenges, Moldex3D R16 provides users with more powerful simulation capabilities and notable performance improvements to increase the reliability of numerical simulation results.

View Video

Particle X-Plorer Software Module - RETSCH TECHNOLOGY

The RETSCH TECHNOLOGY software module Particle X-Plorer is used in both our particle analysis systems CAMSIZER P4 and CAMSIZER X2 and offers the user a wealth of features and possibilities to obtain in-depth knowledge of his sample.

View Video

Pneumatic Side Action Grips - Alignment Device

Instron’s pneumatic side action grips feature optional specimen alignment devices which increase repeatability by helping operators load the specimen in the center of the grips.

View Video

Optical Emission Spectrometer (OES) - FOUNDRY-MASTER

To find out more about FOUNDRY-MASTER Optical Emission Spectrometer (OES) visit https://hha.hitachi-hightech.com/en/product-range/products/optical-emission-spectrometers/desktop-benchtop-floorstanding-oes

View Video

Particle Properties

View Video

XRD-Mill McCrone - Handling video

The XRD-Mill McCrone was specially developed for the preparation of samples for subsequent X-ray diffraction (XRD). The mill is used for applications in geology, chemistry, mineralogy and materials science, quality control as well as R&D.

View Video

CARBOLITE GERO High Pressure Sintering Furnace LHTG

High pressure sintering furnace up to 100 Bars and 3000°C

View Video

Video Demonstration of the DMA 3200

This video demonstrates the capabilites of the DMA 3200.

View Video

A Complete Range of Spark Spectrometers for Process Control

This video details the complete range of Hitachi High-Tech Analytical Science's spark spectrometers for process control.

View Video

Powering Innovations At Pittcon 2013

Are you interested in the latest research and developments in laboratory science? Attend Pittcon 2013 for access to over 2,000 technical presentations, exhibitors from over 30 countries, short courses to enhance your professional development and unique networking opportunities with your colleagues.

View Video

Hot Water Compression TEst of Ingeo-Based High Heat Serviceware

Jointly developed between Northern Technologies International Corporation and NatureWorks, Natur‑Tec® BF3002HT is a platform of high-performance, biobased and compostable polymer resin compounds made with modified Ingeo PLA.

View Video

The CETR-Apex Nanomechanical Testing System form Bruker Nano

Bruker's CETR-Apex system is a nanomechanical testing system that features easily interchangeable heads allowing it to be able to used as a nano or micro indentation system as well as micro and nano scratch. Denis Koosau from Bruker shows us how easy it is to change a test head in this short video.

View Video

RETSCH TECHNOLOGY Company Video - Solutions in Particle Sizing

RETSCH TECHNOLOGY's core competence is to combine innovative particle characterization technology with maximum operating convenience.

View Video

LightField 5 Software Introduction from Princeton Instruments

The future of scientific imaging and spectroscopy software is LightField!

View Video

BioMEMS Process Solutions

Oxford Instruments Plasma Technology collaborates with Southampton University to provide solutions for cutting edge research into BioMEMS.

View Video

Tube Furnace Accessories for CARBOLITE GERO Tube Furnaces

CARBOLITE GERO is a leading tube furnace manufacturer. The video shows different options for our tube furnaces to create vacuum, inert gas and hydrogen atmospheres by the use of end seals.

View Video

Video of High Capacity Linear Stage - Dover Motion XYL™ Series

The Dover Motion XYL™ Series High Capacity Linear Stage is a large payload capacity, crossed roller table. This platform has extended XY travel up to 685 mm which allow it to handle 450 mm wafers.

View Video

Raman in 90 seconds with FERGIE - Live at Photonics West 2017

Raman in 90 seconds with FERGIE - Live at Photonics West 2017.

View Video

CAMSIZER X2 - RETSCH TECHNOLOGY - Short Introduction

The quality control of fine powders can be substantially improved with the new CAMSIZER X2: More precise and faster analysis of particle size and particle shape helps to improve the product quality, reduce rejects and save labor costs, energy and raw materials.

View Video

Humidity Sensors and Modules from IST AG

Introduction to Innovative Sensor Technology IST AG Humidity Sensors and Modules.

