A - Z of Powder Metallurgy
|
Additives and Crystallization Processes: From Fundamentals to Applications
|
Adhesion to Fluoropolymers
|
Advanced Structural Materials: Properties, Design Optimization, and Applications
|
Advances in Applied Ceramics
|
Advances in Bioceramics and Biocomposites II
|
Advances in Ceramic Armor II
|
Advances in Materials Technology for Fossil Power Plants
|
Advances in Solid Oxide Fuel Cells II
|
Alloy Phase Diagrams
|
Alloy Physics: A Comprehensive Reference
|
Alloying: Understanding the Basics
|
Aluminum and Aluminum Alloys
|
Aluminum Extrusion Technology
|
Aluminum Recycling
|
Aluminum Recycling and Processing for Energy Conservation and Sustainability
|
Aluminum: Properties and Physical Metallurgy
|
An Introduction to Rubber Technology
|
Applied Electromagnetism and Materials
|
Applied Scanning Probe Methods V
|
Applied Scanning Probe Methods VI
|
Applied Scanning Probe Methods VII
|
ARBURG Practical Guide to Injection Moulding
|
ASM Handbook Volume 01: Properties and Selection: Irons, Steels, and High-Performance Alloys
|
ASM Handbook Volume 02: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials
|
ASM Handbook Volume 03: Alloy Phase Diagrams
|
ASM Handbook Volume 04: Heat Treating
|
ASM Handbook Volume 05: Surface Engineering
|
ASM Handbook Volume 06: Welding, Brazing, and Soldering
|
ASM Handbook Volume 07: Powder Metal Technologies and Applications
|
ASM Handbook Volume 08: Mechanical Testing and Evaluation
|
ASM Handbook Volume 10: Materials Characterization
|
ASM Handbook Volume 11: Failure Analysis and Prevention
|
ASM Handbook Volume 12: Fractography
|
ASM Handbook Volume 13A: Corrosion: Fundamentals, Testing, and Protection
|
ASM Handbook Volume 13B Corrosion: Materials
|
ASM Handbook Volume 13C: Corrosion: Environments and Industries
|
ASM Handbook Volume 14: Forming and Forging
|
ASM Handbook Volume 14A: Metalworking: Bulk Forming
|
ASM Handbook Volume 14B: Metalworking: Sheet Forming
|
ASM Handbook Volume 15: Casting
|
ASM Handbook Volume 16: Machining
|
ASM Handbook Volume 17: Nondestructive Evaluation and Quality Control
|
ASM Handbook Volume 18: Friction, Lubrication, and Wear Technology
|
ASM Handbook Volume 19: Fatigue And Fracture
|
ASM Handbook Volume 20: Materials Selection and Design
|
ASM Handbook Volume 21: Composites
|
ASM Handbook Volume 9: Metallography and Microstructures
|
ASM Materials Engineering Dictionary
|
ASM Metals Reference Book, 3rd Edition
|
ASM Specialty Handbook: Aluminum and Aluminum Alloys
|
ASM Specialty Handbook: Carbon and Alloy Steels
|
ASM Specialty Handbook: Cast Irons
|
ASM Specialty Handbook: Copper and Copper Alloys
|
ASM Specialty Handbook: Heat-Resistant Materials
|
ASM Specialty Handbook: Magnesium and Magnesium Alloys
|
ASM Specialty Handbook: Nickel, Cobalt, and Their Alloys
|
ASM Specialty Handbook: Stainless Steels
|
ASM Specialty Handbook:Tool Materials
|
Assessing Food Safety of Polymer Packaging
|
Atlas of Crystal Structure Types for Intermetallic Phases
|
Atlas of Fatigue Curves
|
Atlas of Time-Temperature Diagrams for Irons and Steels
|
Basic Electromagnetism and Materials
|
Binary Alloy Phase Diagrams, 2nd Edition
|
Bio-Based Polymers and Composites
|
Biocides in Plastics
|
Biodegradable Polymers
|
Biomaterials Science : An Introduction to Materials in Medicine, 2nd Edition
|
Biomedical Nanostructures
|
Biomedical Surfaces
|
BioMEMS and Biomedical Nanotechnology
|
Brazing, 2nd Edition
|
Carbon and Alloy Steels
|
Carburizing: Microstructures and Properties
|
Casting
|
Cellular Polymers
|
Ceramic Materials: Processes, Properties, and Applications
|
Ceramic Processing
|
Ceramography: Preparation and Analysis of Ceramic Microstructures
|
Characterization and Failure Analysis of Plastics
|
Characterization II
|
Characterization, Design, and Processing of Nanosize Powders and Nanostructured Materials
|
Chemistry and Technology of Polyols for Polyurethanes
|
Clay Swelling and Colloid Stability
|
