Written by AZoMSep 16 2001
|
|
Polymer Type |
Thermoplastic |
Advantages |
Very flexible, good abrasion resistance, good-notched izod impact strength and better elongation at break compared with unmodified polyamide 12. |
Disadvantages |
Reduced heat distortion temperature, increased coefficient of linear expansion and poor electrical characteristics compared with unmodified polyamide 12. |
Typical Properties |
| Density (g/cm3) | 1.03 | Surface Hardness | RR80 | Tensile Strength (MPa) | 25 | Flexural Modulus (GPa) | 0.4 | Notched Izod (kJ/m) | 0.07 | Linear Expansion (/°C x 10-5) | 12 | Elongation at Break (%) | 300 | Strain at Yield (%) | 37.5 | Max. Operating Temp. (°C) | 70 | Water Absorption (%) | 0.2 | Oxygen Index (%) | 21 | Flammability UL94 | V2 | Volume Resistivity (log ohm.cm) | 11 | Dielectric Strength (MV/m) | 55 | Dissipation Factor 1kHz | 0.08 | Dielectric Constant 1kHz | 3.8 | HDT @ 0.45 MPa (°C) | 135 | HDT @ 1.80 MPa (°C) | 50 | Material. Drying hrs @ (°C) | 2 @ 90 | Melting Temp. Range (°C) | 190 - 200 | Mould Shrinkage (%) | 1.4 | Mould Temp. Range (°C) | 40 - 60 | |
Applications |
Damping cogwheels, protective coverings, ski boots, tubing and profiles for the automotive industry. Flexible piping for air ducts and petrol and oil pipes for the automotive and machine building industries. Flexible cover caps. Sealing rings, sheet gaskets, diaphragms, cable fasteners, soles for sports shoes. |
Source : Abstracted from Plascams For more information on Plascams please visit RAPRA Technology Ltd. |