S500MC High Yield Steel - Properties and Applications

S500MC is a high strength hot rolled structural steel used for cold formed components. As S500MC is a load bearing steel, considerations regarding suitability need to be made at the procurement stage.

Applications of S500MC High Yield Steel

The material is used in a variety of applications including structural beams, frames and as cold rolled steel sections. The steel benefits from good weldability but heat treatment should be avoided as this is known to reduce the yield strength of the material.

Chemical Composition of S500MC High Yield Steel

The Chemical Composition of S500MC High Yield Steel are summarised in the following table.

Grade C Si Mn P S Al (min) Nb V Ti Mo B
S500MC 0.12 0.50 1.70 0.025 0.015 0.015 0.09 0.20 0.15 - -

(Values % by mass - max unless otherwise stated)

Mechanical Properties of S500MC High Yield Steel

The mechanical properties of S500MC High Yield Steel are summarised in the following table.

Grade Yield (MPa) Tensile (MPa) Elongation
< 3mm ≥ 3mm
S500MC ≥ 500MPa 550-700MPa ≥ 12% ≥ 14%

(Please note: the technical information above is for guidance only - for exact specifications please check with our Sales Team)

Equivalent Grades of S500MC High Yield Steel

The following grade is equivalent to S500MC High Yield Steel:

  • EN 10149 PT2

Source: Masteel

For more information on this source, please visit Masteel.

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Masteel UK Ltd. (2019, July 25). S500MC High Yield Steel - Properties and Applications. AZoM. Retrieved on August 13, 2022 from https://www.azom.com/article.aspx?ArticleID=5350.

  • MLA

    Masteel UK Ltd. "S500MC High Yield Steel - Properties and Applications". AZoM. 13 August 2022. <https://www.azom.com/article.aspx?ArticleID=5350>.

  • Chicago

    Masteel UK Ltd. "S500MC High Yield Steel - Properties and Applications". AZoM. https://www.azom.com/article.aspx?ArticleID=5350. (accessed August 13, 2022).

  • Harvard

    Masteel UK Ltd. 2019. S500MC High Yield Steel - Properties and Applications. AZoM, viewed 13 August 2022, https://www.azom.com/article.aspx?ArticleID=5350.

Comments

  1. Amit Singh Amit Singh Singapore says:

    how can we make S500MC corrosion resistant ???

  2. ss ss ss ss India says:

    Tube required which having min Yield 483 Mpa equivalent is S500 MC, pls suggest supplier near by Pune or in India.

  3. San Ho San Ho Vietnam says:

    Hello everybody.

    I need S420MC Hollow Square Tube. Can you introduce which Mill or which suppliers I can contact to ask about this material?

    Thanks!

  4. San Ho San Ho Vietnam says:

    Hello.

    Who can introduce which Mill or which supplier I can contact to buy S420MC Hollow Square Tube?

    Thanks!

  5. Galaxy Enterprise Galaxy Enterprise Bangladesh says:

    does HR coils with Tensile Strength of more than 500 have problems in unrolling (cutting into plate)

The opinions expressed here are the views of the writer and do not necessarily reflect the views and opinions of AZoM.com.

Ask A Question

Do you have a question you'd like to ask regarding this article?

Leave your feedback
Your comment type
Submit