View Video

ELTRA Oxygen, Hydrogen and Nitrogen Analyzer ONH-p - Introduction

The ELEMENTRAC ONH-p determines oxygen, nitrogen and hydrogen in inorganic samples by inert gas fusion in an impulse furnace with temperatures in excess of 3.000 °C.

View Video

Safety Improvements for Instron APPS LAB

In this video, we offer quick tips on how to safely use an Instron® universal testing system.

View Video

CIGS and CdTe Thin Film Solar Cells: New Target Designs for More Material Utilization

Changing the sputtering system from planar to rotary targets increases the target utilization from about 30% to 75%, which saves expensive raw material.

View Video

The EM TIC 3X Milling System from Leica Microsystems

The EM TIC 3X Milling System surpasses conventional slope cutting instruments. It can mill at high rates, cut broad and deep into the sample, and create smooth surfaces resulting in high-quality cross-sections of almost any material, quickly and easily.

View Video

Handheld XRF analyser X-MET8000 for scrapyards

View Video

Cutting Mill SM 300 - Cleaning the Machine

The SM 300 is suitable for the grinding of soft, medium-hard, tough, elastic, fibrous, and heterogeneous mixes of products.

View Video

Shear Cell Testing using the FT4 Powder Rheometer

View Video

Particle Analysis with the CAMSIZER® P4 – Retsch Technology

The CAMSIZER P4 particle analyzer has been developed to comprehensively characterize dry, free flowing bulk materials. Whereas traditional sieve analysis, for example, can only determine the approximate particle size, the CAMSIZER P4 simultaneously measures both particle size and shape – with much more detail and at a higher resolution.

View Video

Laser Hardening with AL-ROCK - Video

Laser hardening is a process with which the wear behaviour of components can be specifically influenced.

View Video

Reliable Handheld LIBS Analyser - Vulcan

To find out more about Vulcan visit https://hha.hitachi-hightech.com/en/product-range/products/handheld-xrf-libs-analysers/handheld-libs-analysers

View Video

Pneumatic Side Action Grips - Jaw Face Shields

Instron’s pneumatic sifde-action grips can be equipped with jaw face shields that allow a specimen to be inserted but prevent finger picnhes.

View Video

Reliable Handheld XRF Analyser - X-MET8000

Fast screening for heavy metals, dramatically reduce the need for laboratory analyses. Easy to use in harshest environments and weather conditions.

View Video

Elemental Analyzer CS-2000 - ELTRA

The Elemental Analyzer CS-2000 is the only analyzer on the market for the determination of carbon and sulfur in organic as well as inorganic samples.

View Video

Handheld LIBS Analyser for Scrap Metal Analysis

Vulcan is one of the fastest metals analysers that is built to last.

View Video

Video to Show Universal Software for Next Generation Static Materials Testing (Extended)

Discover simpler and smarter testing with features such as pre-loaded test methods, QuickTest in seconds, enhanced data exporting, and Instron Connect—a new feature that provides a direct communication link to Service.

View Video

LightField The Power of Math with Princeton Instruments

LightField The Power of Math with Princeton Instruments.

View Video

Video to Show ElectroPuls Simulation

This video demonstrates ElectroPuls simulation from Instron.

View Video

High Resolution Horizontal Dilatometers - DIL 830 Series - Video

The 830 Series is an ideal tool for R&D laboratories to measure the linear thermal expansion and to calculate the CTE of polymers, ceramics, glasses, building materials, high performance materials, metals and alloys with exceptional accuracy.

View Video

ATM Easy Spannsystem -- ATM Easy Clamping System

Run Time - 1:25

View Video

The Spinsolve Carbon benchtop NMR spectrometer - for every chemistry lab from Magritek

The Spinsolve® series of high-performance, low-cost benchtop NMR spectrometers the Spinsolve® Carbon is perfect for Chemistry Education, Synthetic Chemists and Reaction Monitoring.

View Video

Rotor Beater Mill SR 200 & SR 300 - RETSCH

The Rotor Beater Mill SR 300 is suitable for coarse and fine size reduction, either in batches or continuously. It can process dry, soft, medium-hard, organic and inorganic substances.

View Video

Vibratory Polishing Machine SAPHIR VIBRO – ATM

The vibratory polishing machine Saphir Vibro is designed for the preparation of specimen surfaces practically without deformation.

