May 27 2013
Topics Covered
Introduction
Chemical Composition
Physical Properties
Other Designations
Applications
Introduction
Aluminium / aluminum 2xxx series are high strength alloys with copper (Cu) as the chief alloying element. Alloys of this series possess very high mechanical strength after heat treatment but low corrosion resistance. To increase the corrosion resistance of components manufactured from aluminum-copper alloys, they should be clad with pure aluminum or with aluminium / aluminum 6xxx alloys.
Aluminium / aluminum 2031 alloy is a heat treatable wrought alloy. The following datasheet will provide more details about aluminium / aluminum 2031 alloy.
Chemical Composition
The following table shows the chemical composition of aluminium / aluminum 2031 alloy.
Element |
Content (%) |
Aluminum, Al |
91 - 95.9 |
Copper, Cu |
1.8 - 2.8 |
Nickel, Ni |
0.60 - 1.4 |
Iron, Fe |
0.60 - 1.2 |
Magnesium, Mg |
0.60 - 1.2 |
Silicon, Si |
0.50 - 1.3 |
Manganese, Mn |
≤ 0.50 |
Zinc, Zn |
≤ 0.20 |
Titanium, Ti |
≤ 0.20 |
Other (each) |
≤ 0.050 |
Other (total) |
≤ 0.15 |
Physical Properties
The physical properties of aluminium / aluminum 2031 alloy are outlined in the following table.
Properties |
Metric |
Imperial |
Density |
2.77 g/cm³ |
0.100 lb/in³ |
Other Designations
Equivalent materials to aluminium / aluminum 2031 alloy are listed below:
-
BS H12
-
Alcan GB-D15S
-
BA 307
-
Hiduminium-56
Applications
Aluminium / aluminum 2031 alloy is chiefly used in the following areas:
-
Aircraft structures and propellers
-
Automotive bodies
-
Screw fittings.