Electronics News

RSS

Tel Aviv University Scientist Fabricates Memory Transistor Using Carbon Molecules

Elad Mentovich, a PhD candidate at the Tel Aviv University, has developed a memory transistor using carbon molecules that can be used to both transfer and store energy and eliminate the requirement for a capacitor.

18 Jul 2012

New Report Analyzes Latest Trends in Market for Thin-Film and Printed Batteries

Research and Markets has included a new research report titled ‘Thin-Film and Printed Battery Markets - 2012’ to its catalogue.

17 Jul 2012

Affordable General Purpose Cryogen-Free Probe Station Introduced by Lake Shore

Lake Shore Cryotronics, Inc., a manufacturer of scientific sensors, instruments, and systems for precise measurement and control, introduces the new Model CRX-6.5K cryogenic probe station, an affordable, general purpose cryogen-free probe station that is both cost effective and convenient to use.

From Lake Shore Cryotronics Inc. 12 Jul 2012

Bemis and Thin Film Electronics Ink Joint Development Agreement

Bemis and Thin Film Electronics have reported that they have inked a joint contract to make a Bemis intelligent packaging platform. This joint agreement will expedite the commercial growth of functional sensor labels.

From Amcor PLC 12 Jul 2012

Oxford Instruments Launch Latest Generation Etch and Deposition Tool

Oxford Instruments has this week launched the PlasmaPro 100 system, their latest generation etch and deposition tool, offering world leading performance. The system is ideally suited to many key market applications, including MEMS, HBLED, Semiconductor Electronics, Failure Analysis and Photovoltaics.

From Oxford Instruments Plasma Technology 11 Jul 2012

Global Market for Thin Film Batteries to Reach $1,986.5 Million In 2018

Frost & Sullivan reports a huge growth potential for thin film batteries. It estimates the market to grow to $1,986.5 million in 2018 from $86.7 million in 2011. Thin film batteries are suitable for ultra-thin devices.

9 Jul 2012

TDK Develops Wireless Power Transfer Coil Unit for Smartphones

TDK has reported that it has developed a wireless power transfer coil unit specifically designed for use in smartphones and other mobile devices. The receiving coil can be integrated into smartphones. It has a width of just 0.57 mm.

9 Jul 2012

New Scalable Technique to Fabricate High-Speed, Self-Aligned Graphene Transistors

Graphene, a one-atom-thick graphitic carbon layer, shows promise to be used as a transistor that may help develop faster and smaller consumer electronic devices.

7 Jul 2012

Stretchable Electronics Can Enable Integration of Medical Devices into Human Body

A research team from the Northwestern University’s McCormick School of Engineering has created a design that enables development of highly stretchable electronics for medical applications. The design allows a device to stretch and bend over 200% of its original size, which is four times higher than the current technology. This is achieved by a combination of liquid metal and porous polymer.

4 Jul 2012

Vishay Unveils Three-Phase Cylindrical Capacitor Series for Power Electronics

Vishay Intertechnology, a manufacturer of passive electronic components and discrete semiconductors, has declared that new range of three-phase cylindrical capacitors have been unveiled for use in power electronics. These cylindrical capacitors feature high current potential and nine standard voltage ratings from 400 V AC to 1650 V AC. They have an extensive range of capacitance and offer packaging options.

4 Jul 2012

Editorial Highlights

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

Electronics News

Tel Aviv University Scientist Fabricates Memory Transistor Using Carbon Molecules

New Report Analyzes Latest Trends in Market for Thin-Film and Printed Batteries

Affordable General Purpose Cryogen-Free Probe Station Introduced by Lake Shore

Bemis and Thin Film Electronics Ink Joint Development Agreement

Oxford Instruments Launch Latest Generation Etch and Deposition Tool

Global Market for Thin Film Batteries to Reach $1,986.5 Million In 2018

TDK Develops Wireless Power Transfer Coil Unit for Smartphones

New Scalable Technique to Fabricate High-Speed, Self-Aligned Graphene Transistors

Stretchable Electronics Can Enable Integration of Medical Devices into Human Body

Vishay Unveils Three-Phase Cylindrical Capacitor Series for Power Electronics

A New Approach to Flash Point Testing

How to Use AFM to Study 2D Materials and Superlattices

How are Fine Ceramics Supporting the Next Generation of Renewable Energy?

Advanced Masterbatch and Compounding for Polymers and Plastics

AirBreather Platform for Continuous Gas Analysis

SU7000 & SU8700 Schottky Field Emission SEMs: Ultra High-Resolution & Analytical Imaging

Sponsored Content

The Ultimate Guide to PPE for Rescue and Recovery Missions

Moisture, Volatiles and Ash Determination in Coal & Coke

Powering the Future: The Solid-State Battery Revolution

What is the Gold Foil Covering Spacecraft and Satellites?

Editorial Highlights

The Current State of the Global Semiconductor Market

How are Graphene Batteries Made?

What Role Will The IoT Play In The Electric Vehicle Industry?

Electronics News

A New Approach to Flash Point Testing

How to Use AFM to Study 2D Materials and Superlattices

How are Fine Ceramics Supporting the Next Generation of Renewable Energy?

1Smart Coatings: Thermally Responsive Polymer Brushes for Advanced Applications

2Pioneering Large-Scale Aluminum 3D Printing

33D-Printed Organic Tissue Models Mimic Living Organs

4Upcycling LDPE: Transforming Plastic Waste into High-Value Graphite

5Perovskite and Copper System Creates C2 Chemicals from CO2

6DS Smith Partner With TPV Automotive to Create a Sustainable Fiber-Based Packaging for the Protection of Car Wheel Carriers

Sponsored Content

Editorial Highlights