View Video

Webinar on Effortless Evaluation of Emulsion Behavior from HORIBA

This video from HORIBA gives a presentation on effortless evaluation of emulsion behavior, which is usually ascertained by the size of the droplet.

View Video

The SpectroVISC Q3000 Kinematic Viscometer from Spectro Inc

Dan Walsh from Spectro Inc shows us the main features and demonstrates just how fast and easy the Spectro VISC Q3000 portable kinematic viscometer is to use. It is extremely small and can be easily taken on-site to provide on the spot viscosity readings, producing results in a matter of seconds.

View Video

Pneumatic Side Action Grips - Adjustable Opening

Instron’s 1, 2, 5, and 10 kN pneumatic side-action grips feature adjustable jaw face openings which can be set to the thickness of the specimen, increasing safety by preventing fingers from being inserted.

View Video

Demonstration of the XploRA Raman System from HORIBA

Vincent Larat from HORIBA explains how the XploRA Raman spectrometer works and provides us with a real time demonstration of how the system works.

View Video

Unlocking The Power Of Analysis - A Video from Hitachi High-Tech Analytical Science

This video details the capabilities of Hitachi High-Tech Analytical Science in helping you analyse your materials.

View Video

Introduction to Moldex R16 New Features

Moldex3D Studio adds new capabilities to assist in further streamlining the simulation process, from automatically repairing imported geometry and probing analysis results at specific locations, to generating a completely customized report template and comparing run-to-run results.

View Video

CARBOLITE GERO Soldering Brazing Furnace Range V-L

The CARBOLITE GERO V-L soldering and brazing furnace is suitable for generating the lowest achievable operation pressures. Due to this vacuum capability, the highest purity gas atmosphere can be achieved.

View Video

Inovenso's Electrospinning machine: NS Mini Pilot

Scale-up to the pilot line of Electrospinning with Inovenso's NS Mini Pilot.

View Video

HBLED Applications and Systems: Enabling the Revolution of Solid State Lighting

Oxford Instruments Plasma Technology presents an evolution in Batch Etch technology. The HBLED industry justifiably demands high throughput, optimum device quality and low cost of ownership.

View Video

Running a Multi-Component Molding Analysis

Moldex3D Studio adds new capabilities to assist in further streamlining the simulation process, from automatically repairing imported geometry and probing analysis results at specific locations, to generating a completely customized report template and comparing run-to-run results.

View Video

Jayhawk Custom Manufacturing Services

View Video

Video of Production Systems with Integrated Mixing and Dispensing Solutions

RAMPF develops production systems with integrated mixing and dispensing solutions for the casting, sealing, and bonding of various polymers.

View Video

Should You Choose a LIBS Analyzer or a Handheld XRF?

Watch our latest video to find out when you should be choosing a LIBS analyzer over handheld XRF. Hitachi makes it really simple for you.

View Video

The ICAP-Q ICPMS from Thermo Scientific

The ICAP-Q ICPMS from Thermo Scientific is a new instrument that has been designed from the ground up that not only provides ease of use, but also easy maintenance. While the software interface makes the instrument easy to drive other features such as the redesigned Q-Cell collision cell help increase productivity by a factor of 2 over other ICPMS systems as well as improving sensitivity by 3 to 4 times.

View Video

CAMSIZER P4 - RETSCH TECHNOLOGY - Short Introduction

The CAMSIZER P4 particle analyzer has been developed to comprehensively characterize dry, free flowing bulk materials.

View Video

Video to Demonstate a Durapulse SGT Stent/Graft Tester

The NEW DuraPulse™ Stent/Graft test (SGT) instrument extends the performance and reliability that ElectroForce SGTs have become known for over the past 20 years.

View Video

Video to Show a Realtime Fatigue Monitoring System

An brief overview perspective of Stress Engineering's Realtime Fatigue Monitoring System (RFMS).

View Video

RETSCH TECHNOLOGY - Motorized Guidance Sheet for CAMSIZER P4

The patented Motorized Guidance Sheet for the RETSCH TECHNOLOGY CAMSIZER P4 was exclusively designed for special applications in order to preferentially orient the particles.

View Video

CARBOLITE GERO Semi-Automatic Furnace HTK 8 GR 22

The vacuum furnace HTK GR is a graphite furnace which operates with rough/fine vacuum, protective gases such as Nitrogen/Argon, and reactive gases like Hydrogen and Carbon Monoxide.

View Video

Ultra Centrifugal Mill ZM 200 - Introduction

The Ultra Centrifugal Mill ZM 200 is a high speed rotor mill with unmatched performance. It is used for the rapid size reduction of soft to medium-hard and fibrous materials. Because of the efficient size reduction technique the ZM 200 ensures the gentle preparation of analytical samples in a very short time.

View Video

PMI (Positive Material Identification) Testing with Analysers from Hitachi High-Tech Analytical Science

This video details the capabilities of Hitachi High-Tech Analytical Science's PMI (Positive Material Identification) testing with its analysers.

View Video

Video to Show the Range of X5 X-Ray Inspection Equipment from LOMA SYSTEMS

This video shows the latest range of X-Ray Inspection equipment from LOMA SYSTEMS.

View Video

Princeton Instruments' eXceleon CCD EMCCD Technology

eXcelon Technology from Princeton Instruments delivers CCD and EMCCD with high sensitivity from UV to NIR, low etaloning and low dark current.

View Video

ZSX Primus Series of wavelength dispersive X-Ray fluorescence spectrometers from Rigaku

The ZSX Primus Series of wavelength dispersive X-Ray fluorescence spectrometers from Rigaku continues the tradition of delivering accurate results in both a timely and seamless manner, with unsurpassed reliability, flexibility, and ease of use to meet any challenges in the lab.

View Video

Video to Show the Capabilities of the TAM Air Isothermal Calorimeter

Delivering the performance, reliability, and ease-of-use that is the hallmark of TA Instruments products, the new TAM Air maintains its leadership position as the instrument of choice for cement and concrete hydration analysis using ASTM C1702 and C1679, as well as a powerful isothermal calorimeter for use in a wide range of emerging applications.

View Video

CryoMill Handling

The CryoMill is a lab mill tailored for cryogenic grinding. The grinding jar is continually cooled with liquid nitrogen from the integrated cooling system before and during the grinding process.

View Video

Nicolet iS50 FTIR Spectrometer from Thermo Scientific at Pittcon 2013

In this video Simon Nunn, Global Marketing Director for Molecular Spectroscopy Thermo Scientific talks about the Nicolet iS50 FT-IR.

View Video

Motor Replacement of the AD 350 V600 - Video

This video shows a motor replacement of the AD 350 V600.

View Video

Ovens and Furnaces up to 3000 °C from CARBOLITE GERO

This video details the capabilities of CARBOLITE GERO and their ovens and furnaces.

View Video

A Video Introduction to Laser Induced Breakdown Spectroscopy (LIBS)

In this video, Mikko Järvikivi, LIBS Product Manager at Hitachi High-Tech Analytical Science, explains what Laser Induced Breakdown Spectroscopy is.

View Video

Pneumatic Side Action Grips - Specimen Holding Device

Instron’s pneumatic side-action grips feature optional specimen holding devices that allow an operator to close the grips with their fingers out of the test space.

View Video

Video to Show Software Upgrades for Static-Hydraulic Testing

This video shows an upgrade path is now available for Partner Software users to move to the NEW Bluehill Universal platform.

View Video

Vertical Motion Z Stage - The Dover ZE™

The Dover ZE™ Stage is a vertical motion Z stage that uses a Z wedge setup drive by either step or servo motor for accurate positioning.

View Video

Mechanisms that Contribute to Powder Flow

View Video

An Introduction to Back Illuminated sCMOS Cameras

Ravi Guntupalli explains the latest back illuminated sCOMS camera technology and introduces the Princeton Instruments KURO sCMOS camera.

View Video

Webinar on Dynamic Light Scattering Size Data

This video from HORIBA shows a brief presentation on how to understand dynamic light scattering data for particle size.

View Video

FERGIE Absorbance Experiment Setup

Learn how to setup a simple absorption experiment using the FERGIE spectrometer system with its flexible ecosystem of CUBES, accessories and software.

View Video

Video to Show a Compact Combination Checkweighter and Metal Detector - CW3

This video shows the new CW3 Compact Combination Checkweigher and Metal Detector: LOMA SYSTEMS.

