From transparent heaters to radiative-cooling films and multispectral glazing, researchers are rethinking what a window can do when weather, sunlight, and seasonal demands change.

Paper: Thermal-regulating smart windows for a sustainable future. Image Credit: Molodid Studio
Glass facades are widely used in modern buildings, but conventional architectural glazing contributes substantially to heating and cooling energy demands in residential and commercial spaces.
A review paper published in Communications Materials examined recent developments in smart windows designed to regulate thermal conditions.
The authors describe how nanomaterials, functional polymers, and stimuli-responsive materials can turn conventional window glass into responsive glazing that adjusts to environmental conditions. These designs aim to balance natural daylight, indoor thermal comfort, and seasonal temperature control while reducing building energy use.
Heat Transfer Challenges in Conventional Glazing
Conventional windows are major routes for heat transfer through building envelopes. In summer, solar radiation raises indoor temperatures and increases cooling demand. In winter, heat escapes through the glazing, increasing heating requirements. Condensation and frost can also reduce visibility and affect safety.
Researchers have developed smart glazing to address these limits. Conventional automotive rear-window defrosters illustrate one established method: resistive heating wires warm the glass to clear moisture and frost. Fixed films and simple heaters can provide basic thermal control, but they do not offer the seasonal spectral control required in buildings. This has driven work on materials that regulate both light transmission and heat transfer.
Heating, Cooling, and Chromic Strategies
The review organizes thermal-regulating glazing around heating-oriented, cooling-oriented, and chromic technologies, with active and passive mechanisms used across these groups.
Heating and cooling designs can operate through either active or passive mechanisms, depending on whether they require an external input.
Active methods use electrical or physical stimuli to produce heating or cooling. These include transparent Joule heaters based on silver nanowire networks, oxide/metal/oxide multilayers such as indium tin oxide/silver/indium tin oxide stacks, and non-ohmic dielectric heaters made from plasticized poly(vinyl chloride) gels between flexible ionogel electrodes.
Solid-state thermoelectric modules based on the Peltier effect have also been studied in ventilated-window designs and in separate designs coupled with phase-change materials for thermal storage.
Passive designs operate without continuous external power. Some use transparent conductive oxides, including hydrogen-doped indium oxide, while others use carbon-doped amorphous boron nitride nanocoatings to reduce mid-infrared radiative heat loss.
Photothermal designs use infrared-absorbing materials, including MXene-based coatings and cellulose-based composite films, to capture solar energy outside the visible spectrum. Passive radiative-cooling windows transmit visible light while emitting heat through the atmospheric transparency window of 8-13 µm, and can cool below ambient temperature under suitable atmospheric conditions.
Chromic smart windows include active and passive variants that change their optical and thermal properties in response to particular stimuli. Examples include active electrochromic multilayers, mechanochromic elastomers with inclined micropores that alter light transmission under compressive strain, thermochromic hydrogels containing isotopically heavy water, and reversible photochromic metal oxides.
Advances in Spectral Control and Energy Efficiency
The review stresses the value of controlling visible, near-infrared, and long-wave infrared radiation for year-round thermal management.
Silver nanowire networks oriented by centrifugal spraying achieved a sheet resistance of 4.5 Ω/sq at about 73% optical transparency and reached surface temperatures of 102 °C at an applied voltage of 4 V.
Dielectric gel heaters maintained more than 90% optical transparency while providing uniform heating, but the paper identifies their relatively high AC driving voltage, about 100 V for a 45 °C operating point, as a limitation compared with low-voltage Joule heaters.
Hydrogen-doped indium oxide glass achieved a solar transmittance of 0.84 and a mid-infrared emissivity of 0.12, giving a spectral selectivity ratio of 7.2.
For passive solar energy harvesting, an ultrathin MXene monolayer about 2.5 nm thick achieved about 82.5% visible-light transmission and a solar-driven surface temperature rise of about 25 °C. When paired with a transparent oil-infused PDMS overlayer, the device shed ice in about 85 seconds at -20 °C.
Multispectral electrochromic devices enabled separate control of daylight transmission and solar heat rejection. Advanced tri-band devices demonstrated modulation of visible light by about 41%, near-infrared radiation by 54%, and thermal emissivity by 0.35.
Whole-building energy simulations projected that this multispectral switching could cut annual heating, ventilation, and air-conditioning (HVAC) energy consumption by up to 34% compared with commercial low-emissivity glazing.
Applications of Smart Glazing Technologies
Responsive thermal-regulating glazing has uses beyond conventional buildings. In building simulations, selective electrochromic glazing cut total annual energy consumption by about 16% in a hot-arid city and about 20% in a humid-subtropical city, while thermochromic glazing produced single-digit savings.
In automotive applications, transparent conductive-film defoggers remove windshield condensation without introducing optical distortion. A representative passive radiative-cooling film lowered the cabin temperature of parked vehicles by about 8 K.
In AR/VR smart glasses, a radiative-cooling lens carried heat away from a miniature projector and lowered lens temperature without fans or bulky heat pipes. Similar transparent films on flexible display cover windows removed internally generated heat while keeping the image visible.
In agriculture, selectively transparent polymer greenhouse films transmit photosynthetically useful visible wavelengths while reflecting parts of the green and near-infrared spectrum that add heat. Field tests found lower greenhouse temperatures and reductions in soil-water evaporation of up to about one-third.
Challenges and Future Directions for Smart Windows
Thermal-regulating smart windows still face barriers to commercial adoption.
Most prototypes remain limited to small substrates, so large-scale production with consistent properties is a major requirement. Building-integrated windows are expected to retain stable performance over service lifetimes of 20-30 years. Repeated ion insertion and extraction, delamination, microcracking, UV exposure, moisture ingress, and thermal cycling can degrade performance over time.
Strong encapsulation, chemically stable coatings, and mechanically tolerant materials will be needed to limit these failure modes.
Future work could use artificial intelligence (AI) and machine learning (ML) to speed material design and support predictive control in smart building networks. Pairing multispectral smart glazing with environmental sensors, weather data, occupancy information, and automated HVAC controls could allow windows to select optical and thermal states in response to changing conditions.
These methods could reduce building energy use and support more energy-efficient infrastructure, but long-term testing in real buildings across different climates will be needed to show how laboratory and simulation gains translate into practical energy savings.
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.