Latest Articles

RSS

Polysulphone - Psul 30% Carbon Fibre Reinforced

Relative advantages, disadvantages and applications are listed together with a table of typical properties.

5 Sep 2001

Polysulphone - Psul 30% Glass Fibre Reinforced

Better flammability characteristics, superior tensile strength, flexural strength and notched izod impact strength, excellent creep resistance, slightly improved heat distortion temperature and good mould shrinkage compared with unmodified PSul.

5 Sep 2001

Polysulphone - Psul

Contains a general overview of the polymer Polysulphone including relative advantages, disadvantages and applications, together with a table of typical properties.

5 Sep 2001

Styrene Maleic Anhydride Terpolymer - SMAt

Better impact performance than SMAc. Higher temperature stability than ABS. Better creep resistance than SAN or ABS. May be electroplated and is easily processable.

5 Sep 2001

Polytetrafluoroethylene - PTFE 15% Graphite Filled

Low coefficient of friction compared to other filled PTFE materials. Finds uses for bearings, antistatic applications, wear pads, and piston rings.

5 Sep 2001

Polytetrafluoroethylene - PTFE 15% Glass Fibre Filled

Relative advantages, disadvantages and applications are listed together with a table of typical properties.

5 Sep 2001

Polytetrafluoroethylene - PTFE 60% Bronze Filled

High thermal conductivity and highest modulus of the PTFE range. Relative advantages, disadvantages and applications are listed together with a table of typical properties.

5 Sep 2001

Polystyrene - PS Medium Impact

Marginally improved toughness, relative advantages, disadvantages and applications are listed together with a table of typical properties.

4 Sep 2001

Polystyrene - PS Structural Foam

Rigid parts of low weight possible, i.e. for the same rigidity, a foam of half the density of a solid needs only a 25% greater wall thickness.

4 Sep 2001

Polystyrene - PS 2% Silicone Lubricated

The addition of silicone improves both granule flow and melt plasticisation during moulding or extrusion.

4 Sep 2001

Editorial Highlights

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

Latest Articles

Polysulphone - Psul 30% Carbon Fibre Reinforced

Polysulphone - Psul 30% Glass Fibre Reinforced

Polysulphone - Psul

Styrene Maleic Anhydride Terpolymer - SMAt

Polytetrafluoroethylene - PTFE 15% Graphite Filled

Polytetrafluoroethylene - PTFE 15% Glass Fibre Filled

Polytetrafluoroethylene - PTFE 60% Bronze Filled

Polystyrene - PS Medium Impact

Polystyrene - PS Structural Foam

Polystyrene - PS 2% Silicone Lubricated

A New Approach to Flash Point Testing

How to Use AFM to Study 2D Materials and Superlattices

How are Fine Ceramics Supporting the Next Generation of Renewable Energy?

Benchtop micro-XRF System for the Elemental Analysis of Samples

Advanced Masterbatch and Compounding for Polymers and Plastics

AirBreather Platform for Continuous Gas Analysis

Sponsored Content

Introduction to Polymer Analysis Using Near-Infrared and Raman Spectroscopy

Ethylene Oxide Regulations: How Changes Might Play Out Under New Administration

How the Technician Shortage is Slowing Industry Expansion

Leveraging Coriolis Flow Meters for Accurate Mass Flow and Density

Editorial Highlights

The Current State of the Global Semiconductor Market

How are Graphene Batteries Made?

What Role Will The IoT Play In The Electric Vehicle Industry?

Latest Articles

A New Approach to Flash Point Testing

How to Use AFM to Study 2D Materials and Superlattices

How are Fine Ceramics Supporting the Next Generation of Renewable Energy?

1Smart Coatings: Thermally Responsive Polymer Brushes for Advanced Applications

23D-Printed Organic Tissue Models Mimic Living Organs

3Pioneering Large-Scale Aluminum 3D Printing

4Upcycling LDPE: Transforming Plastic Waste into High-Value Graphite

5New Study Sheds Light on How Copper Catalysts Degrade During Artificial Photosynthesis

6Forge Nano Secures $40 M to Scale U.S. Battery Manufacturing and Commercial Semiconductor Equipment Businesses

Sponsored Content

Editorial Highlights