SABIC Highlights NORYL FE1630PW Resin at Fakuma Trade Fair

Here at the Fakuma trade fair, booth #B5-5506, SABIC’s Innovative Plastics business today announced a new NORYL™ resin that not only complies with current European and global sustainability regulations governing materials used in potable water systems, but also with new, tougher regulations slated to go into effect in 2016.

SABIC’s New NORYL™ Resin can be used for Potable Water Systems, Meeting Current and Upcoming Global Sustainability Regulations

Developed at SABIC’s Fluid Engineering Center of Excellence in the Netherlands, NORYL FE1630PW resin is a 30-percent glass-reinforced polyphenylene ether (PPE) that offers excellent hydrological performance in both cold and hot water systems. The next-generation resin also meetstighteningglobal specifications regarding compliance of glass fiber and sizing with U.S. and European food contact requirements. This PPE technology advancement further demonstrates SABIC’s proactive efforts to provide the fluid engineering industry with higher-performing, compliant materials that lead regulatory changes.

“Our new NORYL resin solution is part of SABIC’s global sustainability strategy to createnew technologies that help our customers conserve natural resources, such as drinking water,” said Ilknur Gur, general manager, Specialty Portfolio in Europe, Innovative Plastics. “Improving the performance and lifespan of water carrier systems can make an important contribution to human health while supporting global industry demand for high-end, environmentally responsible thermoplastics. The launch of our new NORYL resin also showcases how our Fluid Engineering Center of Excellence and our world-class experts continue to break new ground in materials science, including state-of-the-art testing, to enable SABIC to meet the current and future needs of our customers.”

Going Above Today’s Standards

Plastics regulated under the major European and global directives for potable water systems already must comply with the food contact requirements of Food Contact Europe (FCEU) and the U.S. Food and Drug Administration (FDA). In 2016, these rules will be expanded to include glass fiber and sizing. Glass-reinforced NORYL FE1630PW resin has been rigorously tested and shown to meet these upcoming standards, as well asGermany’s KTW regulation, the European and UK Water Regulations Advisory Board (WRAS), France’s Attestation de Conformite Sanitaire (ACS) and the global NSF/ANSI Standard 61.

NORYL FE1630PW resin delivers long-term water resistance under conditions of fluctuating temperature (up to 85C) and pressure, including water hammer.Its performance has been substantiated with data from SABIC’s Fluid Engineering Centre of Excellence Laboratory, which is available upon request. The material also provides excellent processing characteristics including good stability and low reject rates.

Applications for NORYL FE1630PW include hydroblocks for boilers used for heating and drinking water, faucet cartridges andshower head water guide parts.

The new material is available globally.


Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    SABIC Innovative Plastics. (2019, February 09). SABIC Highlights NORYL FE1630PW Resin at Fakuma Trade Fair. AZoM. Retrieved on September 27, 2020 from

  • MLA

    SABIC Innovative Plastics. "SABIC Highlights NORYL FE1630PW Resin at Fakuma Trade Fair". AZoM. 27 September 2020. <>.

  • Chicago

    SABIC Innovative Plastics. "SABIC Highlights NORYL FE1630PW Resin at Fakuma Trade Fair". AZoM. (accessed September 27, 2020).

  • Harvard

    SABIC Innovative Plastics. 2019. SABIC Highlights NORYL FE1630PW Resin at Fakuma Trade Fair. AZoM, viewed 27 September 2020,

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback