Interviews

Insights from industry

Interviews with leaders in their field at the cutting edge of the materials industry.

View Articles

Thought Leaders

Ayres Hall - a landmark building at the University of Tennessee

Covering the key areas where materials are and will make an impact.

View Articles

All Recent Interviews

Force Testing - A Versatile and Intuitive Force Tester for Production Environments

AZoM spoke to Joel Schoubert, a product manager at Ametek, about the versatility of the CS Series and the wide range of production applications that it can be used in.

From Lloyd Instruments Ltd. 4 Jan 2017

Should you Measure Battery Conductance or Resistance to Monitor Battery Health?

AZoM spoke to Wayne Eaton, of Storage Battery Systems (SBS), about the advantages of measuring resistance, rather than conductance, and the benefits of using SBS equipment for resistance measurement.

From Exponential Power 22 Dec 2016

The Rapid Evolution of XRD

Harald van Weeren, product manager Aeris, Panalytical B.V., talks to AZoM about the rapid evolution of XRD and the benefits the new Aeris system offers to market.

From Malvern Panalytical 8 Dec 2016

Why Choose TGA-GCMS Over Other Options for Evolved Gas Analysis?

Noah Menard, Laboratory Manager for Veritas Testing and Consulting, talks to AZoM about the TGA/DSC 3+ system from Mettler Toledo.

From Mettler Toledo - Thermal Analysis 29 Nov 2016

Conductive Additives - Using Carbon Nanotubes to Increase the Electrical Conductivity of Polymer Composites

AZoM spoke to Zakhar Bolshakov, of OCSiAl, about a novel SWCNT additive solution, TUBALL, that they have developed. TUBALL promises to make the addition of SWCNTs to polymer composites as simple and effective as possible.

From OCSIAL Group 28 Nov 2016

Rheological Techniques for Improved Powder Measurements

Denis Schütz, Lead Scientist Powder Flow for Anton Paar, talks to AZoM about the importance of measuring powder flow and how the MCR powder rheometer from Anton Paar is ideally suited for various powder measurement applications.

By Stuart Milne 24 Nov 2016

Hot Zones - Choosing the Right Hot Zone for Your Application

AZoM spoke to Bernd Kleinpass and Peter Mallaun of Plansee about the important differences between hot zones that purchasers should be aware of, the new range of hot zones they have developed, and which will best suit your needs.

From PLANSEE 14 Nov 2016

Continuous Fully Automated On-Line XRF Analysis

Shayne Harrel, Application Development Scientist specializing in XRF for Olympus, talks to AZoM about the FOX-IQ factory on-line XRF spectrometer and the analytical power it offers manufacturers for precise quality control.

From Evident Corporation (XRF / XRD) 11 Nov 2016

Generating Surface Charge and Zeta Potential Information with Real Life Samples

Vinod Radhakrishnan, Senior Product Specialist for the Particle and Material Characterization group at Anton Paar USA, talks to AZoM about the new SurPASS 3 and how it enables users to generate surface charge and zeta potential information with real life samples.

By Stuart Milne 24 Oct 2016

HPLC Separations with Sharper Peaks - Remote UV Detection

AZoM spoke to Kate Monks, a product manager at KNAUER about their external flow cells, the different types of experiments they facilitate and the range of detectors that they offer.

From KNAUER Wissenschaftliche Geräte GmbH 13 Oct 2016

See All Materials Articles >

Editorial Highlights

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

Interviews

Insights from industry

Thought Leaders

All Recent Interviews

Force Testing - A Versatile and Intuitive Force Tester for Production Environments

Should you Measure Battery Conductance or Resistance to Monitor Battery Health?

The Rapid Evolution of XRD

Why Choose TGA-GCMS Over Other Options for Evolved Gas Analysis?

Conductive Additives - Using Carbon Nanotubes to Increase the Electrical Conductivity of Polymer Composites

Rheological Techniques for Improved Powder Measurements

Hot Zones - Choosing the Right Hot Zone for Your Application

Continuous Fully Automated On-Line XRF Analysis

Generating Surface Charge and Zeta Potential Information with Real Life Samples

HPLC Separations with Sharper Peaks - Remote UV Detection

A New Approach to Flash Point Testing

How to Use AFM to Study 2D Materials and Superlattices

How are Fine Ceramics Supporting the Next Generation of Renewable Energy?

Benchtop micro-XRF System for the Elemental Analysis of Samples

Advanced Masterbatch and Compounding for Polymers and Plastics

AirBreather Platform for Continuous Gas Analysis

Sponsored Content

Ethylene Oxide Regulations: How Changes Might Play Out Under New Administration

How the Technician Shortage is Slowing Industry Expansion

Leveraging Coriolis Flow Meters for Accurate Mass Flow and Density

The Ultimate Guide to PPE for Rescue and Recovery Missions

Editorial Highlights

The Current State of the Global Semiconductor Market

How are Graphene Batteries Made?

What Role Will The IoT Play In The Electric Vehicle Industry?

Interviews

Insights from industry

Thought Leaders

All Recent Interviews

A New Approach to Flash Point Testing

How to Use AFM to Study 2D Materials and Superlattices

How are Fine Ceramics Supporting the Next Generation of Renewable Energy?

1Smart Coatings: Thermally Responsive Polymer Brushes for Advanced Applications

23D-Printed Organic Tissue Models Mimic Living Organs

3Pioneering Large-Scale Aluminum 3D Printing

4Upcycling LDPE: Transforming Plastic Waste into High-Value Graphite

5New Study Sheds Light on How Copper Catalysts Degrade During Artificial Photosynthesis

6Forge Nano Secures $40 M to Scale U.S. Battery Manufacturing and Commercial Semiconductor Equipment Businesses

Sponsored Content

Editorial Highlights