Latest Articles

RSS

An Introduction to Thermal Analysis of Thermosets

The current experiment was performed to find the glass transition temperature using a method which depends upon the change of elastic behavior.

From Mettler Toledo - Thermal Analysis 26 Jul 2018

Measurements of Thermal Effects on Thermoplastics

In this experiment, the sample used consisted of pelletized PE-LD and PE-LLD and PE-HD in the form of a film.

From Mettler Toledo - Thermal Analysis 26 Jul 2018

Thermal Effects on Elastomers

The aim of the current experiment was to evaluate the glass transition temperature using SBR as an example.

From Mettler Toledo - Thermal Analysis 26 Jul 2018

Thermal Analysis in Practice – Polymers

Polymers are also called macromolecules, being very large organic molecules composed of an extremely high number of repeating smaller units.

From Mettler Toledo - Thermal Analysis 26 Jul 2018

Analytical Method Validation in Thermal Analysis

This article discusses the computerized system validation and analytical method validation and instrument qualification in thermal analysis.

From Mettler Toledo - Thermal Analysis 26 Jul 2018

A Guide to Getting Most Out of Your Thermal Analysis System

There are some general requirements for the preparation of samples which are equally applicable to DSC, TGA, TMA and DMA.

From Mettler Toledo - Thermal Analysis 26 Jul 2018

Using Jet Edge X-5 for Elaborate Cuts of Materials

Two decades ago, Lloyd Smith, owner of Gulf Machine Shop of Lake Charles, Louisiana, quoted a big project for a paper mill.

From Jet Edge Waterjet Systems 23 Jul 2018

Cut Corners with the Aquablast

Due to the steep drop in the production of natural gas in older UK North Sea gas fields, energy companies have been forced to finance considerable decommissioning works.

From Jet Edge Waterjet Systems 23 Jul 2018

Using Plastifab for Indoor WaterJet Manufacture

When Tualatin, Oregon-based company Plasti-Fab, Inc., signed a contract to cut hundreds of circles out of 8,000-pound fiberglass plates, it decided that abrasive waterjet would best complete the job.

From Jet Edge Waterjet Systems 23 Jul 2018

Providing Dependable Service with the Jet Edge X-5

JACQUET Midwest has set up a dual head 5-axis Jet Edge EDGE X-5® waterjet cutting system at its metal processing facility in Racine, Wisconsin. The EDGE X-5 is the third Jet Edge system of JACQUET Midwest and is the 13th Jet Edge waterjet nationally.

From Jet Edge Waterjet Systems 23 Jul 2018