Articles | Latest Articles

Latest Articles

RSS

Plastic Wear Resistance –Wear Resistance of Engineering Thermoplastics

Wear occurs when two materials under load slide against each other. This wear occurs in such devices as rotating shafts. The wear resistance of a range of engineering theroplastics such as nylon, PTFE, PVC, PAI, PVDF, PPS and polycarbonate which are available from Dotmar.

From Dotmar EPP Pty Ltd 13 Mar 2008

Plastic Thermal Expansion – Thermal Expansion of Engineering Thermoplastics

The following thermal expansions chart compares the "Coefficient of linear thermal expansion" for a range of engineering theroplastics such as nylon, PTFE, PVC, PAI, PVDF, PPS and polycarbonate.

From Dotmar EPP Pty Ltd 13 Mar 2008

Maximum Continuous Operating Temperature – Maximum Continuous Operating Temperature of Engineering Thermoplastics

The maximum continuous operating temperature can be measured in two categories, short time and continuous use over a period of 5000/20,000 hrs.

From Dotmar EPP Pty Ltd 13 Mar 2008

Plastic Strength – Tensile Strength of Engineering Thermoplastics

Engineering thermoplastics vary in their tensile strength. Provided herein is a comparison of tensile strength for a range of engineering theroplastics such as nylon, PTFE, PVC, PAI, PVDF, PPS and polycarbonate which are available from Dotmar.

From Dotmar EPP Pty Ltd 13 Mar 2008

Plastic Machinability – Machinability of Engineering Thermoplastics

The plastic machinability index for Dotmar engineering thermoplastics is a nominal ranking out of 20 = best. provided herein is a comparison of a range of engineering theroplastics such as nylon, PTFE, PVC, PAI, PVDF, PPS and polycarbonate which are available from Dotmar.

From Dotmar EPP Pty Ltd 13 Mar 2008

PAI Torlon 4203 & 4503 – Properties and Applications of PAI Torlon 4203 & 4503

The TORLON PAI grades, combining excellent retention of mechanical strength, stiffness and creep resistance over a wide temperature range with extremely low thermal expansion up to 250°C, are top-rank materials for high temperature applications.

From Dotmar EPP Pty Ltd 13 Mar 2008

Plastic Impact Resistance – Impact Resistance of Engineering Thermoplastics

The impact resistance of a range of engineering thermoplastics is provided. This information can be used as a design guide, but you should contact Dotmar for definitive information pertaining to your particular application.

From Dotmar EPP Pty Ltd 13 Mar 2008

Plastic Co-efficient of Friction - Co-efficient of Friction of Engineering Thermoplastics

The coefficient of Friction of a material is the measure of the sliding resistance of a material over another material. In the case of thermoplastics the mating part is normally steel.

From Dotmar EPP Pty Ltd 13 Mar 2008

Plastic Chemical Resistance - Chemical Resistance of Engineering Thermoplastics

This Dotmar Plastic Chemical Resistance comparative index should be considered only as roughly indicative. However, it provides a general overview of the relative chemical resistance of various engineering thermoplastics and should be helpful in the selection of a polymer for your application.

From Dotmar EPP Pty Ltd 13 Mar 2008

Conveyor Products (DCP) – Properties and Applications of Conveyor Products

Dotmar supplies a range of conveyor belt products to suit various applications. They cater for different types of conveyor belts such as flat top chain and belts, modular belts etc and can cater for environments such as high and low temperature, food contact and chemical contact.

From Dotmar EPP Pty Ltd 13 Mar 2008

ATS Series 3110/3210 - Lab Furnaces

ATS Series 3110/3210 - Lab Furnaces

Introducing ATS' lab furnaces and high temperature accessories - ATS Series 3110/3210.

From Applied Test Systems, LLC.

Revontium™: Compact XRF Spectrometer

Revontium™: Compact XRF Spectrometer

Revontium™ is a compact XRF spectrometer that delivers high-quality elemental analysis in a compact,tabletop format.

From Malvern Panalytical

UV Cure Dielectric Sensor: Precision Monitoring for UV Cured Resins with Quick-Connect Fixture

UV Cure Dielectric Sensor: Precision Monitoring for UV Cured Resins with Quick-Connect Fixture

This product enables precise monitoring of UV-cured resins, measuring dielectric/conductive properties within a thin resin layer. The Quick-Connect Fixture, offers accurate UV exposure parameter measurement with a suspended thermocouple.

From Lambient Technologies

The Current State of the Global Semiconductor Market

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.