NatureWorks has announced a new initiative that will ensure that by 2020, 100% of the agricultural feedstock for Ingeo™ biopolymers and Vercet™ performance chemicals will be certified by the International Sustainability & Carbon Certification System (ISCC) to the ISCC PLUS standard of best practices in agricultural production.
NatureWorks was the first biopolymers manufacturer to become certified to the new ISCC PLUS standard in 2012, and currently has more than 40% of its agricultural feedstock certified. At full capacity, more than 90 farms will be involved in the program by 2020.
Sustainable Sourcing of Agricultural Feedstock
The ISCC PLUS certified crops are grown within 50 miles of the NatureWorks’ Blair, Nebraska, production facility, which has an annual production capacity of 150,000 metric tons of Ingeo biopolymer. Every farm entering the program receives training in adhering to the ISCC PLUS certification’s principles, which are the following:
- Protect Highly Biodiverse and High Carbon Stock Areas
- Implement best agricultural practices for the use of fertilizers and pesticides, irrigation, tillage, soil management, and the protection of the surrounding environment.
- Promote safe working conditions.
- Comply with human, labor, and land rights.
- Comply with laws and international treaties.
- Implement good management practices and continuous improvement.
Rich Altice, CEO and President of NatureWorks said: “New materials innovation is being driven by the tenants of the circular bioeconomy, and as we seek to decouple plastics from fossil feedstocks, we remain committed to feedstock diversification and to critically assessing the sustainability of each and every feedstock we use,”
Gernot Klepper, Chairman of the ISCC Association said: “We are very happy about NatureWorks’ commitment to sourcing sustainable agricultural feedstock. Agricultural producers have both a responsibility and a tremendous chance to contribute to meeting the Sustainable Development Goals of the United Nations. Certification with ISCC PLUS enables farmers to move toward more sustainable agricultural practices, thus supporting ecologic and social, as well as economic sustainability in agriculture and rural areas.”
New Plastics Economy Global Commitment
As part of NatureWorks’ commitment to renewable, sustainable feedstocks and materials, the Ellen MacArthur Foundation recently announced that NatureWorks, along with other global brandowners and manufacturers, have signed the New Plastics Economy Global Commitment. As a signatory, NatureWorks committed to the following in support of sustainable agriculture for bioplastics:
- By 2019, 60% of the company’s feedstock will be certified as sustainably and responsibly managed via ISCC PLUS.
- By 2020, 100% of feedstock will be certified as sustainably and responsibly managed via ISCC PLUS.
- By 2025, 100% of new feedstocks for additional manufacturing capacity will be certified as sustainably and responsibly managed via an independent third-party administered program.
ISCC PLUS is an independent third-party sustainability certification system developed in a multi-stakeholder initiative. The comprehensive program certifies the sustainability of agricultural feedstocks used for bio-based products, including both the environmental and social aspects of agricultural production. Site specific audits and certificates ensure full traceability and chain of custody along the supply chain, ensuring that the total volume of Ingeo received by the final user of the product can be traced back (and documented through a mass balance system) to the equivalent amount of certified, sustainable crop produced. ISCC certification has been adopted by global brands and is supported by non-governmental organizations.
Ingeo™ Biopolymers Range by NatureWorks
||Ingeo™ 3D860 by NatureWorks is a biopolymer (available as a formulated pellet) for PLA monofilament providing high impact strength and heat resistance associated with ABS. It is a practical, safe... view more
|Ingeo™ Biopolymer 2003D
||Polylactic acid. It is a thermoplastic resin derived from annually renewable resources. Ingeo biopolymer 2003D is a transparent general purpose extrusion grade that is used naturally or as part of a... view more
|Ingeo™ Biopolymer 2500HP
||Polylactic acid. Is a high viscosity grade designed for extrusion applications. Ingeo™ Biopolymer 2500HP is designed to crystallize during processing, leading to higher heat deflection temperatures... view more
|Ingeo™ Biopolymer 3001D
||Polylactic acid. It is a biopolymer, designed for injection molding applications. It is designed for clear applications with heat deflection temperatures lower than 120ºF (49ºC). It is recoverable... view more
|Ingeo™ Biopolymer 3052D
||Polylactic acid. It is a thermoplastic resin derived from annually renewable resources. It is recoverable in the form of material recycling, energy recovery, composting, and biodegradable. Used in... view more