Composite Materials: Design and Applications, Second Edition
|
Composites
|
Comprehensive Index to ASM Handbooks
|
Computational Materials Engineering - An Introduction to Microstructure Evolution
|
Computational Mesomechanics of Composites: Numerical Analysis of the Effect of Microstructures of Composites of Strength and Damage Resistance
|
Computer Simulations in Condensed Matter Systems: From Materials to Chemical Biology. Volume 2
|
Computer Simulations in Condensed Matter: Systems: From Materials to Chemical Biology. Volume 1
|
Conjugated Polymers: Processing and Applications
|
Conjugated Polymers: Theory, Synthesis, Properties, and Characterization
|
Copper and Copper Alloys
|
Copper: Better Properties for Innovative Products
|
Corrosion Control Through Organic Coatings
|
Corrosion Engineering Handbook, Second Edition - 3 Volume Set
|
Corrosion Engineering, Science and Technology
|
Corrosion in the Petrochemical Industry
|
Corrosion of Aluminum and Aluminum Alloys
|
Corrosion of Weldments
|
Corrosion Science and Technology, Second Edition
|
Corrosion: Fundamentals, Testing, and Protection
|
Corrosion: Understanding the Basics
|
Desk Handbook: Phase Diagrams for Binary Alloys
|
Determination of Additives in Polymers and Rubbers
|
Dynamics of Fibre Formation and Processing
|
Eco-Materials Processing and Design
|
Elasticity - Theory, Applications, and Numerics
|
Electrical Resistivity of Thin Metal Films
|
Electroactive Polymers for Robotic Applications
|
Electroceramic Materials and Applications
|
Electromagnetic Field Matter Interactions in Thermoelasic Solids and Viscous Fluids
|
Electronic Material Science and Surfaces, Interfaces, and Thin Films for Microelectronics
|
Elements of Metallurgy and Engineering Alloys
|
Energy Materials
|
Engineered Materials Handbook
|
Engineered Materials Handbook Vol. 2: Engineering Plastics
|
Engineered Materials Handbook Vol. 3: Adhesives and Sealants
|
Engineered Materials Handbook Vol. 4: Ceramics and Glasses
|
Engineering Materials 1
|
Engineering Materials 2
|
Engineering Mechanics
|
Engineers' Guide to Technical Writing
|
EU Regulation of Chemicals REACH
|
Extrusion, Second Edition
|
Failure Analysis and Prevention
|
Failure Analysis of Engineering Structures: Methodology and Case Histories
|
Failure Analysis of Heat Treated Steel Components
|
Fatigue and Durability of Structural Materials
|
Fatigue And Fracture
|
Fatigue Crack Propagation in Metals and Alloys: Microstructural Aspects and Modelling Concepts
|
Fiber-Reinforced Composites: Materials, Manufacturing, and Design, Third Edition
|
Fibre Optic Methods for Structural Health Monitoring
|
Finite Element Analysis of Composite Materials
|
Fire Properties of Polymer Composite Materials
|
Fluoroplastics
|
Forming and Forging
|
Fractography
|
Friction Stir Welding and Processing
|
Friction, Lubrication, and Wear Technology
|
From Microphysics to Macrophysics
|
Fundamentals of Electrochemical Corrosion
|
Fundamentals of Friction and Wear
|
Gear Materials, Properties, and Manufacture
|
Global Roadmap for Ceramics and Glass Technology
|
Handbook of Biodegradable Polymers
|
Handbook of Conducting Polymers, Third Edition - 2 Volume Set
|
Handbook of Corrosion Data, 2nd Edition
|
Handbook of Industrial Drying, Third Edition
|
Handbook of Lapping and Polishing
|
Handbook of Magnetism and Advanced Magnetic Materials, 5 Vol Set
|
Handbook of Materials for Medical Devices
|
Handbook of Non-Ferrous Metal Powders - Technologies and Applications
|
Handbook of Plastic Films
|
Handbook of Polymer Foams
|
Handbook of Polymer Testing - Short-Term Mechanical Tests
|
Handbook of Residual Stress and Deformation of Steel
|
Handbook of Rubber Bonding
|
Handbook of Semiconductor Interconnection Technology, Second Edition
|
Handbook of Specialty Elastomers
|
Handbook of Ternary Alloy Phase Diagrams (10 Volume Set)
|
Handbook of Thermal Spray Technology
|
Handbook of Workability and Process Design
|
Heat Treater's Guide (2 Volume Set)
|
