Insights from industry

A Technology-Based Total Solution for X-Ray NDT: From Source to Sensor

insights from industrySara ZilianiSales Engineer Hamamatsu Photonics

In this interview, AZoMaterials speaks with Sara Ziliani, PhD, Sales Engineer at Hamamatsu Photonics Italia, about a technology-based total solution for X-ray NDT and how optimizing the complete imaging chain can improve resolution, speed, scalability, and image quality in industrial inspection.

Can you please introduce yourself and your role at Hamamatsu Photonics?

My name is Sara Ziliani, and I am a Sales Engineer at Hamamatsu Photonics in the Italian office. I have been at the company since 2022, and I am responsible for industrial X-ray non-destructive testing, agri-sorting with infrared technologies, and radiation monitoring markets.

Before joining Hamamatsu, I completed a PhD in nuclear physics, where my project focused on gamma-ray spectroscopy and radiation detectors. That background is closely connected to my work today because X-ray NDT depends on understanding both radiation generation and detection, as well as how the complete imaging system influences the final result.

What do you mean by a technology-based total solution for X-ray NDT?

The key idea is that X-ray non-destructive testing performance cannot be optimized one component at a time. Rather, optimization has to be integrated across the complete imaging chain.

An X-ray image starts with the generation of X-rays. Those X-rays interact with the object, where they can be transmitted, absorbed, or scattered. The transmitted X-rays then reach the detector, where they are converted into a signal. After that, there is signal readout and image processing. Each of these stages influences the final image.

Hamamatsu is a component provider rather than a manufacturer of complete inspection cabinets or a system integrator. Our role is to support system integrators with key technologies across the imaging chain and help them select the source, detector, and associated technologies coherently for the specific inspection need. That broader approach is what we mean by a technology-based total solution.

Why is X-ray NDT becoming more challenging for industrial applications?

In many applications, X-ray NDT is becoming more challenging because we are being asked to detect smaller defects, inspect more complex objects, achieve higher resolutions, work in noisy environments, and accommodate different geometries and object sizes.

The difficulty is that these parameters are interconnected. If you increase resolution, for example, you can lose signal. If you increase speed, noise can also increase. If you increase the size of the object, the geometry of the system changes.

This means you cannot simply maximize every specification at once. The real challenge is therefore to find the right balance for the inspection objective rather than focusing on one specification in isolation.

How can X-ray systems achieve the high resolution required to detect increasingly small defects?

High-resolution X-ray inspection is important in applications such as lithium-ion battery inspection, where you may need to measure the overhang between the anode and cathode, and printed circuit board inspection, where you may be looking for cracks, voids, missing bonding wires or defects in soldering.

It is also relevant to the inspection of complex materials, including die-cast components used in automotive and aerospace applications.

What is important is that high resolution does not depend only on having the smallest focal spot or the smallest detector pixel. You have to consider the combination of the source, detector, and system geometry.

One of the key technologies here is the microfocus X-ray source. The focal spot is the point from which X-rays are emitted, and with microfocus technology, this can be on the order of tens of microns or even sub-micron scale. A small focal spot helps maintain sharp edges and reduces the penumbra that occurs with a larger, non-point-like source.

Hamamatsu has more than 30 years of experience producing microfocus X-ray sources and provides both sealed- and open-type technologies. The appropriate choice depends on the requirements of the inspection system.

How do the source, detector and imaging geometry work together to determine resolution?

There are three useful concepts to consider: focal spot size, geometric magnification, and detector pixel size.

The focal spot determines the effective point from which the X-rays are emitted. Geometric magnification describes how large the object appears on the detector, while pixel size determines the detector's ability to resolve fine details.

The important point is that these cannot be considered independently. You can have an excellent source with a very small focal spot, but if the detector or geometry is not correctly matched, the final image can still be limited. Likewise, simply selecting a detector with very small pixels does not automatically guarantee the best resolution.

For this reason, high-resolution inspection is already a system-level topic from the beginning. The source, detector, and geometry have to be selected together according to the dimensions of the defect that you need to identify.

Speed is another major challenge in industrial inspection. How can X-ray NDT maintain image quality while increasing throughput?

Speed is particularly important when X-ray inspection moves from laboratory analysis into industrial production. The system has to inspect products at a rate compatible with the production process while still providing sufficient image quality to identify the required defects.

This is where technologies such as TDI-CMOS line-scan cameras become useful. Time-delay integration allows signals to be accumulated as an object moves through the inspection system, enabling the combination of sensitivity with the speed required for continuous inspection.

Again, there is a challenge. Increasing speed can reduce the available signal and increase the influence of noise, so detector technology must be matched to the X-ray source and inspection geometry. The objective is not simply to make the acquisition as fast as possible, but to achieve the throughput required by the application without losing the information needed for reliable inspection.

How does scalability influence detector selection for larger or more complex objects?

Not every inspection involves a small object or a fixed field of view. Applications such as materials inspection, food inspection, and security screening can require much larger detection areas.

Scalability therefore becomes another important part of system design. Detector architectures need to be adapted to the object's dimensions and to how it moves through the inspection system. Technologies such as photodiode arrays and scalable detector configurations can be used to address larger inspection widths and different system geometries.

