Study Validates the Effectiveness of a Heating System for Building Refurbishment

Heating and air conditioning in buildings make up almost half of the total energy consumption in the European Union. What is more, nearly 75% relies on fossil fuels, according to data from the European Commission. Hence, reducing this consumption and integrating renewable energy in heating and air conditioning processes in buildings is one of today's priorities for scientific research.

The research team from the Thermal Machines and Engines Section at the University of Cordoba performed an experimental study that validated the effectiveness of a heating system that heats air in buildings using solar radiation. The device uses a series of heat collectors, known as UTCs (Unglazed transpired collectors), that absorb the heat generated in the outer layer of the facade when hit with sun rays. Later, using this energy, the ventilation air is preheated before going into the residences to heat them.

The system, patented decades ago, "has not had widespread use in Europe, other than a few experimental buildings", explains the lead author, Fernando Peci. The team installed the device on a test module of 4x2 meters subjected to the normal conditions of a home. Over the course of a month, during winter, this heat collector was monitored throughout different weather conditions such as solar radiation, room temperature, wind and solar radiation angle of impact.

According to the study's results, the heating demands needed to heat the building would be covered for 75% of the days accounted for in the study, proving that "this technology could offer great performance in order to heat buildings using solar energy", especially those without much glass on their facades and facing southwards, as the Northern Hemisphere receives more natural light during the day from that direction.

A strategy to refurbish buildings:

As the lead author of the research points out, this heating system could be advisable when renovating old buildings, since installing it does not alter the original facade. The heat collector is made up of a perforated metal plate -covered with a dark material- so it can connect to the ventilators and carry the heat inside, so the building would be minorly affected.

Furthermore, as Fernando Peci underscores, the team suggests using these ventilation systems in social housing, "in homes where most families can't afford to pay for heating costs". In this vein, the device would not only benefit the environment, but also translate into financial savings on the electricity bill, one of the most feared bills in the winter.

Source: http://www.uco.es/internacional/extranjeros/en/

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Your comment type
Submit

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.