Nanoscale Precipitate Coarsening Degrades Aluminum Strength During Spent Fuel Storage

A research team led by Senior Researcher Junho Lee of the Department of Nuclear Safety Research at the Korea Institute of Materials Science (KIMS), headed by President Chul-jin Choi, and a team led by Professor Chi-Bum Bahn of Pusan National University have jointly identified why aluminum alloys used as structural materials inside spent nuclear fuel dry storage casks lose strength when exposed to heat for extended periods.

The researchers also proposed an evaluation method for predicting how the material's properties will change decades into the future. The findings are expected to serve as a key technology for the safe long-term storage of spent nuclear fuel by enabling researchers to predict how much the material will weaken after prolonged use without having to wait decades for full-duration storage tests.

Spent nuclear fuel removed from a reactor must be safely managed for an extended period before final disposal. One method, known as interim dry storage, stores spent nuclear fuel in specially designed casks and removes decay heat without relying on water as a cooling medium. Inside the storage casks, structural components such as basket rails and shims are used to support the spent nuclear fuel and maintain it in a prescribed arrangement. Although these components are exposed to heat for long periods, direct inspection or replacement becomes difficult once the fuel has been loaded. It is therefore important to understand in advance how their material properties change over time.

The 6061-T651 aluminum alloy used for these internal structural components is lightweight and has high thermal conductivity. However, prolonged exposure to elevated temperatures can cause a phenomenon known as overaging, in which the nanoscale precipitates that strengthen the material grow larger and become more widely spaced, resulting in lower strength and hardness. Previous studies have focused mainly on short-term aging or creep behavior of aluminum alloys, leaving limited experimental data linking long-term microstructural changes caused by thermal exposure with actual reductions in mechanical strength.

The research team traced the long-term weakening of the aluminum material during decades of spent nuclear fuel storage to nanoscale changes within the alloy. After exposing 6061-T651 aluminum alloy to temperatures ranging from 150 to 240 °C for up to 10,000 hours, the researchers found that the nanoscale precipitates responsible for strengthening the material tranformed and coarsened, increasing the spacing between precipitates and reducing their strengthening effect. Through this analysis, the team clarified the long-term degradation mechanism by which these microstructural changes lead to actual reductions in strength and hardness.

The researchers went a step further by proposing a method for predicting how the aluminum alloy will perform decades into the future using shorter-duration tests conducted at higher temperatures. They established a time-temperature equivalence relationship in which similar degradation states occur under different combinations of temperature and exposure time, allowing accelerated high-temperature test results to be linked with material changes expected under actual long-term storage conditions. Using this approach, changes in the properties of internal structural materials after decades of service can be predicted without conducting storage tests lasting several decades, while also enabling the accelerated test conditions required for long-term performance assessments to be established.

The long-term thermal-aging data and evaluation method obtained through this study are expected to be used to assess whether internal materials in spent nuclear fuel dry storage casks can maintain adequate safety over extended periods when interim dry storage facilities are introduced in Korea. The results are also expected to provide data needed for time-limited aging analyses (TLAAs) and aging management programs (AMPs), which evaluate and manage changes in material performance during long-term service, and thereby support future safety assessments and licensing of dry storage systems.

"To safely store spent nuclear fuel over long periods, it is important to understand not only the initial performance of internal components but also exactly how the materials change over time," said Junho Lee, Senior Researcher and project leader at KIMS. "This study is significant because it reveals how nanoscale changes within the material lead to actual strength degradation and provides a basis for predicting material performance decades into the future."

Tell Us What You Think

Do you have a review, update or anything you would like to add to this news story?

Leave your feedback
Your comment type
Submit

While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.

Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.

Please do not ask questions that use sensitive or confidential information.

Read the full Terms & Conditions.