Latest Articles

RSS

Zeta Potential – Using Zeta Potential Measurements to Study Particle Adsorption

Mixed Mode Measurement or M3 is a new method of making zeta potential measurements that uses the best features of both stationary layer and fast field reversal (FFR) techniques in a capillary cell.

From Malvern Panalytical 13 Aug 2007

Reducing Milling Start Up Times Using Online Particle Size Analysis

Starting up a new process typically involves a series of iterative changes to process settings until the particle size is within the required specification. This case study demonstrates the benefit of using on line particle size analysis.

From Malvern Panalytical 13 Aug 2007

Cast Irons – Specifications for Gray Iron and Ductile Irons

Fonderie Saguenay specialise in producing engineering components cast from gray iron and ductile iron. These materials are described and typical properties such as tensile strength, hardness, elongation and proportional limit are provided for the various grades and specifications.

From Fusium 7 Aug 2007

The Role of Ceramics and Nanoceramics in Medical Applications

The use of bioceramics in medical applications is on the increase. This is in part due to the expanding range of materials they encompass, which is in turn influenced by new materials and processing technologies.

3 Jul 2007

Overgrinding in the Cement Industry – Real Time Particle Size Analysis Reducing Running Costs

Overgrinding represents a substantial problem in milling, due mainly to the use of low throughput off-line particle size characterization methods. This case study demonstrates how on-line particle size analysis measurements and automated process control can increase productivity and reduce costs.

From Malvern Panalytical 25 Jun 2007

Reaction Bonding of Zinc Oxide (RBZO) to Produce ZnO-Based Varistors

Varistors are commonly made using Zinc Oxide (ZnO) in an expensive process. Recent research work has been done to develop a method for producing ZnO varistors from inexpensive raw materials in a novel fabrication method based on the reaction bonding process.

14 Jun 2007

Cadmium Sulfide Pellets for Growth of Thin Films by Pulsed Laser Deposition

This research work looks at a production method for making CdS thin films in a manner that is low in cost, low in contamination and results in minimal contact with the operator. The system is Pulsed Laser Deposition Modified (PLD-M) and gave films that are homogeneous and uniform without holes.

13 Jun 2007

Study of Ceramic Seal For Solid Oxide Fuel Cells

Solid Oxide Fuel Cells (SOFC) have been of interest for an alternative power generator. Sealing these units is one of the areas that needs further work before they can be put into widespread commercial use. This work looks at sealing SOFCs with ceramic adhesives

7 Jun 2007

Phase Evolution During Preparation of Spinel-Containing Refractory Cements, From Argentine Dolomite

Spinel containing high alumina refractory cements are in high demand by the glass, cement and metallurgy industries. These spinel cements are normally produced with high cost materials. A solution is to generate the spinel phase in-situ when making the refractory materials from dolomites.

7 Jun 2007

Effect of Li Alloying on the Microstructure and Mechanical Properties of Ni3Al

This article explores the effects of additions of lithium to produce intermetallic phases in the Ni-Al alloy system and evaluates the mechanical properties and structural characteristics produced. The results show an improvement in the mechanical properties.

7 Jun 2007

Editorial Highlights

The Current State of the Global Semiconductor Market

The global semiconductor market has entered an exciting period. Demand for chip technology is both driving the industry as well as hindering it, with current chip shortages predicted to last for some time. Current trends will likely shape the future of the industry, which is set to continue to show

How are Graphene Batteries Made?

The primary distinction between graphene-based batteries and solid-state batteries lies in the composition of either electrode. Although the cathode is commonly changed, carbon allotropes can also be employed in fabricating anodes.

What Role Will The IoT Play In The Electric Vehicle Industry?

In recent years, the IoT is rapidly being introduced into almost all sectors, but it has particular importance in the EV industry.

Latest Articles

Zeta Potential – Using Zeta Potential Measurements to Study Particle Adsorption

Reducing Milling Start Up Times Using Online Particle Size Analysis

Cast Irons – Specifications for Gray Iron and Ductile Irons

The Role of Ceramics and Nanoceramics in Medical Applications

Overgrinding in the Cement Industry – Real Time Particle Size Analysis Reducing Running Costs

Reaction Bonding of Zinc Oxide (RBZO) to Produce ZnO-Based Varistors

Cadmium Sulfide Pellets for Growth of Thin Films by Pulsed Laser Deposition

Study of Ceramic Seal For Solid Oxide Fuel Cells

Phase Evolution During Preparation of Spinel-Containing Refractory Cements, From Argentine Dolomite

Effect of Li Alloying on the Microstructure and Mechanical Properties of Ni3Al

The Evolution and Versatility of Benchtop XRD

A New Approach to Flash Point Testing

How to Use AFM to Study 2D Materials and Superlattices

Benchtop micro-XRF System for the Elemental Analysis of Samples

Cubic Instruments' Laser Raman Gas Analyzers: Reliable Solutions for Monitoring Industrial Process Gases

Advanced Masterbatch and Compounding for Polymers and Plastics

Sponsored Content

Using Polymer-Based Printers and Injectors for Metals and Ceramics

A Guide to ASTM D790 and its Importance

Introduction to Polymer Analysis Using Near-Infrared and Raman Spectroscopy

Ethylene Oxide Regulations: How Changes Might Play Out Under New Administration

Editorial Highlights

The Current State of the Global Semiconductor Market

How are Graphene Batteries Made?

What Role Will The IoT Play In The Electric Vehicle Industry?

Latest Articles

The Evolution and Versatility of Benchtop XRD

A New Approach to Flash Point Testing

How to Use AFM to Study 2D Materials and Superlattices

1Researchers Develop AI Framework for Optimizing Battery Electrolytes

2Halogen-Free Polymer Electrolytes: A Sustainable Energy Solution

3Smart Coatings: Thermally Responsive Polymer Brushes for Advanced Applications

4Upcycling LDPE: Transforming Plastic Waste into High-Value Graphite

5Green Steel: How Hydrogen and Electric Ironmaking Drive Innovation

6Sustainable Energy Harvesting: Turning Plastic Waste into Power

Sponsored Content

Editorial Highlights