Styrene-Butadiene-Styrene Based Thermoplastic Elastomer - SBS TPE 80A.

Polymer Type

Thermoplastic

Advantages

Higher tensile strength, hardness and modulus than SBS TPE 35A.

Disadvantages

Lower tensile strength, hardness and modulus than SBS TPE 35D.

Typical Properties

Property

Value

Density (g/cm3)

0.94

Surface Hardness

SA80

Tensile Strength (MPa)

20

Flexural Modulus (GPa)

0.05

Notched Izod (kJ/m)

1.06+

Linear Expansion  (/°C x 10-5)

13

Elongation at Break (%)

700

Strain at Yield (%)

N/Y

Max. Operating Temp. (°C)

50

Water Absorption (%)

0.3

Oxygen Index (%)

19

Flammability UL94

HB

Volume Resistivity (log ohm.cm)

14

Dielectric Strength (MV/m)

20

Dissipation Factor 1kHz

0.005

Dielectric Constant  1kHz

2.8

HDT @ 0.45 MPa (°C)

20-

HDT @ 1.80 MPa (°C)

20-

Material. Drying  hrs @ (°C)

NI

Melting Temp. Range (°C)

160 - 200

Mould Shrinkage (%)

1

Mould Temp. Range (°C)

40 -  60

Applications

Workbench feet, end caps, tap washers, display board sheeting, toilet buffers, tractor mats.

 

Source : Abstracted from Plascams

For more information on Plascams please visit RAPRA Technology Ltd.

 

Tell Us What You Think

Do you have a review, update or anything you would like to add to this article?

Leave your feedback
Your comment type
Submit

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.