Gas Analyzers RSS Feed - Gas Analyzers

Gas analyzers are designed for detecting the concentration of gases to parts per million.
If you'd like us to help you source a Quotation for Gas Analyzers please click here. Once submitted, we will try and place you in contact with a suitable Gas Analyzers supplier within 48 hours.
Featured Equipment
Systech Illinois offers the 8001 oxygen permeation analyzer, which is versatile and easy to operate. Equipped with two stations for testing packages or films, the instrument provides the highest quality coulometric oxygen sensor in the market.
Scanning imaging remote sensing system for identification, visualization, and quantification of hazardous gases.
Systech Illinois offers a sophisticated headspace gas analyzer called Gaspace Advance. Equipped with advanced features, this oxygen and carbon dioxide headspace analyzer provides automatic control, calibration and diagnostics which ensure that the instrument always performs accurately.
Other Equipment
Fourier transform infrared spectrometer (FT-IR) spectroscopy is a well-established analytical method. FT-IR spectrometers are used in numerous laboratories.
Systech Illinois offers programmable gas analyzers for thermal conductivity analysis.
The oxygen analyzers from Systech have been designed to measure precisely oxygen levels within most industrial gases.
The Hiden QGA quantitative gas analysis system is designed to handle continuous analysis of gases and vapours at pressures near atmosphere in standard form. Inlet accessories are provided so that the system can handle sampling from low to high pressures, up to 30bar.
The MAX300-AIR is an advanced industrial gas analyzer specifically developed for environmental monitoring and regulatory compliance. A single analyzer is capable of measuring unlimited compounds and it can be automated to track more than 160 sample points, spread across the production site.
The Hiden HPR-20 QIC TMS Transient MS has been specially designed for rapid event gas analysis of gases and vapours at pressures near atmosphere. The MS features the Hiden QIC quartz-lined 0.9m sampling interface. It is suitable for rapid gas switching experiments.
The Residual Gas Analyzer (RGA) from Extrel enables reliable, full-range pressure measurement at an affordable cost. It includes a Faraday cup detection system with an optional electronic multiplier, providing sensitivity up to 5x10-14 torr.
The MAX300-LG™ laboratory gas analyzer packages the analytical capabilities of our high performance Industrial mass spectrometer for the laboratory.
The 875 KF gas analyzer offered by Metrohm is a complete configured system specifically designed for automatic determination of coulometric water content in permanent and liquefied gases.
Pegasus GC-HRT 4DM is the latest gas chromatography system from LECO. It is an innovative tool that provides users with the remarkable ability to examine complex samples and identify unknown analytes.
The PERSEUS® TG 209 F1 is a robust, compact and cost-effective instrument capable of delivering excellent performance. It is a combination instrument that possesses the advantages of the FT-IR instrument and the TGA, thus making it ideal for use in any laboratory.
The PERSEUS® STA 449 F1/F3 is basically a combination of two well-established instruments - the NETZSCH STA 449 F1/F3 Jupiter® and Bruker Optics’ FT-IR spectrometer.
Metrohm’s 875 KF gas analyzer is an advanced instrument designed for automatic coulometric water content determination in both permanent and liquefied gases.
LECO’s 832 series is designed to simplify determination of sulfur and carbon in an array of organic materials. The company has constructed this series taking into consideration the general customer feedback as well as innovative engineering.
Baseline offers the BevAlert System that surpasses the analytical requirements of the ISBT guidelines for the detection of impurities in beverage-grade CO2, such as benzene, methanol, acetaldehyde, total hydrocarbons, total sulfur, etc.
ABB offers the Endura AZ30 flameproof or explosion-proof combustion gas analyzer system, which is specifically developed for use in hazardous environments.
The TGA/STA-QMS 403 D Aëolos® quadrupole mass spectrometer is a new compact mass spectrometer with a heated capillary inlet system for routine analysis of gases and, in particular, volatile decomposition products of thermal analysis.
The ADI 7010 TOC on-line analyzer available from Metrohm employs the UV persulfate oxidation technique using carbon dioxide detection by non-dispersive infrared analysis.
Metrohm’s 875 KF gas analyzer is a fully automated instrument specifically designed for measuring trace levels of water in both permanent and liquefied gases. The instrument applies the coulometric Karl Fischer titration method, which enables fast and precise analyses.
The IONICON PTR-TOF 1000 is a compact time of flight based PTR-MS designed for measuring trace volatile organic compounds at high time resolution. It is fast, lightweight, sensitive and affordably priced.
The i-Gastra 7100 gas permeability tester from Labthink is designed to analyze gas transmission rate of high barrier materials, aluminum foils, sheeting and films.
The PTR-QiTOF trace gas analyzer from IONICON is a fast and ultra-sensitive device designed for the trace analysis of volatile organic compounds (VOCs) at high mass resolving power and time resolution.
Kaiser Optical Systems’ RAMANRXN4™ gas-phase Raman analyzer is the latest alternative to basic process gas analyzers.
The NOVAtouch™ series gas sorption analyzers offer excellent performance and increased throughput for BET surface area and pore size analyses.
The Extrel atmospheric pressure ionization mass Spectrometer (APIMS) was designed to have consistent, reliable, low parts per trillion detection limits for gas contaminates. The VeraSpec Trace system has been the preferred choice for ultra high purity (UHP) gas contamination analysis and trace pollution studies for more than twenty-five years.
The primary scope of TG-GC-MS coupling is to detect, separate and analyze organic components. It is also possible to use the coupled GC-MS for detailed gas analysis to further improve the temperature-programmed pyrolysis of organic materials, biomass, renewable solid fuels, carbonaceous materials, and polymers in the TG/STA. The volatile products emitted during combustion processes can be determined with high sensitivity and resolution at various oxygen content levels.
The VD series of oil rotary vacuum pumps offered by ULVAC has been specifically developed to enhance work environments.
ULVAC offers a new model of residual gas analyzer called Qulee. Incorporating the inputs of facility engineers working in various production lines, the new product design is simple and easy to use.
The Hiden HPR-20 QIC EGA gas analysis system is capable of handling continuous analysis of evolved gases and vapours from thermogravimetric analysers (TGA).
Extrel’s MAX300 – BIO is an analytical platform designed to provide real-time process data on up to 80+ reactors within the facility as well as offer high sensitivity to measure trace contaminants in the end product.
The new QUADRASORB evo™ Gas Sorption Surface Area and Pore Size Analyzer allows users to run multiple independent samples synchronously at variable start times.
The MAX300-EGA Evolved Gas Analyzer from Extrel is the latest evolved gas analyzer within the high-performance MAX300 family of Extrel.
The CHN628 Series Elemental Determinator is used for quickly generating results in various organic matrices by incorporating the hardware and software technology.
The MAX300-IG™ Industrial Gas Analyzer is Extrel’s seventh generation of high performance, online process mass spectrometers.
The BevAlert® System is developed to surpass the analytical requirements of the ISBT guidelines for detecting impurities in beverage-grade carbon dioxide such as methanol, acetaldehyde, benzene, total sulphur, total hydrocarbons and more.