View Video

Knife Mill GRINDOMIX GM 300 - Introductory Video

The knife mill GRINDOMIX GM 300 is the ideal instrument for the grinding and homogenization of foodstuffs. It allows to process sample volumes up to 4.5 liters quickly and reproducibly.

View Video

Video of the Range of IQ4 Metal Detection Devices

This video shows the of the range of IQ4 metal detection devices available from LOMA SYSTEMS.

View Video

Detecting Stainless Contamination of Food Items - Video

This video shows X-ray Inspection - stainless steel contamination detection [tea bags in metallised foil].

View Video

6D Non-Contact Surface Metrology for Aspheric Optics with 6-Axis Hexapod Motion System

THis is a video about 6D Non-Contact Surface Metrology for Aspheric Optics with 6-Axis Hexapod Motion System

View Video

Video to Show a QuickTest Using the BlueHill Universal

This video demonstrates a QuickTest using the BlueHill Universal from Instron.

View Video

Lightweight Composite Interiors for Aerospace - Video

This video shows how TRB design, manufacture and deliver under Part 21, lightweight composite interiors for aerospace.

View Video

MALDI Molecular Imaging from Bruker

Katherine Kellersberg discusses MALDI Molecular Imaging within Bruker products at WMIC in Savannah.

View Video

'The Complete Tribology Lab' - Universal Mechanical Tester (UMT) from Bruker Nano

Bruker's UMT Universal Mechanical Tester. The UMT is the "complete tribology lab" and provides macro, micro and nanoscale tests under real-world conditions. Talking to Bruker's Steve Shaffer and University of Sheffield's Mark Rainforth, they discuss the ease of use and the typical applications of the UMT.

View Video

DIM and PULSE options for the NIGHTSEA Stereo Microscope Fluorescence Adapter

The standard Model SFA Stereo Microscope Fluorescence Adapter has a simple ON/OFF switch. This is adequate for most customers, who want the maximum excitation intensity so that they see maximum fluorescence from their samples.

View Video

High Energy Ball Mill Emax – Handling

The High Energy Ball Mill Emax is an entirely new type of ball mill for high energy milling. The unique combination of high friction and impact results in extremely fine particles within the shortest amount of time.

View Video

Sulfur in Fuel Analysis to ASTM D4294, ISO8754 and IP336 - A Video of the X-MET8000

This video deomnstrates how the X-MET800 can be used for sulfur in fuel analysis to ASTM D4294, ISO8754 and IP336.

View Video

Tensile Tests on Plastics with MakroXtens - Zwick Roell

Zwick Roell Video: Tensile tests on plastics to ISO 527 with makroXtens extensometer

View Video

Heating Brass Inserts for Metal-to-Plastic Insertion with Induction

In this video, two brass inserts are heated to temperature with an Ambrell EASYHEAT 2 kW induction heating system.

View Video

CAMSIZER X2 - Product Video

The quality control of fine powders can be substantially improved with the new CAMSIZER X2: More precise and faster analysis of particle size and particle shape helps to improve the product quality, reduce rejects and save labor costs, energy and raw materials.

View Video

Company Video for LOMA Inspection Systems

Company video for LOMA Inspection Systems for the food, pharmaceutical and packaging industry.

View Video

Intelligent Automated 3D Scanner for Quality Control

This video shows intelligent automated 3D scanner for quality control.

View Video

Sample Divider PT 100 - RETSCH

The Sample Divider PT 100 divides the sample so exactly that the composition of each fraction of the sample corresponds exactly to that of the original bulk sample.

View Video

Esprix Technologies Corporate Video

This is the corporate video for Esprix Technologies.

View Video

Video of PULVERISETTE 11 - Industrial Grade Knife Mill

The quietly operating Knife Mill PULVERISETTE 11 is the ideal laboratory mixer for very fast and gentle comminution and homogenisation of moist, oily and fatty as well as of dry, soft, medium-hard and fibrous samples.

View Video

Video to Show the Fluorescent Replacement - LHF300

This page shows a video of the LHF300 fluorescent replacement.

View Video

The Future of Graphene and 2D Materials

Oxford Instruments are experts in high technology systems and processes including CVD, ALD and PECVD.

