Spin Welding System for Assembly of Thermoplastic Components

Forward Technology Industries has developed a new Omega III MCRI positional spin welding system for the assembly of thermoplastic components. The sophisticated machinery ensures precise positioning, dependable hermetic seals and high mechanical strength at the joint interface.

Programmable control of the pressure profile is achieved using a proportional valve and all weld parameters are monitored and actual weld results area analysed. This system provides strict control of the production process by analysing speed, time, height and travel after each weld cycle.

Posted February 2003

Citations

Please use one of the following formats to cite this article in your essay, paper or report:

  • APA

    Forward Technology Industries. (2018, August 16). Spin Welding System for Assembly of Thermoplastic Components. AZoM. Retrieved on September 30, 2020 from https://www.azom.com/article.aspx?ArticleID=1937.

  • MLA

    Forward Technology Industries. "Spin Welding System for Assembly of Thermoplastic Components". AZoM. 30 September 2020. <https://www.azom.com/article.aspx?ArticleID=1937>.

  • Chicago

    Forward Technology Industries. "Spin Welding System for Assembly of Thermoplastic Components". AZoM. https://www.azom.com/article.aspx?ArticleID=1937. (accessed September 30, 2020).

  • Harvard

    Forward Technology Industries. 2018. Spin Welding System for Assembly of Thermoplastic Components. AZoM, viewed 30 September 2020, https://www.azom.com/article.aspx?ArticleID=1937.

Tell Us What You Think

Do you have a review, update or anything you would like to add to this article?

Leave your feedback
Submit