Jul 24 2013
Topics Covered
Introduction
Chemical Composition
Physical Properties
Mechanical Properties
Thermal Properties
Applications
Introduction
There are over 400 copper alloys available in the market today, each with its own unique properties, designed to match specific applications, manufacturing methods, and environments. UNS C72800 is a copper-nickel wrought alloy with very good corrosion resistance especially in seawater.
The following datasheet discusses the chemical composition and properties of copper UNS C72800.
Chemical Composition
The chemical composition of UNS C72800 copper alloy is outlined in the following table.
Element |
Content (%) |
Nickel, Ni |
9.5-10.5 |
Tin, Sn |
7.5-8.5 |
Zinc, Zn |
1 |
Iron, Fe |
0.5 |
Niobium, Nb |
0.10-0.30 |
Aluminum, Al |
0.1 |
Manganese, Mn |
0.05-0.30 |
Silicon, Si |
0.05 |
Antimony, Sb |
0.02 |
Titanium, Ti |
0.01 |
Magnesium, Mg |
0.005-0.15 |
Lead, Pb |
0.005 |
Phosphorus, P |
0.005 |
Boron, B |
0.001 |
Bismuth, Bi |
0.001 |
Sulfur, S |
0.0025 |
Copper, Cu |
Balance |
Physical Properties
The following table discusses the physical properties of copper UNS C72800.
Properties |
Metric |
Imperial |
Density |
8.97 g/cm3 |
0.324 lb/in3 |
Melting point |
916.7 - 1080 °C |
1682 - 1980 °F |
Mechanical Properties
The mechanical properties of copper UNS C72800 are tabulated below.
Properties |
Metric |
Imperial |
Tensile strength |
524 MPa |
76000 ksi |
Yield strength (annealed) |
248 MPa |
36000 ksi |
Poisson’s ratio |
0.35 |
0.35 |
Shear Modulus |
47.2 GPa |
6840 ksi |
Elongation |
8% |
8% |
Hardness, Rockwell C |
39.5 |
39.5 |
Machinability |
10 |
10 |
Thermal Properties
The thermal properties of copper UNS C72800 are tabulated below.
Properties |
Metric |
Imperial |
Thermal expansion co-efficient (at 20-200°C/68-392°F) |
13.5 µm/m°C |
7.50 µin/in°F |
Thermal conductivity |
54.8 W/mK |
380 BTU in/hr.ft².°F |
Applications
Copper UNS C72800 finds application in:
-
Springs
-
Electrical contacts
-
Relay elements
-
Marine components.