A component originally manufactured using plastic was quietly driving maintenance costs across a fleet of extraction systems. Replacing it with a custom-engineered ceramic part turned a recurring failure point into a non-issue.

Image Credit: KAMONRAT/Shutterstock.com
Analytical equipment in environmental testing labs is often run continuously and under challenging process conditions. When a piece of standard equipment starts failing repeatedly under those conditions, the fix sometimes requires reconsidering the original material choice.
The Application
Garland Water Utilities Lab, in Garland, TX, operates a dozen accelerated one-step extractor/concentrator systems as part of its wastewater analysis program. These systems perform extraction, concentration, and drying in a single process, using solvents with a higher specific gravity than the sample being extracted to isolate organic materials from wastewater samples.
The extracted organics are subsequently analyzed and the results reported to the EPA, making consistent, reliable system operation a compliance-relevant requirement.
The Failure Point
The extractor systems came as standard with plastic membrane support spacers, which hold the membrane assembly together during the extraction and concentration process. Under the high pressures and temperatures involved in the extraction cycle, these plastic spacers proved to be a persistent weak point: they steadily deteriorated under repeated thermal and mechanical stress, requiring frequent replacement across the lab's 12 systems.
Every replacement cycle meant system downtime and an ongoing parts cost, a recurring operational drag that scaled with the number of systems in use and the frequency of extraction runs.
The Ceramic Redesign
Working with INSACO's engineers, Garland Water Utilities Lab replaced the plastic spacer with a custom ceramic spacer engineered specifically to withstand the extractor's operating pressures and temperatures without degrading.
Ceramics are a natural material choice here: where plastics soften, creep, or break down under sustained thermal and mechanical loading, technical ceramics maintain their dimensional stability and structural integrity across a much wider range of pressure and temperature conditions.
Result
Since the ceramic spacers were put into service, no replacements have been necessary. What was previously a recurring maintenance item, driving both direct parts cost and system downtime across a dozen units, has effectively been eliminated as an operational concern.
For a lab running continuous compliance-driven testing, that translates directly into more consistent uptime and a lower total cost of ownership for the extraction fleet.

This information has been sourced, reviewed, and adapted from materials provided by INSACO Inc. - Machining of Hard Materials.
For more information on this source, please visit INSACO Inc. - Machining of Hard Materials.