View Video

Pellet Press PP 35 - RETSCH Laboratory Equipment

The Pellet Press PP 35 produces solid, high-quality pellets with a smooth surface, an important precondition for reliable and meaningful XRF analysis.

View Video

ELTRA - Elemental Analyzers

ELTRA is one of the world's leading manufacturers of elemental analyzers for rapid and accurate analysis of solid materials. Our elemental analyzers provide tailor-made solutions for a wide range of samples and concentrations. Thousands of satisfied customers worldwide are proof of the quality and reliability of ELTRA analyzers.

View Video

Video to Show the Sensitive Calorimeter System - TAM IV

For over 30 years, scientists have trusted the high sensitivity calorimetric measurements of the TAM system. The tradition of excellence continues with the all-new TAM IV; the world’s most sensitive, versatile, and reliable calorimeter from TA Instruments.

View Video

Video Introduction to Dilatometry

TA Instruments provides the widest range of high precision dilatometers for the measurement of thermal expansion, sintering, phase transitions, and more.

View Video

Biosensors from IST AG

Introduction to Innovative Sensor Technology IST AG Biosensors.

View Video

The SynthWAVE Microwave Reactor - Milestone - MRS2012

View Video

Investing in a Handheld XRF for Quality Assurance and Control

Hitachi customer stories: SCHMOLZ + BICKENBACH use the X-MET8000 handheld XRF for quality assurance and control.

View Video

Video of Motor Linear Actuator - Dover MAG Servo

The Dover MAG Servo Motor Linear Actuator is a compact, high-performance, direct drive table suitable for use in a wide range of applications.

View Video

Video to Show the HELOS | Particle Size and Particle Size Distribution with Laser Diffraction

View Video

Why Exhibit at Pittcon 2014?

Pittcon is the leading showcase for scientific and technical innovation, with a singular focus on laboratory science. From 90 countries, thousands of conferees visit Pittcon each year to evaluate new technologies and products, form valuable business connections and formulate purchase decisions.

View Video

Customized Report Templates - Moldex3D R16

Moldex3D Studio adds new capabilities to assist in further streamlining the simulation process, from automatically repairing imported geometry and probing analysis results at specific locations, to generating a completely customized report template and comparing run-to-run results.

View Video

Video to show TA Instruments' Vertical Dilatometer Series - DIL 820

For the absolute best in sintering studies, look no further than the DIL820 Vertical Dilatometer series.

View Video

Cut-off Machine Brillant 250 - ATM

The BRILLANT 250 is an automatic wet abrasive cut-off machine for samples up to max. Ø 135 mm. Due to its low contact cutting (lcc) function, it gently cuts different types of samples with various geometries, sizes and materials.

View Video

Cutting Mill SM 100, SM 200 & SM 300 - RETSCH

The Retsch cutting mill series is used successfully for the efficient preliminary size reduction of a huge variety of materials.

View Video

Tango Near Infrared Spectrometer for Quality Control from Bruker

In this video Dean Roberts, Manager-US Food, Feed and Agriculture Markets - Bruker demonstrates the working and application of Tango near IR spectrometer.

View Video

A Video to Show 3M's Single Gas Monitor - Protege ZM

he Protege ZM Single Gas Monitor is an easy-to-use, zero-maintenance gas detection solution that delivers high performance in a small, ergonomically designed package.

View Video

Princeton Instruments' LightField Software - Setup, Acquire, Analyze and Export

The video describes how LightField software helps you set up your experiment, acquire images and spectra, and review, analyze and export your data.

View Video

Heart Valve Durability Tester - DuraPulse™ Video

Powered with ElectroForce Technology, the DuraPulse™ system can be configured to support two, four, or six simultaneous and separate tests at once, while maintaining the highest quality in control and data!

View Video

Pneumatic Side Action Grips - Quick Release Hose

Instron’s pneumatic side-action grips can be changed in and out easily by using a quick-release hose.

View Video

SZ-100 Nanoparticle Size Analyzer from HORIBA

Mark Bumiller from Horiba shows us their latest addition, the SZ-100, nanoparticle size analyzer/characterization system. It is suited to analyzing particles in the sub-micron range. The SZ-100 uses dynamic light scattering (DLS) technology to look at brownian motion to measure particle size.

