Epoxy, Silicone, Polyurethane, Polysulfide, Cyanoacrylate and UV Cure Systems for the Electronics Industry

Master Bond Inc. formulates a wide range of epoxy, silicone, polyurethane, polysulfide, cyanoacrylate and UV cure systems for manufacturers of electrical devices. Our compounds are designed to increase productivity, save energy, improve product performance properties and reliability.

Specific Master Bond grades offer:

  • Improved durability
  • High and low temperature serviceability
  • Excellent adhesion
  • Resistance to vibration, impact, shock and thermal cycling
  • Withstand exposure to a wide range of chemicals and water
  • Superior electrical insulation properties
  • Comply with UL94V-0 flame retardant specification
  • Thermal and electrical conductivity
  • Ambient, elevated temperature or UV cures
  • NASA low outgassing approved

Master Bond Epoxy, Silicone, Polyurethane, Polysulfide, Cyanoacrylate and UV Cure Systems

The following table summarizes Master Bond's range of epoxy, silicone, polyurethane, polysulfide, cyanoacrylate and UV cure systems.

Product Description
FL901S Heat cured film adhesive with low volume resistivity. Bonds well to metals and high temperature plastics. Service temperature range of -100ºF to 400ºF. Standard size is .003 thick x 2 inches wide x 6 inches long. Die cuts available
SUPREME 10HT/S One part, heat cured structural epoxy with long working life. Excellent shear and peel strength. Cryogenically serviceable down to 4K. Heat resistant to 400ºF. Screen printable. Low volume resistivity of <103 ohm-cm.
EP21HT Two component, room temp curing adhesive, sealant and coating. Volume resistivity of 1014 ohm/cm. Dielectric constant of 2.90. Excellent insulation and a one-to-one mix ratio. High mechanical strength properties. Tensile lap shear aluminum to aluminum, 3200 PSI at 75ºF.

Applications of Epoxy, Silicone, Polyurethane, Polysulfide, Cyanoacrylate and UV Cure Systems

Typical applications of Master Bond's range of epoxy, silicone, polyurethane, polysulfide, cyanoacrylate and UV cure systems include:

  • Line voltage regulators
  • Electronic meters
  • Transformers
  • Voltage regulators
  • Armature relays
  • Crane and hoist controls
  • Electromagnetic brakes and clutches
  • Industrial controls
  • Motor starters, contactors, and controllers
  • Numerical controls
  • Relays
  • Solenoid switches
  • Electrical motor assembly
  • Circuit breakers
  • Electric power distribution apparatus
  • Fuse clips and blocks
  • Generator control and metering panels
  • Power connectors
  • Electrical switchgear apparatus
  • Torque motors
  • Specialty battery chargers
  • Capacitors
  • Condensers
  • Rectifiers
  • Thermoelectric generators
  • Signaling apparatus
  • Intercommunication equipment
  • Accelerating waveguide structures
  • Particle accelerators

Customized Packaging to Customer Specifications

Master Bond offers a wide array of packaging options to speed productivity, minimize waste and save energy including...

  • Quantities from grams to gallons
  • Cans, bottles and jars
  • Cartridges for manual and pneumatic guns
  • Premixed and frozen syringes
  • Bipaks for field service kits

New Epoxy, Silicone, Polyurethane, Polysulfide, Cyanoacrylate and UV Cure Systems Developed by Master Bond

Master Bond has recently introduced several new epoxy, silicone, polyurethane, polysulfide, cyanoacrylate and UV cure systems. These include:

Product Description
Supreme 46HT-2 High temperature resistant epoxy adhesive resists exposure up to 500°F/ Has high bond strength and superior toughness. Excellent electrical insulation properties.
EP21AN Thermally conductive, electrically insulative epoxy has convenient, non-critical one to one mix ratio. Dielectric strength > 400 volts/mil. Thermal conductivity is 22 BTU/in/ft2/hr/°F. High dimensional stability.
EP30HT Medium viscosity, two component epoxy adhesive cures at room temperature. Temperature resistance up to 400°F. Superb optical clarity and electrical insulation properties.
EP24 Fast curing, one to one mix ratio epoxy adhesive. Bonds well to similar and dissimilar substrates. Superior chemical resistance. Will cure at colder temperatures.

Electronic Grade Polymers for Electronic Manufacturing by Master Bond

Master Bond’s line of microelectronic formulations consists of epoxies, silicones, polyurethanes, acrylics and latex solutions. They include electrically insulative, thermally conductive and electrically conductive systems. Both one and two component compounds are available for use. These products are currently employed in applications ranging from heat sinking to glob tops to surface mounting. Many of these compounds have unique properties such as low thermal expansion coefficients, exceptionally high thermal conductivity, low stress, etc. Master Bond is also actively engaged in developing new products to keep pace with the rapid technological advancements in the microelectronic industry ranging from flip-chip technology to advanced die-attach processes.

Master Bond offers specialty systems for computers, telecommunications devices, audio/video devices, avionics and aerospace applications, as well as automotive manufacturing, interactive circuitry and advanced semiconductor equipment.

This information has been sourced, reviewed and adapted from materials provided by Master Bond Inc.

For more information on this source, please visit Master Bond Inc.

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Master Bond Inc.. (2019, April 30). Epoxy, Silicone, Polyurethane, Polysulfide, Cyanoacrylate and UV Cure Systems for the Electronics Industry. AZoM. Retrieved on February 24, 2020 from https://www.azom.com/article.aspx?ArticleID=5601.

  • MLA

    Master Bond Inc.. "Epoxy, Silicone, Polyurethane, Polysulfide, Cyanoacrylate and UV Cure Systems for the Electronics Industry". AZoM. 24 February 2020. <https://www.azom.com/article.aspx?ArticleID=5601>.

  • Chicago

    Master Bond Inc.. "Epoxy, Silicone, Polyurethane, Polysulfide, Cyanoacrylate and UV Cure Systems for the Electronics Industry". AZoM. https://www.azom.com/article.aspx?ArticleID=5601. (accessed February 24, 2020).

  • Harvard

    Master Bond Inc.. 2019. Epoxy, Silicone, Polyurethane, Polysulfide, Cyanoacrylate and UV Cure Systems for the Electronics Industry. AZoM, viewed 24 February 2020, https://www.azom.com/article.aspx?ArticleID=5601.

Ask A Question

Do you have a question you'd like to ask regarding this article?

Leave your feedback
Submit