Heat Treater's Guide: Practices and Procedures for Irons and Steels, 2nd Edition
|
Heat Treater's Guide: Practices and Procedures for Nonferrous Alloys
|
Heat Treating
|
Heat Treatment of Gears: A Practical Guide for Engineers
|
Heat-Resistant Materials
|
High Temperature Coatings
|
High-Temperature Corrosion and Materials Applications
|
How to Organize and Run a Failure Investigation
|
Hydrogen Materials Science and Chemistry of Carbon Nanomaterials
|
Inorganic Materials Synthesis and Fabrication
|
Integral Materials Modeling: Towards Physics-Based Through-Process Models
|
Interdisciplinary Science Reviews
|
Interfacial Transport Phenomena
|
International Journal of Cast Metals Research
|
International Polymer Science and Technology
|
Introduction to Drying of Ceramics
|
Introduction to Engineering Materials, Second Edition
|
Introduction to High Temperature Oxidation and Corrosion
|
Introduction To Materials Science
|
Introduction to Plastics Recycling, 2nd Edition
|
Introduction to Polymer Science and Chemistry: A Problem Solving Approach
|
Introduction to the Principles of Materials Evaluation
|
Ironmaking & Steelmaking: Processes, Products and Applications
|
ISTFA 2005: International Symposium for Testing and Failure Analysis (Book and CD-ROM)
|
Journal of the Energy Institute
|
Laser Processing of Engineering Materials - Principles, Procedure and Industrial Application
|
Lead-Free Solder Interconnect Reliability
|
Light Alloys, 4th Edition - From Traditional Alloys to Nanocrystals
|
Light Microscopy of Carbon Steels
|
Light Scattering in Solids IX
|
Liquid Phase Epitaxy of Electronic, Optical and Optoelectronic Materials
|
Low-Dimensional Molecular Metals
|
Machining
|
Magnesium and Magnesium Alloys
|
Magnetic Nanostructures
|
Magnetoscience
|
Material Properties Under Intensive Dynamic Loading
|
Materials - Engineering, Science, Processing and Design
|
Materials and Design
|
Materials Characterization
|
Materials for Engineers and Technicians
|
Materials for the Hydrogen Economy
|
Materials Processing and Manufacturing Science
|
Materials Processing During Casting
|
Materials Processing Handbook
|
Materials Properties Handbook: Titanium Alloys
|
Materials Research Innovations
|
Materials Science and Technology
|
Materials Selection and Design
|
Materials Selection in Mechanical Design
|
Materials Technology: Advanced Performance Materials
|
Mathematical Methods for Engineers and Scientists 1
|
Mathematical Methods for Engineers and Scientists 2
|
Mathematical Methods for Engineers and Scientists 3
|
Mechanical Properties and Performance of Engineering Ceramics II
|
Mechanical Testing and Evaluation
|
Mechanics and Mechanisms of Fracture: An Introduction
|
Medical Device Materials II (Proceedings of Materials and Processes for Medical Devices 2004)
|
Metallographer's Guide: Practices and Procedures for Irons and Steels
|
Metallographic Polishing by Mechanical Methods, 4th Edition
|
Metallography and Microstructures
|
Metallography: Principles and Practice
|
Metallurgy for the Non-Metallurgist
|
Metals Handbook Desk Edition
|
Microwaves and Metals
|
Modern Ceramic Engineering: Properties, Processing, and Use in Design, Third Edition
|
Nanobiotechnology of Biomimetic Membranes
|
Nanocatalysis
|
Nanoethics: The Ethical and Social Implications of Nanotechnology
|
Nanofluids: Science and Technology
|
Nanoparticles and Occupational Health
|
Nanoscale: Issues and Perspectives for the Nano Century
|
Nanostructured Coatings
|
Nanostructures - Fabrication and Analysis
|
Nanotechnology for Electronic Materials and Devices
|
Nanotechnology in Catalysis 3
|
Nanotechnology: Societal Implications
|
Nickel, Cobalt, and Their Alloys
|
Nondestructive Evaluation and Quality Control
|
Nondestructive Testing
|
Optical Data Storage
|
Optically Anomalous Crystals
|
Organic Crystals, Liquid Crystals and Polymers
|
Packaging, Transport, Storage & Security of Radioactive Material
|
Paint Technology Handbook
|
Pearson's Handbook Desk Edition
|