View Video

Oil & Gas Applications | For the Most Powerful & Fastest Laser Cleaning choose Andritz Powerlase

Laser Cleaning, Oil & Gas

View Video

OpenPlex for Molecular Interaction Analysis from HORIBA

This video shows how to get easy multiplex molecular interactions investigations with the help of OpenPlex from HORIBA Scientific.

View Video

Bulk Powder Behaviour

View Video

Vacuum Furnace HTK 600 GR - CARBOLITE GERO

The vacuum furnace HTK GR is a graphite furnace which operates with rough/fine vacuum, protective gases such as Nitrogen/Argon, and reactive gases like Hydrogen and Carbon Monoxide.

View Video

Axial Depth Profile of Multlayer Polymer Films Using Confocal Raman Spectroscopy

This video from Horiba shows the presentation and analysis of spectra obtained by Confocal Raman spectroscopy to create an axial depth profile of multlayer polymer films.

View Video

Pneumatic Side Action Grips - Offsettable Jaw Faces

Instron’s 5 and 10 kN pneumatic side-action grips feature offsetable jaw faces which can be used to perform tests such as lap-shear.

View Video

Planetary Ball Mill PM 100 - Introduction

The Retsch Planetary Ball Mill / Laboratory Mill Range meets and exceeds all requirements for fast and reproducible grinding down to the nano range.

View Video

ATM - Machines and Equipment for the Materialographic Laboratory - Made in Germany

Whatever you need for quality testing and material analysis, ATM has it all: As a manufacturer of high-quality machines for materialography (metallography), we offer the most comprehensive solution for your needs.

View Video

VSPARTICLE's VSP-G1 and Tools Enable Solar Energy Conversion and Storage

"There is an immediate need to find renewable and sustainable energy sources that can replace fossil fuels." states Wilson Smith, Associate Professor at TU Delft. According to his experience, new materials can provide us with sustainable technologies improving our ability to convert, store and re-use energy. Professor Smith is an Ambassador of the VSPARTICLE technology, because the VSP-G1 (and deposition accessories) enables the generation of nanoparticles in few minutes, controlling the size and the properties of any semi-conductive and conductive material. Discover more about our tools on: www.vsparticle.com Read more about the Smith Solar Lab: http://www.smithsolarlab.com/

View Video

The Dimension Fastscan Atomic Force Microscope (AFM) from Bruker Nano

The Dimension Fastscan from Bruker is the fastest AFM on the market. John Thornton takes us for a tour of this instrument pointing out key features and runs a demonstration to illustrate how fast data can be collected. The speed of this instrument make it suited to rapid sampling across large samples and production environments where speed is critical.

View Video

The KLA Tencor MicroXAM100 Profilometer and Interferometer

The MicroXam100 from KLA Tencor is a surface profilometer and white light optical interferometer. Jim Zobel explains how the system works and demsinatres it's fast data acquisition rates.

View Video

Filter Change of the V600 and AD 350 - Video

This video shows a filter change of the V600 and AD 350.

View Video

Video to Show the QICPIC | Particle Size and Particle Shape Analysis with Dynamic Image Analysis

View Video

Mortar Grinder RM 200 – Introduction

The Mortar Grinder RM 200 can mix and homogenize powders, suspension and pastes even with high viscosity. The RM 200 is suitable for the proper and reproducible sample preparation to analytical fineness.

View Video

High Energy Ball Mill Emax - Retsch

The High Energy Ball Mill Emax is an entirely new type of laboratory ball mill, especially developed for high energy milling.

View Video

Video to Show a High Temperature Laser Flash Diffusivity System - DLF 1600

Featuring a laser 40% more powerful than any other on the market, 5 position carousel for accurate and precise heat capacity measurements, the DLF 1600 is the best performing high temperature laser flash diffusivity system available.

View Video

An Introduction to Powders (with English annotations) from Freeman Technology

View Video

A Guide to Fluids for Transmission and Distribution Applications

MIDEL fluids are designed to safeguard a wide range of power transmission and distribution applications.

View Video

Tensile Tests on Metals with Makroxtens - Zwick Roell

Zwick Roiell video on Tensile tests on metals with Makroxtens

View Video

Filter Change of the DP Universal - Video

This video shows a filter change of the DP Universal.