The important point is that scaling the detector area also affects other parameters. You still need to consider resolution, signal, speed, and the characteristics of the X-ray source. A scalable solution needs to preserve the required inspection performance rather than simply increasing the physical detection area.

What role can AI denoising play in improving X-ray image quality?

Noise is a major limitation in X-ray imaging because it can make small defects or contaminants more difficult to distinguish from the background. This becomes particularly important when we increase inspection speed or work under conditions where the available signal is limited.

AI denoising provides another way to improve the image. Hamamatsu has developed a denoising approach based on deep learning that can distinguish structural information in an X-ray image from noise.

The objective is not to replace the imaging system's physics. We still need to optimize the source, detector, and geometry. Instead, AI becomes another part of the imaging chain that can help extract clearer information from the acquired data.

This is particularly valuable because image quality ultimately determines whether the feature or defect we are interested in can actually be detected. By combining suitable hardware with advanced processing, we can improve the usability of X-ray images while maintaining the inspection objective.

Which applications can benefit most from this complete approach to X-ray NDT?

There is a very broad range of applications. For example, in electronics, we can inspect printed circuit boards for cracks, voids, soldering defects, and missing bonding wires. In lithium-ion batteries, X-ray inspection can be used to examine fine internal structures and measurements such as electrode overhang.

Materials inspection is another important area, including die-cast components for automotive and aerospace applications. These objects can be complex and may require both high penetration and fine defect detection.

The same imaging-chain approach also applies to food inspection and security screening, where speed and scalability become especially important because products or baggage may be moving continuously through the system.

Although these applications are very different, the principle is the same. First, define what you need to detect, then select the appropriate combination of X-ray generation, detection, geometry, and image processing to achieve that objective.

What should engineers and system integrators consider when designing their next X-ray NDT system?

I think the main message is not to begin by asking which individual component has the highest specification. Instead, start from the inspection objective.

You need to consider the size of the defect you want to detect, the material and dimensions of the object, the required inspection speed, the system geometry, and the image quality you need. From there, you can select the source, detector and processing technology as a coherent imaging chain.

There is always a balance between resolution, speed, scalability, and image quality. A very high-performance component cannot compensate for another part of the system that is incorrectly matched.

For us, this is the value of looking at X-ray NDT as a technology-based total solution. By considering the complete imaging chain from source to sensor and through to image processing, system integrators can make better technology choices for the specific inspection challenge.

About Sara Ziliani, PhD

Sara Ziliani, PhD, is a Sales Engineer at Hamamatsu Photonics, where she works across industrial applications including X-ray non-destructive testing, agri-sorting using infrared technologies and radiation monitoring. She joined in 2022, bringing a research background in nuclear physics, gamma-ray spectroscopy and radiation detector technologies.

Dr. Ziliani studied at the University of Milan, completing both undergraduate and postgraduate research in nuclear physics. Her bachelor's research examined femtosecond nuclear lifetimes using the gamma-ray-induced Doppler shift attenuation method, while her master's research focused on lifetime measurements of excited states in neutron-rich carbon and oxygen isotopes.

She subsequently completed a PhD through the University of Milan's School of Physics, Astrophysics and Applied Physics. Her doctoral thesis, "Comprehensive Investigation of Light Neutron-Rich Nuclei to Test Modern Nuclear Theoretical Models," investigated neutron-rich nuclei using advanced experimental techniques and detection systems. The thesis later received a special mention in the 2022 Claudio Villi Award for nuclear physics.

This combination of academic expertise in nuclear physics and practical experience with radiation detection supports her current work helping industrial customers and system integrators address X-ray inspection challenges across the complete imaging chain.

This information has been sourced, reviewed, and adapted from materials provided by Hamamatsu Photonics Europe.

For more information on this source, please visit Hamamatsu Photonics Europe.

Disclaimer: The views expressed here are those of the interviewee and do not necessarily represent the views of AZoM.com Limited (T/A) AZoNetwork, the owner and operator of this website. This disclaimer forms part of the Terms and Conditions of use of this website.

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Hamamatsu Photonics Europe. (2026, November 16). A Technology-Based Total Solution for X-Ray NDT: From Source to Sensor. AZoM. Retrieved on November 16, 2026 from https://www.azom.com/article.aspx?ArticleID=25563.

  • MLA

    Hamamatsu Photonics Europe. "A Technology-Based Total Solution for X-Ray NDT: From Source to Sensor". AZoM. 16 November 2026. <https://www.azom.com/article.aspx?ArticleID=25563>.

  • Chicago

    Hamamatsu Photonics Europe. "A Technology-Based Total Solution for X-Ray NDT: From Source to Sensor". AZoM. https://www.azom.com/article.aspx?ArticleID=25563. (accessed November 16, 2026).

  • Harvard

    Hamamatsu Photonics Europe. 2026. A Technology-Based Total Solution for X-Ray NDT: From Source to Sensor. AZoM, viewed 16 November 2026, https://www.azom.com/article.aspx?ArticleID=25563.

Ask A Question

Do you have a question you'd like to ask regarding this article?

Leave your feedback
Your comment type
Submit

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.