3D Printing News

RSS

New 3D Printed Thermoelectric Device to Efficiently Convert Heat into Electric Power

Researchers from Swansea University’s SPECIFIC Innovation and Knowledge Centre have developed a new 3D printed thermoelectric device, which turns heat into electric power with an efficiency factor of more than 50% higher than the earlier best for printed materials. Furthermore, it is economical to mass produce.

6 Jun 2019

RDAbbott Showcased Production-ready L280 LAM 3D Printer at RAPID + TCT 2019

RDAbbott demonstrated a revolutionary L280 LAM 3D printer in The Dow Chemical Company booth #1673 at RAPID + TCT 2019.

From R.D. Abbott Company, Inc. 31 May 2019

AFRL Develops 3-D Printed Polymer-based Foam Structure to Localize Shock Wave

Through an Air Force Office of Scientific Research-funded basic research effort, the collaborative team developed a 3-D printed polymer-based foam structure that responds to the force of a shock wave to act as a one-way switch, a long sought-after goal in shock research.

31 May 2019

Creaform HandySCAN 3D Scanner Meets Boeing’s Requirements

Creaform, the worldwide leader in portable 3D measurement solutions and non-destructive testing (NDT) solutions, announced today that its HandySCAN 3D™ metrology-grade 3D laser scanner can now be used for recording physical attributes of aircraft dents and blends on all models of Boeing commercial airplanes.

From Creaform Inc. 30 May 2019

New Tech. to Functionalize 3D-Printable Polymers for Flexible & Transparent Electronics

A research cooperation between the University of Hamburg and DESY has developed a process suitable for 3D printing that can be used to produce transparent and mechanically flexible electronic circuits.

24 May 2019

New 3D-Printed Technology Reduces Cost of ELISA Medical Test

A wish for a simpler, economical way to conduct standard laboratory tests for medical diagnoses and to escape “washing the dishes” led University of Connecticut scientists to create a new technology that decreases cost and time.

23 May 2019

3D-Printed Device Detects Biomarkers of Preterm Birth

Preterm birth (PTB) –– defined as birth before the 37th week of gestation –– is the leading complication of pregnancy.

23 May 2019

Scientists Design 3D-Printed Microchip Electrophoresis Device for Detecting Preterm Birth Biomarkers

A major complication of pregnancy is preterm birth (PTB), which is defined as birth before the 37th week of gestation.

23 May 2019

Lubrizol Partners with Ultimaker to Develop Unique TPU Range for 3D Printing

The Lubrizol Corporation announces a collaboration with Ultimaker, the leader in desktop 3D printing, to enter the Material Alliance Program.

From The Lubrizol Corporation 18 May 2019

Hyperelastic Bone Produced by 3D Printing Could be Effective for Fixing Skull Defects

Defects of the facial bones and skull are found to be the major challenges for plastic and reconstructive surgeons.

17 May 2019

Editorial Highlights

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

3D Printing News

New 3D Printed Thermoelectric Device to Efficiently Convert Heat into Electric Power

RDAbbott Showcased Production-ready L280 LAM 3D Printer at RAPID + TCT 2019

AFRL Develops 3-D Printed Polymer-based Foam Structure to Localize Shock Wave

Creaform HandySCAN 3D Scanner Meets Boeing’s Requirements

New Tech. to Functionalize 3D-Printable Polymers for Flexible & Transparent Electronics

New 3D-Printed Technology Reduces Cost of ELISA Medical Test

3D-Printed Device Detects Biomarkers of Preterm Birth

Scientists Design 3D-Printed Microchip Electrophoresis Device for Detecting Preterm Birth Biomarkers

Lubrizol Partners with Ultimaker to Develop Unique TPU Range for 3D Printing

Hyperelastic Bone Produced by 3D Printing Could be Effective for Fixing Skull Defects

How can Charge Photometry be Used for Battery Screening and Development?

Comparing Computed Radiography and Digital Detector Arrays

How the RSC is Empowering the Future of Chemical Sciences

Peel Fixtures and Equipment

HMK-CD4 Nano Particle Size Analyzer

Defender™ Omega Handheld Raman Analyzer

Sponsored Content

Choosing the Right Nutsche Filter Dryer: Five Things to Consider

Choosing the Ideal Automotive Bonding Tape: Testing Methods for Optimal Performance

The Characterization of Additive Manufacturing Powders

VOCs and SVOCs - How to Achieve Cleaner Air

Editorial Highlights

The Current State of the Global Semiconductor Market

How are Graphene Batteries Made?

What Role Will The IoT Play In The Electric Vehicle Industry?

3D Printing News

How can Charge Photometry be Used for Battery Screening and Development?

Comparing Computed Radiography and Digital Detector Arrays

How the RSC is Empowering the Future of Chemical Sciences

1New Electrolyte Improves Battery Production and Recycling

2New Smart Adhesive with Unmatched Strength and Versatility

3Longer-Lasting Catalyst Boosts Hydrogen Production

4New Solid-State Electrolyte Increases the Affordability of Green Energy Storage

5Max Space Utilizes ALUULA Material for Space Habitat Construction

6New Tech Makes Gold Recovery from E-waste Easier and Greener

Sponsored Content

Editorial Highlights