Posted in | Business | New Product

Airtech Advanced Materials Group Introduces NEW LTC3 Carbon Prepregs

LTC3 Carbon Prepregs offer a low temperature cure and high temperature use after post cure. LTC Prepregs allow the use of lower cost master model materials.

LTC3 Carbon Prepregs

LTC3-G1400 is a light weight tooling prepreg with a low temperature for the manufacture of composite tooling laminates capable of high temperature use.

LTC3-G1600 is a heavy weight tooling prepreg with a low temperature cure for the manufacture of composite tooling laminates capable of high temperature use.

LTC3-G1800 is a heavier weight tooling prepreg used to produce molds with a low temperature cure. The heavy weight material is used to build laminate bulk faster thus reducing the number of plies required. Saving up to 30% labor time on standard laminates, plus cost savings.

Benefits:

  • Lower CTE effect, greater tooling accuracy, less tool/part reworking.
  • Lower cost, low temperature master model materials.
  • Lower cost tooling laminates with heavier bulk ply G1800.

Source: https://www.airtechonline.com/

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Airtech International, Inc.. (2018, November 02). Airtech Advanced Materials Group Introduces NEW LTC3 Carbon Prepregs. AZoM. Retrieved on October 19, 2020 from https://www.azom.com/news.aspx?newsID=49925.

  • MLA

    Airtech International, Inc.. "Airtech Advanced Materials Group Introduces NEW LTC3 Carbon Prepregs". AZoM. 19 October 2020. <https://www.azom.com/news.aspx?newsID=49925>.

  • Chicago

    Airtech International, Inc.. "Airtech Advanced Materials Group Introduces NEW LTC3 Carbon Prepregs". AZoM. https://www.azom.com/news.aspx?newsID=49925. (accessed October 19, 2020).

  • Harvard

    Airtech International, Inc.. 2018. Airtech Advanced Materials Group Introduces NEW LTC3 Carbon Prepregs. AZoM, viewed 19 October 2020, https://www.azom.com/news.aspx?newsID=49925.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit