Aluminum 3025 Alloy (UNS A93025)

Topics Covered

Introduction
Chemical Composition
Physical Properties
Application

Introduction

Aluminium / aluminum 3000 series are aluminum / manganese alloys. Aluminium / aluminum 3025 alloy is a non-heat treatable wrought alloy. It has moderate strength, good corrosion resistance, and good formability.

The following datasheet will provide more details about aluminium / aluminum 3025 alloy.

Chemical Composition

The following table shows the chemical composition of aluminium / aluminum 3025 alloy.

Element Content (%)
Aluminum, Al 95.6 - 98.9
Silicon, Si ≤ 0.60
Iron, Fe 0.50 - 0.90
Manganese, Mn 0.40 - 1
Magnesium, Mg 0.20 - 0.80
Copper, Cu ≤ 0.30
Chromium, Cr ≤ 0.20
Titanium, Ti ≤ 0.10
Zinc, Zn 0.050 - 0.25
Nickel, Ni ≤ 0.050
Remainder (each) ≤ 0.050
Remainder (total) ≤ 0.15

Physical Properties

The physical properties of aluminium / aluminum 3025 alloy are outlined in the following table.

Properties Metric Imperial
Density 2.72 g/cm³ 0.0983 lb/in³

Application

Aluminium / aluminum 3025 alloy are used in the following items:

  • Heat exchangers in vehicles
  • Power plants
  • Kitchenware

Tell Us What You Think

Do you have a review, update or anything you would like to add to this article?

Leave your feedback
Submit