Acid Resistant Adhesives, Sealants and Coatings

Master Bond’s technologically advanced adhesives, sealants, and coatings offer unmatched resistance to acids. They are presently employed in chemical piping, processing equipment, and storage tanks. They provide long term resistance to a wide range of acids including, sulfuric acid, hydrofluoric acid, and phosphoric acid. Master Bond’s database of chemical immersion tests extend up to 10 years.

Specific formulations of Master Bond acid resistant compounds are custom formulated to meet unique design requirements. Grades are offered with fast cure, high temperature resistance, and electrical insulation properties. Master Bond’s products adhere to many similar and dissimilar substrates including metals, glass, ceramics, and plastics.

Epoxy Systems Provide Exceptional Acid Resistance

Specific Master Bond compounds offer resistance to:

  • Sulfuric acid
  • Hydrofluoric acid
  • Nitric acid
  • Chromic acid
  • Phosphoric acid
  • Lactic acid
  • Acetic acid
  • Citric acid

Basic Properties of Acid Resistant Adhesives

Specific Master Bond acid resistant systems are designed to meet unique performance requirements. Among the most important are:

  • Fast cures
  • Low shrinkage
  • Electrical insulation
  • Resistance to extreme temperatures
  • Non-drip application
  • Low thermal expansion
  • Abrasion resistance
  • Toughness
  • Withstand vibration and impact

Major Applications of Acid Resistant Systems

  • Battery casings
  • Protective linings
  • Battery acid storage areas
  • Laboratory table top coatings
  • Tank linings
  • Jet engine test cells
  • Severe caustic & acidic environments
  • Corrosion protective coating for interior of potable water pipelines
  • To provide excellent protection against severe corrosive attack from chemicals
  • Manufacturing plants
  • Pulp and paper plants
  • Wastewater treatment plants
  • Drum storage areas
  • Laboratories
  • Pharmaceutical production areas
  • Secondary containment pits
  • Power lines
  • Protective automotive coatings
  • Pilings, moles, locks, weirs, barrages, and other steel structures
  • Corrosion protection of steel pipelines used to transport oil, gas and water.
  • Steel Tanks
  • Protective Pipe lining
  • Heat exchangers
  • Condenser boxes
  • Components used for manufacture of acids
  • Acid dilution areas
  • Reaction vessels & equipment
  • Electroplating industry
  • Stainless steel pickling tanks
  • Equalization tanks
  • Pumps
  • Hydraulic steel construction
  • Machine foundations
  • Bearing plates
  • Electrolytic cells
  • Storage tanks for handling chemicals
  • Apparatus for conveying effluents and chemicals
  • Storage tanks
  • Various towers and tanks in Sulfuric acid plants
  • Phosphoric acid plant
  • Ammonium sulfate plants
  • Urea prilling towers
  • Petrochemical Plants
  • Pulp & Paper mills
  • Leaching tanks
  • Chlorination and storage tanks
  • Spent electrolyte storage tanks
  • Cooling towers
  • Scrubber platforms
  • Thermal Power Plants
  • Battery Manufacturing Units

Popular Acid Resistant Systems

EP62-1

Master Bond EP62-1 is a two part, high performance epoxy resin system features long pot life at ambient temperatures and cures at moderately elevated temperatures. High thermal stability and exceptional chemical resistant properties.

EP62-1BF

EP62-1BF is a two part epoxy featuring the ability to withstand exposure to aggressive chemicals including acids, bases and solvents, even at high temperatures.

EP21ARHT

EP21ARHT is a durable, two component epoxy adhesive, sealant and coating. Can successfully withstand immersion for more than a year in hydrochloric and sulfuric acid. Cures at room temperature. High bond strength.

Packaging

We offer a wide array of packaging options to speed productivity, minimize waste and save energy including:

  • Quantities from grams to gallons
  • Cans, bottles and jars
  • Cartridges for manual and pneumatic guns
  • Bipaks for field service kits

This information has been sourced, reviewed and adapted from materials provided by Master Bond Inc.

For more information on this source, please visit Master Bond Inc.

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Master Bond Inc.. (2020, April 20). Acid Resistant Adhesives, Sealants and Coatings. AZoM. Retrieved on September 28, 2020 from https://www.azom.com/article.aspx?ArticleID=5846.

  • MLA

    Master Bond Inc.. "Acid Resistant Adhesives, Sealants and Coatings". AZoM. 28 September 2020. <https://www.azom.com/article.aspx?ArticleID=5846>.

  • Chicago

    Master Bond Inc.. "Acid Resistant Adhesives, Sealants and Coatings". AZoM. https://www.azom.com/article.aspx?ArticleID=5846. (accessed September 28, 2020).

  • Harvard

    Master Bond Inc.. 2020. Acid Resistant Adhesives, Sealants and Coatings. AZoM, viewed 28 September 2020, https://www.azom.com/article.aspx?ArticleID=5846.

Comments

  1. Nataraj Kumar Nataraj Kumar Germany says:

    Can I use Masterbond acid resistant glue or adhesive for Silicon samples? If yes, what is the price and how to order ?

    • Rolf Easto Rolf Easto AZoNetwork Team Member says:

      Hi Nataraj, thanks for asking and we've passed your comment onto the team at Master Bond, so hopefully you should hear from them very shortly.

    • Rohit Ramnath Rohit Ramnath United States says:

      Please feel free to contact us at your convenience at: http://www.masterbond.com/contact. We would be glad to help you further.

      • Hari Krishnan Hari Krishnan India says:

        sir can i use EP17HT-LO for bonding nylon and steel.....which should last for atleast 10 years.

      • Dennis Leandro Ortiz Dennis Leandro Ortiz Philippines says:

        Where can we buy your product here in the Philippines

  2. dan wu dan wu United Kingdom says:

    Hi,
    I wish to buy 5ml (in total of 2 tubes) of EP21ARHT - acid resistant glue, would you please tell me the price? Thank you.

  3. bade upendra bade upendra India says:

    Please let me know which adhesives can be used to stick rubber materials in strong acid environment? Thank you.

  4. RAHUL RAGHUWANSHI RAHUL RAGHUWANSHI India says:

    Dear Sir,

    I have a PTFE based system. The operating fluids are 80% Sulphuric Acid and 55% Hydroiodic Acid. I have detected some leakages in my system near PTFE tube fittings, Valve fittings and tank fittings. I am looking for an Acid (as mentioned above) resistant sealant that could be used with PTFE. Do you have any solution for me.

  5. Graham Marshall Graham Marshall United States says:

    Do you have a sealant that is acid resistant that I can use to cover a pressure sensor that is flexible enough to still transmit the pressure across the sealant layer to the pressure sensor  
    GDMarshall

The opinions expressed here are the views of the writer and do not necessarily reflect the views and opinions of AZoM.com.

Ask A Question

Do you have a question you'd like to ask regarding this article?

Leave your feedback
Submit