Metcal Soldering and Rework Technology at APEX

Metcal today announced plans to exhibit at the 2019 IPC APEX EXPO, scheduled to take place Jan. 29-31, 2019 at the San Diego Convention Center. The company will demonstrate its Connection Validation (CV) Robotic Soldering System, CV Soldering System with new hand-pieces, CV-500 Soldering System and VFX-1000H Volume Fume Extraction System in Booth #1314.

Metcal New CV Hand Pieces 18

CV Robotic Soldering System

Robotic soldering is becoming more commonplace as manufacturers look to reduce risk and increase productivity. Metcal’s new CV Robotic Soldering System addresses these needs by combining its patented CV technology with a new Smart Interface System. CV reduces unnecessary dwell time by signalling to the system to move to the next solder joint in the program after a good joint is formed. The Smart Interface System simplifies the programming process by integrating system controls through an easy to use interface.

CV Soldering System

Metcal will introduce the latest CV hand-pieces and assorted cartridges that transform the CV-5200 soldering system into the solution for even the most challenging soldering applications. All of the new hand-pieces are now available with a number of unique tip cartridge geometries. The tip cartridges are available in a variety of temperature series to satisfy the most challenging applications.

CV-500 Soldering System

The CV-500 soldering system excels at SMD touch-up and small component rework using the Ultrafine hand-piece and Ultrafine tweezer hand-piece(both sold separately). The CV-500 system also features Smartheart™ power on demand technology, a 2.8" color touchscreen with bold graphics, an integrated net power meter with optional tip temperature display and much more.

The CV-500 is compatible with most hand-pieces and upgrade kits for the CV soldering system. These ergonomic hand-pieces transform the CV system into a complete soldering solution for a wide variety of applications.

VFX-1000H Volume Fume Extraction System

The volume fume extraction system with HEPA filter offers a deep pleat pre-filter, a filter change/ system fail signal, and long life filters with low replacement costs. Additional features include built-in silencing, remote speed control, a remote start/stop interface and universal voltage.

For more information about any of Metcal’s electronics assembly bench tool solutions, visit metcal.com.

Source: http://www.okinternational.com/metcal

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Metcal. (2019, January 08). Metcal Soldering and Rework Technology at APEX. AZoM. Retrieved on November 15, 2019 from https://www.azom.com/news.aspx?newsID=50167.

  • MLA

    Metcal. "Metcal Soldering and Rework Technology at APEX". AZoM. 15 November 2019. <https://www.azom.com/news.aspx?newsID=50167>.

  • Chicago

    Metcal. "Metcal Soldering and Rework Technology at APEX". AZoM. https://www.azom.com/news.aspx?newsID=50167. (accessed November 15, 2019).

  • Harvard

    Metcal. 2019. Metcal Soldering and Rework Technology at APEX. AZoM, viewed 15 November 2019, https://www.azom.com/news.aspx?newsID=50167.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Submit