Synthesis of BaTiO3 and Evaluation of Optical Properties |
27/12/2010 |
10.2240/azojomo0306 |
R.Vijayalakshmi and V. Rajendran |
Hydrogen Oxidation Activity and Co-Tolerance of Pt-Ni Alloy Nanoparticles Prepared on Ni Substrate |
27/12/2010 |
10.2240/azojomo0305 |
Eiji Higuchi, Masahiro Ieguchi and Hiroshi Inoue |
Influence of Surfactants on the Synthesis of TiO2 Nanoparticles |
27/12/2010 |
10.2240/azojomo0304 |
R.Vijayalakshmi and K.V. Rajendran |
Surface Modification of Diamond Powder Through Dissolution of CO2 in Water |
27/12/2010 |
10.2240/azojomo0303 |
Heidy Visbal, Chanel Ishizaki and Kozo Ishizaki |
A Novel Approach to Synthesize Carbon Nanotubes, Carbon Nanocoils, Carbon Microcoils on the Surface of Metallic Wire: Application in Vacuum Electronic Devices |
23/12/2010 |
10.2240/azojomo0302 |
Sanjay Agarwal, B. Yamini Sarada and Kamal K. Kar |
Mechanical Properties of Goat Leather Photo Grafted with Acrylate-Epoxidized Soybean Oil |
23/12/2010 |
10.2240/azojomo0301 |
E.Vigueras-Santiago, S. Hernández-López, I. Linares-Hernández and K Linares-Hernández |
A New Mechmism of Grinding Wheel Loading Phenomenon Evaluated by Machining a Magnesium Alloy |
23/12/2010 |
10.2240/azojomo0300 |
NGUYEN Tien Dong, Koji MATSUMARU, Masakazu TAKATSU and Kozo ISHIZAKI |
Photoluminescence Studies of Epitaxial ZnO Thin Films on Si (100) Substrates by Pulsed Laser Deposition |
22/11/2010 |
10.2240/azojomo0287 |
Ashok Kumar, Sathyaharish Jeedigunta, I. Tarasov and S. Ostapenko |
Sintering of Silicon Nitride Nano-Powders Prepared by High-Energy Mechanical Milling |
22/11/2010 |
10.2240/azojomo0286 |
Toshiyuki Nishimura, Xin Xu, Naoto Hirosaki, Yoshinobu Yamamoto and Hidehiko Tanaka |
Design-Synthesis-Evaluation of CrN-Based Nanocomposite Hard Coating |
19/11/2010 |
10.2240/azojomo0285 |
Kwang Ho Kim, Se-Hun Kwon and Ji Hwan Yun |
Abrasive Grain Efficiency and Surface Roughness for Machining Ceramics by Newly Developed Cup-Type Diamond-Grinding-Wheels |
19/11/2010 |
10.2240/azojomo0284 |
TienDong Nguyen, Koji Matsumaru, Masakazu Takatsu and Kozo Ishizaki |
High Young’s Modulus With High Damping Capacity of Porous Alumina |
19/11/2010 |
10.2240/azojomo0283 |
Tetsu Takahashi, Koji Matsumaru and Kozo Ishizaki |
Fabrication of Chemical Mechanical Polishing (CMP) Pad Dresser by Using Chemical Reaction Between Diamond Abrasive Grains and Titanium Matrix |
19/11/2010 |
10.2240/azojomo0282 |
J.P. Wiff, Y. Takatsuru and K. Matsumaru |
Preparation of Stacked Polypyrrole-Coated Non-Woven Fabrics for an Electromagnetic Wave-Absorbing Sheet |
9/11/2010 |
10.2240/azojomo0299 |
Yoshihiro Egami,Takashi Yamamoto, Kunio Suzuki, Tadashi Yasuhara and Hiroshi Inoue |
Effect of K+ Doping on the Phase Transformation of TiO2 Nanoparticles |
9/11/2010 |
10.2240/azojomo0298 |
R.Vijayalakshmi and K. V. Rajendran |
Transparent Cr-Doped Al2O3 Made by Pulsed Electric Current Sintering Process |
9/11/2010 |
10.2240/azojomo0297 |
Khanh Quoc Dang and Makoto Nanko |
Influences of Cr Addition on Internal Oxidation of Ni(Al) Solid Solution |
9/11/2010 |
10.2240/azojomo0296 |
Makoto Nanko and Katsumi Uemura |
Synthesis and Characterization of Ru Doped TiO2 Nanoparticles by A Sol-Gel and A Hydrothermal Process |
9/11/2010 |
10.2240/azojomo0295 |
Hyun-Ju Kim, Sung Bin Bae and Dong- Sik Bae |
Influence of Deposition Temperature on Titania Films Deposited by Ultrasonic Spray Pyrolysis |
9/11/2010 |
10.2240/azojomo0294 |
A. Nakaruk, D. S. Perera and C. C. Sorrell |