Jul 31 2013
Topics Covered
Introduction
Chemical Composition
Physical Properties
Mechanical Properties
Thermal Properties
Other Designations
Applications
Introduction
Magnesium AZ61A-F alloy is available in forged, extruded hollow shapes and extruded solid shapes. This alloy is relatively inexpensive and exhibits good strength. This datasheet will elaborate on the properties and applications of this alloy.
Chemical Composition
The following table provides the chemical composition of magnesium AZ61A-F alloy.
Element |
Content (%) |
Magnesium, Mg |
92 |
Aluminum, Al |
5.8-7.2 |
Zinc, Zn |
0.4-1.5 |
Manganese, Mn |
≥0.15 |
Silicon, Si |
≤0.10 |
Iron, Fe |
≤0.0050 |
Nickel, Ni |
≤0.0050 |
Physical Properties
The physical properties of magnesium AZ61A-F alloy are given in the following table.
Properties |
Metric |
Imperial |
Density |
1.80g/cc |
0.0650 lb/in³ |
Melting Point(Incipient melting) |
≥418°C |
≥784°F |
Mechanical Properties
The mechanical properties of magnesium AZ61A-F alloy are listed in the table below.
Properties |
Metric |
Imperial |
Tensile Strength |
295 MPa |
42800 psi |
Yield strength (@strain 0.200%) |
180 MPa |
26100 psi |
Compressive Yield Strength (at 0.2% offset) |
125 MPa |
18100 psi |
Ultimate Bearing Strength |
500 MPa |
72500 psi |
Bearing Yield Strength |
285 MPa |
41300 psi |
Elongation at break (in 50 mm) |
12% |
12% |
Elastic Modulus (in tension) |
45 GPa |
6530 ksi |
Poisson's ratio |
0.35 |
0.35 |
Shear Modulus |
17 GPa |
2470 ksi |
Shear Strength |
145 MPa |
21000 psi |
Machinability (relative rating, 100=Best) |
100 |
100 |
Hardness, Brinell (500 kg load, 10 mm ball) |
55 |
55 |
Hardness, Vickers (estimated from Brinell) |
66 |
66 |
Hardness, Knoop (estimated from Brinell) |
70 |
70 |
Thermal Properties
The following table outlines the thermal properties of magnesium AZ61A-F alloy.
Properties |
Metric |
Imperial |
Thermal expansion co-efficient (@ 0.000-100°C/32-212°F) |
26 µm/m°C |
14.4 µin/in°F |
Thermal Conductivity |
70 W/mK |
486 BTU in/hr.ft².°F |
Other Designations
Some of the other designations that are used to denote magnesium AZ61A-F alloy are:-
Applications
Magnesium AZ61A-F alloy is used in applications that require good strength at moderate costs.