View Video

GPS Synchronisation of a DL850 ScopeCorder - Event monitoring & precision timing

View Video

A Handheld X-Ray Fluorescence Analyzer for a Competitive Advantage in Composition Analysis

AVID invested in the X-MET8000 Expert handheld X-ray fluorescence analyser (XRF) from Hitachi High-Tech to make the composition analysis of their products efficient and reliable.

View Video

Video to Show Machine Vision Applications

This video shows machine vision applications.

View Video

Video to Show How NeoSight Can Be Used for Floating Systems

NeoSight is an platform designed to leverage and supplement new or existing digitalization efforts with a primary goal to provide hindsight, insight and foresight into the performance and integrity of an asset, regardless of industry or application.

View Video

XTrace Micro-Spot X-Ray Source from Bruker

In this video Stephan Boehm, Project Manager, Micro-XRF for SEM, Bruker Nano talks about the XTrace Micro-Spot X-Ray Source.

View Video

Benchtop XRF - Shimadzu EDX-LE X-Ray Fluorescence System

Dan Davis from Shimadzu shows us their EDX-LE benchtop x-ray fluorescence (XRF) instrument. he shows us key features such as the sample positioning camera and runs a sample in real time for us.

View Video

Microtrac - Corporate Video

This video is an introduction to Microtrac and the type of products it provides.

View Video

A Video to Show the FOUNDRY-MASTER Pro2

This video details the capabilities of Hitachi High-Tech Analytical Science's FOUNDRY-Master Pro2.

View Video

Rampf Group Corporate Video

The RAMPF Group stands for engineering and chemical solutions and caters to the economic and ecological needs of industry.

View Video

LightField - Designed for Researchers

Learn how the powerful LightField software was designed with the demands of researchers in mind.

View Video

High Temperature Oven with Modified Atmosphere - HTMA - CARBOLITE GERO

The HTMA series is a range of high temperature modified atmosphere ovens for use with inert atmospheres up to 700°C.

View Video

Uniaxial Powder Testing from Freeman Technology

View Video

Retrofilling Distribution Transformers Case Studies

This video shows Retrofilling Distribution Transformers Case Studies.

View Video

Video to Show Cladding with a Mobile Laser System

Cladding with metal powder is ideal for the repair of big surfaces because defined and large areas can be built up quickly and efficiently.

View Video

RETSCH Company Video - Solutions in Milling & Sieving

With a tradition of more than 100 years of innovation, RETSCH is the global market leader in the preparation and characterization of solids. RETSCH stands for quality “made in Germany”. Learn more about the company and our products at http://www.retsch.com

View Video

JEC-AWARDS13-THERMOPLASTICS

View Video

Tim Drake - Aspex Corp - ASPEX EXpress Desktop - Pittcon 2012

Tim Drake from Aspex Corp at Pittcon 2012.

Introducing the ASPEX EXpress Desktop SEM: When size and budgets are key, the ASPEX EXpress desktop SEM provides superior particle analysis capabilities at an affordable price. Designed for "out of the lab" applications, the ASPEX EXpress desktop has plenty of power to do routine automated particle analysis with ease, speed and reliability.

View Video

Fast and Easy to Use Benchtop XRF Analyser - LAB-X5000

To find out more about LAB- X5000 visit https://hha.hitachi-hightech.com/en/product-range/products/benchtop-xrf-analysers/benchtop-bulk-analysis-xrf-analysers

View Video

Video to Demonstate ITC Automation with Affinity ITC

ITC automation can lead to bent syringes and imperfect data, however, TA Instruments has perfected it with the all new Affinity ITC!

View Video

Graphene Based Coatings Designed for Active and Passive Corrosion Prevention

University at Buffalo chemists are using graphene, to develop new coatings for rust-proofing steel.

View Video

The Aqualog Simultaneous Absorbance and Fluorescence EEMS from HORIBA

Adam Gilmore from HORIBA shows us their all new, first to market Aqualog, simultaneous absorbance and fluorescence EEMS (excitation emission matrices) system. It uses a CCD as the detector making it 100 time faster than other instruments. This means that measurements that may have taken several minutes can now be completed in just seconds.

View Video

Materials Videos

Featured Materials Videos