Photon-based Nanoscience and Nanobiotechnology
|
Physical Properties of Polymers Handbook
|
Physics of Surfaces and Interfaces
|
Plastics Additives
|
Plastics Technology Handbook, Fourth Edition
|
Plastics, 3rd Edition - Microstructure and Engineering Applications
|
Plastics, Rubber and Composites: Macromolecular Engineering
|
Plastics, Rubber and Health
|
Polymer Foams Handbook
|
Polymer Reference Book
|
Polymeric Foams: Science and Technology
|
Polymers and Polymer Composites
|
Polymers for Dental and Orthopedic Applications
|
Polymers in Cementitious Materials
|
Polymers in Construction
|
Polymers in Electronics
|
Polyurethane and Related Foams: Chemistry and Technology
|
Powder Metal Technologies and Applications
|
Powder Metallurgy Stainless Steels: Processing, Microstructures, and Properties
|
Powder Technology Handbook, Third Edition
|
Practical Guide to Blow Moulding
|
Practical Guide to Polyethylene
|
Practical Guide to Polypropylene
|
Practical Guide to Polyvinyl Chloride
|
Practical Guide to Rotational Moulding
|
Practical Heat Treating: Second Edition
|
Practical Induction Heat Treating
|
Practical Nitriding and Ferritic Nitrocarburizing
|
Principles of Brazing
|
Principles of Composite Material Mechanics, Second Edition
|
Principles of Corrosion Engineering and Corrosion Control
|
Principles of Soldering
|
Proceedings of the 6th Pacific Rim Conference on Glass and Ceramic Technology
|
Progress in Rubber, Plastics and Recycling Technology
|
Progress in Understanding of Polymer Crystallization
|
Properties and Selection: Irons, Steels, and High-Performance Alloys
|
Properties and Selection: Nonferrous Alloys and Special-Purpose Materials
|
Properties of Aluminum Alloys: Fatigue Data and Effects of Temperature, Product Form, and Process Variables
|
Properties of Aluminum Alloys: Tensile, Creep and Fatigue Data at High and Low Temperatures
|
Protective Coatings for Turbine Blades
|
Reliability and Failure of Electronic Materials and Devices
|
Reliability of MEMS
|
Reliability-based Structural Design
|
Rubber Technologist’s Handbook
|
Scanning Microscopy for Nanotechnology
|
Scanning Probe Microscopy
|
Science and Technology of Rubber, 3rd Edition
|
Science of Microscopy
|
Semiconductor Optics
|
Shock and Damage Models in Reliability Theory
|
Sintering of Ceramics
|
Springer Handbook of Electronic and Photonic Materials
|
Springer Handbook of Materials Measurement Methods
|
Springer Handbook of Nanotechnology
|
Stahlschlussel (Key to Steel), 20th Edition
|
Steel Castings Handbook, 6th Edition
|
Steel Heat Treatment Handbook, Second Edition - 2 Volume Set
|
Steel Metallurgy for the Non-Metallurgist
|
Steels: Microstructure and Properties, 3rd Edition
|
Steels: Processing, Structure, and Performance
|
Stress-Corrosion Cracking: Materials Performance and Evaluation
|
Structure, Deformation, and Integrity of Materials 2 Vol Set
|
Superalloys: A Technical Guide, 2nd Edition
|
Surface Engineering
|
Surface Engineering for Corrosion and Wear Resistance
|
Surface Hardening of Steels: Understanding the Basics
|
Systems with Hysteresis: Analysis, Identification and Control Using the Bouc-Wen Model
|
Tensile Testing, 2nd Edition
|
The Mould Design Guide
|
The Surface Treatment and Finishing of Aluminum and Its Alloys, 6th Edition
|
Theory of Defects in Semiconductors
|
Thermal Degradation of Polymeric Materials
|
Thermoplastics and Thermoplastic Composites
|
Thin Film Solar Cells: Fabrication, Characterization and Applications
|
Titanium Alloys: An Atlas of Structures and Fracture Features
|
Titanium: A Technical Guide, 2nd Edition
|
Transactions of the Institute of Metal Finishing
|
Tribology - Materials, Surfaces & Interfaces
|
Understanding How Components Fail, 2nd Edition
|
Weld Integrity and Performance
|
Welding, Brazing, and Soldering
|
Woldman's Engineering Alloys, 9th Edition
|
Worldwide Guide to Equivalent Irons and Steels, 5th Edition
|
Worldwide Guide to Equivalent Nonferrous Metals & Alloys, 4th Edition
|
